linux/arch/ia64/sn/pci/tioce_provider.c, branch v3.5-rc4

[IA64] genirq fixup for SGI/SN

2012-02-22T19:11:06Z

This patch allows the system to boot and enables the console and at least some hardware drivers, as well as some platform error handling. Tested on a variety of SGI Altix system without issues. Signed-off-by: Dimitri Sivanich Tested-by: Raymund Will Signed-off-by: Tony Luck

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[IA64] Convert ia64 to use int-ll64.h

2009-06-17T16:33:49Z

It is generally agreed that it would be beneficial for u64 to be an unsigned long long on all architectures. ia64 (in common with several other 64-bit architectures) currently uses unsigned long. Migrating piecemeal is too painful; this giant patch fixes all compilation warnings and errors that come as a result of switching to use int-ll64.h. Note that userspace will still see __u64 defined as unsigned long. This is important as it affects C++ name mangling. [Updated by Tony Luck to change efi.h:efi_freemem_callback_t to use u64 for start/end rather than unsigned long] Signed-off-by: Matthew Wilcox Signed-off-by: Tony Luck

[IA64] minor irq handler cleanups

2008-04-22T15:56:58Z

- remove unused 'irq' argument from pfm_do_interrupt_handler() - remove pointless cast to void* - add KERN_xxx prefix to printk() - remove braces around singleton C statement - in tioce_provider.c, start tioce_dma_consistent() and tioce_error_intr_handler() function declarations in column 0 This change's main purpose is to prepare for the patchset in jgarzik/misc-2.6.git#irq-remove, that explores removal of the never-used 'irq' argument in each interrupt handler. Signed-off-by: Jeff Garzik Signed-off-by: Tony Luck

[IA64] remove remaining FUNCTION occurrences

2008-03-06T17:19:27Z

__FUNCTION__ is gcc-specific, use __func__ Long lines have been kept where they exist, some small spacing changes have been done. Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Tony Luck

Change pci_raw_ops to pci_raw_read/write

2008-02-10T20:52:46Z

We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by: Matthew Wilcox Signed-off-by: Linus Torvalds

[IA64] Two trivial spelling fixes

2007-12-19T01:02:21Z

s/addres/address/ s/performanc/performance/ Signed-off-by: Joe Perches Signed-off-by: Tony Luck

[IA64] SN: Add support for CPU disable

2007-09-01T09:49:57Z

Add additional support for CPU disable on SN platforms. Correctly setup the smp_affinity mask for I/O error IRQs. Restrict the use of the feature to Altix 4000 and 450 systems running with a CPU disable capable PROM, and do not allow disabling of CPU 0. Signed-off-by: John Keller Signed-off-by: Tony Luck

[IA64] Make SN2 PCI code use ioremap rather than manually mangle the address

2007-06-26T20:35:45Z

This one changes the SN2 specific PCI drivers to use ioremap() for obtaining the real address to access for the PCI registers instead of manually calculating them with __IA64_UNCACHED_OFFSET. The patch should have no real change when running on a normal Linux kernel, but when running as a paravirtualized it is needed. Signed-off-by: Jes Sorenson Signed-off-by: Tony Luck

[IA64] spelling fixes: arch/ia64/

2007-05-11T21:55:43Z

Spelling and apostrophe fixes in arch/ia64/. Signed-off-by: Simon Arlott Signed-off-by: Tony Luck