linux/drivers/acpi/thermal.c, branch v2.6.39-rc2

ACPI / Fan: Rework the handling of power resources

2011-01-12T09:48:45Z

Use the new function acpi_bus_update_power() for manipulating power resources used by ACPI fan devices, which allows them to be put into the right state during initialization and resume. Consequently, remove the flags.force_power_state field from struct acpi_device, which is not necessary any more. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown

ACPI thermal: remove deprecated procfs I/F

2010-10-16T02:03:01Z

Remove the deprecated ACPI thermal driver procfs I/F, as stated in the changelog of commit 43d9f87b79804f2d75d9d8a81c862b179f055a15 sysfs I/F is available at /sys/class/thermal/thermal_zoneX/ Signed-off-by: Zhang Rui Signed-off-by: Len Brown

ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS

2010-08-15T04:37:33Z

Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/ is already available and has been working for years w/o any problem. The ACPI thermal procfs I/F will be removed in 2.6.37. Signed-off-by: Zhang Rui Signed-off-by: Len Brown

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release

2010-03-15T01:30:17Z

ACPI thermal: Don't invalidate thermal zone if critical trip point is bad

2010-02-23T05:43:36Z

V2: Corrected integer/long conversion. Some BIOSes return a negative value for the critical trip point. Especially since Windows 2006... We currently invalidate the whole thermal zone in this case. But it may still be needed for cooling, also without critical trip point. This patch invalidates the critical trip point if no _CRT function is found or if it returns negative values, but does not invalidate the whole thermal zone in this case. Reference: http://bugzilla.novell.com/show_bug.cgi?id=531547 Signed-off-by: Thomas Renninger Tested-by: clarkt@cnsp.com Acked-by: Zhang Rui Signed-off-by: Len Brown

ACPI thermal: Check for thermal zone requirement

2010-02-19T06:48:48Z

ACPI spec says (11.5 Thermal Zone Interface Requirements): A thermal zone must contain at least one trip point (critical, near critical, active, or passive) Check this once at init time. Signed-off-by: Thomas Renninger Tested-by: clarkt@cnsp.com Signed-off-by: Len Brown

acpi: thermal: display forced passive trip points in proc

2009-11-05T23:17:03Z

Users can force a passive trip point for a thermal zone that does not have _PSV defined in ACPI by setting the passive attribute in sysfs. It's useful to display such trip points in /proc/acpi/thermal_zone. .../TZ1/cooling_mode: .../TZ1/polling_frequency:polling frequency: 10 seconds .../TZ1/state:state: ok .../TZ1/temperature:temperature: 53 C .../TZ1/trip_points:critical (S5): 110 C .../TZ1/trip_points:passive (forced): 95 C And if not set (passive is 0): .../TZ1/trip_points:passive (forced): Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown

ACPI: Move definition of PREFIX from acpi_bus.h to internal..h

2009-08-28T23:57:27Z

Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown

thermal: Fix polling frequency for systems without passive cooling

2009-04-18T05:05:23Z

The polling interval (in deciseconds) was accidently interpreted as being in milliseconds in one codepath, resulting in excessively frequent polling. Ensure that the conversion is performed. Signed-off-by: Matthew Garrett Acked-by: Zhang Rui Signed-off-by: Len Brown