From 85fdbfb35437f5ab8a449235f2c86f410770925f Mon Sep 17 00:00:00 2001 From: pancake Date: Mon, 8 Oct 2007 00:25:56 +0200 Subject: * Finally implement the support for the FIASCO firmware format * Up version to 0.3 * Alphabetically order the help message flags * Cleaner short help message * Pseudo-api for creating firmwares (not yet finished) * Add '-F' flag to flash from a fiasco image --- doc/usage | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'doc') diff --git a/doc/usage b/doc/usage index d297505..f784b1d 100644 --- a/doc/usage +++ b/doc/usage @@ -8,6 +8,7 @@ Tablets (n770 and n800). - reboot de mother board - extract the current firmware pieces from the device (dump) - set the USB host/slave mode + - pack/unpack fiasco firmwares - fine grained R&D flags support - identify firmware pieces - dump mtd partitions (embedded mtd-utils source code) @@ -19,27 +20,29 @@ Tablets (n770 and n800). This is the help message of the tool: 
 ~$ 0xFFFF -h
-0xFFFF v0.2  // The Free Fiasco Firmware Flasher
+0xFFFF v0.3  // The Free Fiasco Firmware Flasher
  -b [arg]       boots the kernel with arguments
+ -c             console prompt mode
+ -C [/dev/mtd]  check bad blocks on mtd
+ -d [vid:pid]   injects a usb device into the supported list
+ -D [0|1|2]     sets the root device to flash (0), mmc (1) or usb (2)
  -e [path]      dump and extract pieces to path
- -r [0|1]       disable/enable R&D mode
  -f      set the given RD flags (see '-f help')
- -p [[p%]file]  piece-of-firmware % file-where-this-piece-is
- -u [fiasco]    unpack target fiasco image
- -U [0|1]       disable/enable the usb host mode
- -s [serial]    serial port console (minicom like terminal)
- -C [/dev/mtd]  check bad blocks on mtd
- -c             console prompt mode
+ -F [fiasco]    flash a fiasco firmware image
  -h             show this help message
+ -H [file]      calculate hash for file
  -i             show device information (let standby mode)
  -I [piece]     identify a firmware piece
- -l             list supported usb device ids
- -d [vid:pid]   injects a usb device into the supported list
- -D [0|1|2]     sets the root device to flash (0), mmc (1) or usb (2)
+ -l, -L         list supported usb device ids
+ -p [[p%]file]  piece-of-firmware % file-where-this-piece-is
+ -r [0|1]       disable/enable R&D mode
  -R             reboot the omap board
- -x             extract configuration entries from /dev/mtd1
+ -s [serial]    serial port console (minicom like terminal)
+ -u [fiasco]    unpack target fiasco image
+ -U [0|1]       disable/enable the usb host mode
  -v             be verbose and noisy
  -V             show 0xFFFF version information
+ -x             extract configuration entries from /dev/mtd1
 Pieces are: xloader secondary kernel initfs rootfs omap-nand
-- cgit v1.2.3