linux/drivers/i2c, branch v5.8-rc3

i2c: core: check returned size of emulated smbus block read

2020-06-26T08:18:35Z

If the i2c bus driver ignores the I2C_M_RECV_LEN flag (as some of them do), it is possible for an I2C_SMBUS_BLOCK_DATA read issued on some random device to return an arbitrary value in the first byte (and nothing else). When this happens, i2c_smbus_xfer_emulated() will happily write past the end of the supplied data buffer, thus causing Bad Things to happen. To prevent this, check the size before copying the data block and return an error if it is too large. Fixes: 209d27c3b167 ("i2c: Emulate SMBus block read over I2C") Signed-off-by: Mans Rullgard [wsa: use better errno] Signed-off-by: Wolfram Sang

i2c: fsi: Fix the port number field in status register

2020-06-25T22:25:05Z

The port number field in the status register was not correct, so fix it. Fixes: d6ffb6300116 ("i2c: Add FSI-attached I2C master algorithm") Signed-off-by: Eddie James Signed-off-by: Joel Stanley Signed-off-by: Wolfram Sang

i2c: designware: Adjust bus speed independently of ACPI

2020-06-23T19:24:33Z

John Stultz reported that commit f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") caused a regression on the HiKey board where adv7511 HDMI bridge driver wasn't probing anymore due the I2C bus failed to start. It seems the change caused the bus speed being zero when CONFIG_ACPI not set and neither speed based on "clock-frequency" device property or default fast mode is set. Fix this by splitting i2c_dw_acpi_adjust_bus_speed() to i2c_dw_acpi_round_bus_speed() and i2c_dw_adjust_bus_speed(), where the latter one has the code that runs independently of ACPI. Fixes: f9288fcc5c615 ("i2c: designware: Move ACPI parts into common module") Reported-by: John Stultz Signed-off-by: Andy Shevchenko Acked-by: Jarkko Nikula Tested-by: John Stultz Signed-off-by: Wolfram Sang

i2c: smbus: Fix spelling mistake in the comments

2020-06-19T08:09:16Z

Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel Signed-off-by: Wolfram Sang

i2c: remove deprecated i2c_new_device API

2020-06-19T07:20:28Z

All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang

Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2020-06-13T20:29:16Z

Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues

Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2020-06-13T20:12:38Z

Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21Z

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

i2c: Drop stray comma in MODULE_AUTHOR statements

2020-06-11T10:32:14Z

It is not the common usage to have a comma between the name and the email address, so remove it. Signed-off-by: Jean Delvare Cc: Kukjin Kim Cc: Krzysztof Kozlowski Reviewed-by: Jarkko Nikula Signed-off-by: Wolfram Sang

i2c: npcm7xx: npcm_i2caddr[] can be static

2020-06-11T10:30:47Z

Fixes: f54736925a4f ("i2c: npcm7xx: Add support for slave mode for Nuvoton") Signed-off-by: kernel test robot Signed-off-by: Wolfram Sang