diff options
author | pancake <pancake@dazo> | 2007-06-25 15:14:14 +0200 |
---|---|---|
committer | pancake <pancake@dazo> | 2007-06-25 15:14:14 +0200 |
commit | 6521a8e9d11b8e87bb8d400238cb5a340202674e (patch) | |
tree | ec153e2e7071e3a34af2f89eb2a10367244733d5 /doc/usage | |
parent | 3728cdea3130c62f3d766df040d2cb85f1e6caa4 (diff) | |
download | 0xFFFF-6521a8e9d11b8e87bb8d400238cb5a340202674e.tar.bz2 |
* Update documentation for the 0.2 release
* Fix case0 bug of libusb in usb_device_found function
Diffstat (limited to 'doc/usage')
-rw-r--r-- | doc/usage | 43 |
1 files changed, 27 insertions, 16 deletions
@@ -8,27 +8,38 @@ Tablets (n770 and n800). - reboot de mother board - extract the current firmware pieces from the device (dump) - set the USB host/slave mode - - set the R&R mode + - fine grained R&D flags support - identify firmware pieces + - dump mtd partitions (embedded mtd-utils source code) + - reconstruct initfs from a dump + - dump config partition + - automatic piece identifier + - console mode (shell like) </pre> This is the help message of the tool: <pre> <b>~$ 0xFFFF -h</b> -0xFFFF v0.1 - The Open Free Fiasco Firmware Flasher - -b [arg] boots the kernel with arguments - -e [path] dump the firmware pieces into the path - -p [[p:]file] piece-of-firmware : file-where-this-piece-is - -r [0|1] disable/enable R&D mode - -u [fiasco] unpack target fiasco image - -U [0|1] disable/enable the usb host mode - -h show this help message - -i show device information (let standby mode) - -I [piece] identify a firmware piece - -l list supported usb device ids - -d [vid:pid] injects a usb device into the supported list - -R reboot the omap board - -v be verbose and noisy - -V show 0xFFFF version information +0xFFFF v0.2 // The Free Fiasco Firmware Flasher + -b [arg] boots the kernel with arguments + -e [path] dump and extract pieces to path + -r [0|1] disable/enable R&D mode + -f <flags> set the given RD flags (see '-f help') + -p [[p%]file] piece-of-firmware % file-where-this-piece-is + -u [fiasco] unpack target fiasco image + -U [0|1] disable/enable the usb host mode + -s [serial] serial port console (minicom like terminal) + -C [/dev/mtd] check bad blocks on mtd + -c console prompt mode + -h show this help message + -i show device information (let standby mode) + -I [piece] identify a firmware piece + -l list supported usb device ids + -d [vid:pid] injects a usb device into the supported list + -D [0|1|2] sets the root device to flash (0), mmc (1) or usb (2) + -R reboot the omap board + -x extract configuration entries from /dev/mtd1 + -v be verbose and noisy + -V show 0xFFFF version information Pieces are: xloader secondary kernel initfs rootfs omap-nand </pre> |