Linux Kernel (branches are rebased on master from time to time) https://sre.ring0.de/linux/atom?h=master 2022-12-19T14:54:17Z 2022-12-19T14:54:17Z Linus Torvalds torvalds@linux-foundation.org 2022-12-19T14:54:17Z urn:sha1:9322af3e6aeae04c7eda3e6a0c977e97a13cf6ed Pull dmaengine updates from Vinod Koul: "New support: - Qualcomm SDM670, SM6115 and SM6375 GPI controller support - Ingenic JZ4755 dmaengine support - Removal of iop-adma driver Updates: - Tegra support for dma-channel-mask - at_hdmac cleanup and virt-chan support for this driver" * tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits) dmaengine: Revert "dmaengine: remove s3c24xx driver" dmaengine: tegra: Add support for dma-channel-mask dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA dmaengine: idxd: Remove linux/msi.h include dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375 dmaengine: idxd: Fix crc_val field for completion record dmaengine: at_hdmac: Convert driver to use virt-dma dmaengine: at_hdmac: Remove unused member of at_dma_chan dmaengine: at_hdmac: Rename "chan_common" to "dma_chan" dmaengine: at_hdmac: Rename "dma_common" to "dma_device" dmaengine: at_hdmac: Use bitfield access macros dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c dmaengine: at_hdmac: Set include entries in alphabetic order dmaengine: at_hdmac: Use pm_ptr() dmaengine: at_hdmac: Use devm_clk_get() dmaengine: at_hdmac: Use devm_platform_ioremap_resource dmaengine: at_hdmac: Use devm_kzalloc() and struct_size() dmaengine: at_hdmac: Introduce atc_get_llis_residue() dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts ... 2022-12-19T14:40:58Z Linus Torvalds torvalds@linux-foundation.org 2022-12-19T14:40:58Z urn:sha1:e79041113b19b8c7b8410d862d4a3630debded58 Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ... 2022-12-16T11:54:54Z Linus Torvalds torvalds@linux-foundation.org 2022-12-16T11:54:54Z urn:sha1:71a7507afbc3f27c346898f13ab9bfd918613c34 Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ... 2022-12-16T11:31:56Z Linus Torvalds torvalds@linux-foundation.org 2022-12-16T11:31:56Z urn:sha1:dd6f9b17cd7af68b6a5090deedf1f5e84f66f4e6 Pull tty/serial driver updates from Greg KH: "Here is the "big" set of tty/serial driver changes for 6.2-rc1. As in previous kernel releases, nothing big here at all, just some small incremental serial/tty layer cleanups and some individual driver additions and fixes. Highlights are: - serial helper macros from Jiri Slaby to reduce the amount of duplicated code in serial drivers - api cleanups and consolidations from Ilpo Järvinen in lots of serial drivers - the usual set of n_gsm fixes from Daniel Starke as that code gets exercised more - TIOCSTI is finally able to be disabled if requested (security hardening feature from Kees Cook) - fsl_lpuart driver fixes and features added - other small serial driver additions and fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: atmel: don't stop the transmitter when doing PIO serial: atmel: cleanup atmel_start+stop_tx() tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API serial: sunsab: Fix error handling in sunsab_init() serial: altera_uart: fix locking in polling mode serial: pch: Fix PCI device refcount leak in pch_request_dma() tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused tty: serial: fsl_lpuart: Add runtime pm support tty: serial: fsl_lpuart: enable wakeup source for lpuart serdev: Replace poll loop by readx_poll_timeout() macro tty: synclink_gt: unwind actions in error path of net device open serial: stm32: move dma_request_chan() before clk_prepare_enable() dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity' serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle. serial: amba-pl011: avoid SBSA UART accessing DMACR register tty: serial: altera_jtaguart: remove struct altera_jtaguart tty: serial: altera_jtaguart: use uart_port::read_status_mask tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars() n_tty: Rename tail to old_tail in n_tty_read() ... 2022-12-16T11:22:53Z Linus Torvalds torvalds@linux-foundation.org 2022-12-16T11:22:53Z urn:sha1:58bcac11fd94f950abc7b8466c5ceac7be07a00e Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ... 2022-12-15T17:45:51Z Linus Torvalds torvalds@linux-foundation.org 2022-12-15T17:45:51Z urn:sha1:c0f234ff90a211272138be1611ba53f3155ebd78 Pull gpio updates from Bartosz Golaszewski: "We have a new GPIO multiplexer driver, bunch of driver updates and refactoring in the core GPIO library. GPIO core: - teach gpiolib to work with software nodes for HW description - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on the number of GPIOS since the allocation became entirely dynamic - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC controller, Freescale PCIe and Ethernet controller, Himax LCDs and Mediatek mt2701 - refactor OF quirk code - some general refactoring of the OF and ACPI code, adding new helpers, minor tweaks and fixes, making fwnode usage consistent etc. GPIO uAPI: - fix an issue where the user-space can trigger a NULL-pointer dereference in the kernel by opening a device file, forcing a driver unbind and then calling one of the syscalls on the associated file descriptor New drivers: - add gpio-latch: a new GPIO multiplexer based on latches connected to other GPIOs Driver updates: - convert i2c GPIO expanders to using .probe_new() - drop the gpio-sta2x11 driver - factor out common code for the ACCES IDIO-16 family of controllers and use this new library wherever applicable in drivers - add DT support to gpio-hisi - allow building gpio-davinci as a module and increase its maxItems property - add support for a new model to gpio-pca9570 - other minor changes to various drivers" * tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits) gpio: sim: set a limit on the number of GPIOs gpiolib: protect the GPIO device against being dropped while in use by user-space gpiolib: cdev: fix NULL-pointer dereferences gpiolib: Provide to_gpio_device() helper gpiolib: Unify access to the device properties gpio: Do not include <linux/kernel.h> when not really needed. gpio: pcf857x: Convert to i2c's .probe_new() gpio: pca953x: Convert to i2c's .probe_new() gpio: max732x: Convert to i2c's .probe_new() dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names gpiolib: ensure that fwnode is properly set gpio: sl28cpld: Replace irqchip mask_invert with unmask_base gpiolib: of: Use correct fwnode for DT-probed chips gpiolib: of: Drop redundant check in of_mm_gpiochip_remove() gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode gpiolib: add support for software nodes gpiolib: consolidate GPIO lookups gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes gpiolib: acpi: change acpi_find_gpio() to accept firmware node ... 2022-12-13T21:03:06Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T21:03:06Z urn:sha1:361c89a0da59c04b1d3d33568965fe426b0f18de Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ... 2022-12-13T20:54:31Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T20:54:31Z urn:sha1:d0f3ad23cf4f4046e88eef92c608d43cad9e4f7e Pull spi updates from Mark Brown: "A busy enough release, but not for the core which has only seen very small updates. The biggest addition is the readdition of support for detailed configuration of the timings around chip selects. That had been removed for lack of use but there's been applications found for it on Atmel systems. Otherwise the updates are mostly feature additions and cleanups to existing drivers. Summary: - Provide a helper for getting device match data in a way that abstracts away which firmware interface is being used. - Re-add the spi_set_cs_timing() API for detailed configuration of the timing around chip select and support it on Atmel. - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450 FIU and Socionext F_OSPI" * tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits) spi: dt-bindings: Convert Synquacer SPI to DT schema spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode spi: spi-mtk-nor: Add recovery mechanism for dma read timeout spi: spi-fsl-lpspi: add num-cs binding for lpspi spi: spi-fsl-lpspi: support multiple cs for lpspi spi: mtk-snfi: Add snfi support for MT7986 IC spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property) spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include) spi: mediatek: Enable irq when pdata is ready spi: spi-mtk-nor: Unify write buffer on/off spi: intel: Add support for SFDP opcode spi: intel: Take possible chip address into account in intel_spi_read/write_reg() spi: intel: Implement adjust_op_size() spi: intel: Use ->replacement_op in intel_spi_hw_cycle() spi: cadence: Drop obsolete dependency on COMPILE_TEST spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings spi: wpcm-fiu: Add direct map support ... 2022-12-13T20:49:59Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T20:49:59Z urn:sha1:c5589c436d4646e0dc23f64264db8e04cf67c88f Pull regulator updates from Mark Brown: "Quite a quiet release for regulator, the diffstat is dominated by the I2C migration to probe_new() and the newly added MT6357 driver. We've just one framework addition and the rest is all new device support, fixes and cleanups. The framework addition is an API for requesting all regulators defined in DT, this isn't great practice but has reasonable applications when there is generic code handling devices on buses where the bus specification doesn't include power. The immediate application is MDIO but I believe there's others, it's another API that'll need an eye keeping on it for undesirable usage. Summary: - An API for requesting all regulators defined in DT - Conversion of lots of drivers to the I2C probe_new() API - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek RT6190" * tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits) regulator: core: Use different devices for resource allocation and DT lookup dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe() regulator: add mt6357 regulator regulator: dt-bindings: Add binding schema for mt6357 regulators regulator: core: fix resource leak in regulator_register() regulator: core: fix module refcount leak in set_supply() regulator: core: fix use_count leakage when handling boot-on regulator: rk808: Use dev_err_probe regulator: rk808: reduce 'struct rk808' usage regulator: Drop obsolete dependencies on COMPILE_TEST regulator: pv88080-regulator: Convert to i2c's .probe_new() regulator: pfuze100-regulator: Convert to i2c's .probe_new() regulator: isl6271a-regulator: Convert to i2c's .probe_new() regulator: fan53555: Convert to i2c's .probe_new() regulator: act8865-regulator: Convert to i2c's .probe_new() regulator: qcom-rpmh: Add support for PM8550 regulators regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550 regulator: tps65023-regulator: Convert to i2c's .probe_new() regulator: tps62360-regulator: Convert to i2c's .probe_new() ... 2022-12-13T19:59:58Z Linus Torvalds torvalds@linux-foundation.org 2022-12-13T19:59:58Z urn:sha1:a594533df0f6ca391da003f43d53b336a2d23ffa Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...