diff options
93 files changed, 7218 insertions, 925 deletions
diff --git a/Documentation/clk.txt b/Documentation/clk.txt index c9c399af7c08..1fee72f4d331 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -68,21 +68,27 @@ the operations defined in clk.h: int (*is_enabled)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); - long (*round_rate)(struct clk_hw *hw, unsigned long, - unsigned long *); + long (*round_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate); long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long); + int (*set_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate, u8 index); + unsigned long parent_rate, + u8 index); unsigned long (*recalc_accuracy)(struct clk_hw *hw, - unsigned long parent_accuracy); + unsigned long parent_accuracy); void (*init)(struct clk_hw *hw); + int (*debug_init)(struct clk_hw *hw, + struct dentry *dentry); }; Part 3 - hardware clk implementations diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt index 56d1f4961075..5286e260fcae 100644 --- a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt +++ b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt @@ -10,12 +10,12 @@ This binding uses the common clock binding: Required properties: - compatible - Shall have one of the following values: - - "brcm,bcm11351-root-ccu" - - "brcm,bcm11351-aon-ccu" - - "brcm,bcm11351-hub-ccu" - - "brcm,bcm11351-master-ccu" - - "brcm,bcm11351-slave-ccu" + Shall have a value of the form "brcm,<model>-<which>-ccu", + where <model> is a Broadcom SoC model number and <which> is + the name of a defined CCU. For example: + "brcm,bcm11351-root-ccu" + The compatible strings used for each supported SoC family + are defined below. - reg Shall define the base and range of the address space containing clock control registers @@ -26,12 +26,48 @@ Required properties: Shall be an ordered list of strings defining the names of the clocks provided by the CCU. +Device tree example: + + slave_ccu: slave_ccu { + compatible = "brcm,bcm11351-slave-ccu"; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "uartb4"; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + uart@3e002000 { + compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x3e002000 0x1000>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +BCM281XX family +--------------- +CCU compatible string values for SoCs in the BCM281XX family are: + "brcm,bcm11351-root-ccu" + "brcm,bcm11351-aon-ccu" + "brcm,bcm11351-hub-ccu" + "brcm,bcm11351-master-ccu" + "brcm,bcm11351-slave-ccu" -BCM281XX family SoCs use Kona CCUs. The following table defines -the set of CCUs and clock specifiers for BCM281XX clocks. When -a clock consumer references a clocks, its symbolic specifier -(rather than its numeric index value) should be used. These -specifiers are defined in "include/dt-bindings/clock/bcm281xx.h". +The following table defines the set of CCUs and clock specifiers for +BCM281XX family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm281xx.h" CCU Clock Type Index Specifier --- ----- ---- ----- --------- @@ -64,30 +100,40 @@ specifiers are defined in "include/dt-bindings/clock/bcm281xx.h". slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM -Device tree example: +BCM21664 family +--------------- +CCU compatible string values for SoCs in the BCM21664 family are: + "brcm,bcm21664-root-ccu" + "brcm,bcm21664-aon-ccu" + "brcm,bcm21664-master-ccu" + "brcm,bcm21664-slave-ccu" - slave_ccu: slave_ccu { - compatible = "brcm,bcm11351-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "uartb4"; - }; +The following table defines the set of CCUs and clock specifiers for +BCM21664 family clocks. When a clock consumer references a clocks, +its symbolic specifier (rather than its numeric index value) should +be used. These specifiers are defined in: + "include/dt-bindings/clock/bcm21664.h" - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; + CCU Clock Type Index Specifier + --- ----- ---- ----- --------- + root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M - uart@3e002000 { - compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; - reg = <0x3e002000 0x1000>; - clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - }; + aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER + + master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1 + master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2 + master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3 + master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4 + master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP + master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP + master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP + master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP + + slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB + slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2 + slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3 + slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4 + slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1 + slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2 + slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3 + slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4 diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 700e7aac3717..f15787817d6b 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -44,10 +44,9 @@ For example: clocks by index. The names should reflect the clock output signal names for the device. -clock-indices: If the identifyng number for the clocks in the node - is not linear from zero, then the this mapping allows - the mapping of identifiers into the clock-output-names - array. +clock-indices: If the identifying number for the clocks in the node + is not linear from zero, then this allows the mapping of + identifiers into the clock-output-names array. For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: @@ -58,7 +57,7 @@ For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: clock-output-names = "clka", "clkb"; } - This ensures we do not have any empty nodes in clock-output-names + This ensures we do not have any empty strings in clock-output-names ==Clock consumers== diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt index 48ea0ad8ad46..0641a663ad69 100644 --- a/Documentation/devicetree/bindings/clock/fixed-clock.txt +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt @@ -12,7 +12,6 @@ Required properties: Optional properties: - clock-accuracy : accuracy of clock in ppb (parts per billion). Should be a single cell. -- gpios : From common gpio binding; gpio connection to clock enable pin. - clock-output-names : From common clock binding. Example: diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt new file mode 100644 index 000000000000..7894a64887cb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt @@ -0,0 +1,31 @@ +* Hisilicon Hix5hd2 Clock Controller + +The hix5hd2 clock controller generates and supplies clock to various +controllers within the hix5hd2 SoC. + +Required Properties: + +- compatible: should be "hisilicon,hix5hd2-clock" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>. + +Examples: + clock: clock@f8a22000 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0xf8a22000 0x1000>; + #clock-cells = <1>; + }; + + uart0: uart@f8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt new file mode 100644 index 000000000000..3ce97cfe999b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt @@ -0,0 +1,29 @@ +AXM5516 clock driver bindings +----------------------------- + +Required properties : +- compatible : shall contain "lsi,axm5516-clks" +- reg : shall contain base register location and length +- #clock-cells : shall contain 1 + +The consumer specifies the desired clock by having the clock ID in its "clocks" +phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of +supported clock IDs. + +Example: + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + }; + }; + diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index 307a503c5db8..dc5ea5b22da9 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -29,6 +29,11 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove: 2 = l2clk (L2 Cache clock derived from CPU0 clock) 3 = ddrclk (DDR controller clock derived from CPU0 clock) +The following is a list of provided IDs and clock names on Orion5x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = ddrclk (DDR controller clock derived from CPU0 clock) + Required properties: - compatible : shall be one of the following: "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks @@ -38,6 +43,9 @@ Required properties: "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC + "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC + "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC - reg : shall be the register address of the Sample-At-Reset (SAR) register - #clock-cells : from common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 767401f42871..9cfcb4f2bc97 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -4,9 +4,12 @@ Qualcomm Global Clock & Reset Controller Binding Required properties : - compatible : shall contain only one of the following: + "qcom,gcc-apq8064" "qcom,gcc-msm8660" "qcom,gcc-msm8960" "qcom,gcc-msm8974" + "qcom,gcc-msm8974pro" + "qcom,gcc-msm8974pro-ac" - reg : shall contain base register location and length - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 6c3c0847e4fd..8a92b5fb3540 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -11,6 +11,7 @@ Required Properties: - compatible: Must be one of the following - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks + - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks - "renesas,cpg-mstp-clock" for generic MSTP gate clocks diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt new file mode 100644 index 000000000000..2c03302f86ed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt @@ -0,0 +1,41 @@ +These bindings should be considered EXPERIMENTAL for now. + +* Renesas R8A7740 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs +and several fixed ratio and variable ratio dividers. + +Required Properties: + + - compatible: Must be "renesas,r8a7740-cpg-clocks" + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the three parent clocks + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are + "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b", + "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp". + + - renesas,mode: board-specific settings of the MD_CK* bits + + +Example +------- + +cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7740-cpg-clocks"; + reg = <0xe6150000 0x10000>; + clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>; + #clock-cells = <1>; + clock-output-names = "system", "pllc0", "pllc1", + "pllc2", "r", + "usb24s", + "i", "zg", "b", "m1", "hp", + "hpp", "usbp", "s", "zb", "m3", + "cp"; +}; + +&cpg_clocks { + renesas,mode = <0x05>; +}; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt new file mode 100644 index 000000000000..ed3c8cb12f4e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt @@ -0,0 +1,27 @@ +* Renesas R8A7779 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7779. It includes one PLL and +several fixed ratio dividers + +Required Properties: + + - compatible: Must be "renesas,r8a7779-cpg-clocks" + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "plla", + "z", "zs", "s", "s1", "p", "b", "out". + + +Example +------- + + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0 0xffc80000 0 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", "s1", "p", + "b", "out"; + }; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt new file mode 100644 index 000000000000..91b3a3467150 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -0,0 +1,43 @@ +* Allwinner sunxi MMC controller + +The highspeed MMC host controller on Allwinner SoCs provides an interface +for MMC, SD and SDIO types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.5 as well +as the speed of SD standard 3.0. +Absolute maximum transfer rate is 200MB/s + +Required properties: + - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc" + - reg : mmc controller base registers + - clocks : a list with 2 phandle + clock specifier pairs + - clock-names : must contain "ahb" and "mmc" + - interrupts : mmc controller interrupt + +Optional properties: + - resets : phandle + reset specifier pair + - reset-names : must contain "ahb" + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + - Within .dtsi: + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + - Within dts: + mmc0: mmc@01c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index f98da9025d7d..7ca9e1918bad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -815,6 +815,11 @@ F: arch/arm/boot/dts/at91*.dtsi F: arch/arm/boot/dts/sama*.dts F: arch/arm/boot/dts/sama*.dtsi +ARM/ATMEL AT91 Clock Support +M: Boris Brezillon <boris.brezillon@free-electrons.com> +S: Maintained +F: drivers/clk/at91 + ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring <robh@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 08a44d41b672..8b366822bb43 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include "dt-bindings/clock/bcm21664.h" + #include "skeleton.dtsi" / { @@ -43,7 +45,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e000000 0x118>; - clocks = <&uartb_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -53,7 +55,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e001000 0x118>; - clocks = <&uartb2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -63,7 +65,7 @@ compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; status = "disabled"; reg = <0x3e002000 0x118>; - clocks = <&uartb3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; @@ -85,7 +87,7 @@ compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&hub_timer_clk>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { @@ -106,7 +108,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio1_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; @@ -114,7 +116,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio2_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; @@ -122,7 +124,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio3_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; @@ -130,7 +132,7 @@ compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sdio4_clk>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; @@ -140,7 +142,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc1_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; @@ -150,7 +152,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc2_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; @@ -160,7 +162,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc3_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; @@ -170,105 +172,149 @@ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bsc4_clk>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { - bsc1_clk: bsc1 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; - #clock-cells = <0>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges; - bsc2_clk: bsc2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc3_clk: bsc3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + bbl_32k_clk: bbl_32k { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; }; - bsc4_clk: bsc4 { + ref_13m_clk: ref_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - pmu_bsc_clk: pmu_bsc { + var_13m_clk: var_13m { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; - #clock-cells = <0>; }; - hub_timer_clk: hub_timer { - compatible = "fixed-clock"; - clock-frequency = <32768>; + dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; }; - pwm_clk: pwm { + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; - #clock-cells = <0>; }; - sdio1_clk: sdio1 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_52m_clk: ref_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio2_clk: sdio2 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + var_52m_clk: var_52m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio3_clk: sdio3 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; }; - sdio4_clk: sdio4 { - compatible = "fixed-clock"; - clock-frequency = <48000000>; + ref_96m_clk: ref_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - tmon_1m_clk: tmon_1m { - compatible = "fixed-clock"; - clock-frequency = <1000000>; + var_96m_clk: var_96m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; }; - uartb_clk: uartb { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_104m_clk: ref_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb2_clk: uartb2 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + var_104m_clk: var_104m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; }; - uartb3_clk: uartb3 { - compatible = "fixed-clock"; - clock-frequency = <13000000>; + ref_156m_clk: ref_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; }; - usb_otg_ahb_clk: usb_otg_ahb { - compatible = "fixed-clock"; - clock-frequency = <52000000>; + var_156m_clk: var_156m { #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; }; }; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 3a2196481b11..9f9c5ae5359b 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -58,12 +58,12 @@ config COMMON_CLK_SI570 clock generators. config COMMON_CLK_S2MPS11 - tristate "Clock driver for S2MPS11/S5M8767 MFD" + tristate "Clock driver for S2MPS1X/S5M8767 MFD" depends on MFD_SEC_CORE ---help--- - This driver supports S2MPS11/S5M8767 crystal oscillator clock. These - multi-function devices have 3 fixed-rate oscillators, clocked at - 32KHz each. + This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator + clock. These multi-function devices have two (S2MPS14) or three + (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. config CLK_TWL6040 tristate "External McPDM functional clock from twl6040" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 50b2a7ebd747..567f10259029 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o # hardware specific clock types # please keep this section sorted lexicographically by file/directory path name obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o +obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o @@ -32,8 +33,10 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_AT91) += at91/ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/ +obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/ obj-$(CONFIG_ARCH_HIP04) += hisilicon/ +obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/ obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index a7262fb8ce55..75506e53075b 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -6,4 +6,4 @@ config CLK_BCM_KONA help Enable common clock framework support for Broadcom SoCs using "Kona" style clock control units, including those - in the BCM281xx family. + in the BCM281xx and BCM21664 families. diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index cf93359aa862..6297d05a9a10 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o +obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o diff --git a/drivers/clk/bcm/clk-bcm21664.c b/drivers/clk/bcm/clk-bcm21664.c new file mode 100644 index 000000000000..eeae4cad2281 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm21664.c @@ -0,0 +1,290 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * Copyright 2014 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "clk-kona.h" +#include "dt-bindings/clock/bcm21664.h" + +#define BCM21664_CCU_COMMON(_name, _capname) \ + KONA_CCU_COMMON(BCM21664, _name, _capname) + +/* Root CCU */ + +static struct peri_clk_data frac_1m_data = { + .gate = HW_SW_GATE(0x214, 16, 0, 1), + .clocks = CLOCKS("ref_crystal"), +}; + +static struct ccu_data root_ccu_data = { + BCM21664_CCU_COMMON(root, ROOT), + /* no policy control */ + .kona_clks = { + [BCM21664_ROOT_CCU_FRAC_1M] = + KONA_CLK(root, frac_1m, peri), + [BCM21664_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* AON CCU */ + +static struct peri_clk_data hub_timer_data = { + .gate = HW_SW_GATE(0x0414, 16, 0, 1), + .hyst = HYST(0x0414, 8, 9), + .clocks = CLOCKS("bbl_32k", + "frac_1m", + "dft_19_5m"), + .sel = SELECTOR(0x0a10, 0, 2), + .trig = TRIGGER(0x0a40, 4), +}; + +static struct ccu_data aon_ccu_data = { + BCM21664_CCU_COMMON(aon, AON), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_AON_CCU_HUB_TIMER] = + KONA_CLK(aon, hub_timer, peri), + [BCM21664_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Master CCU */ + +static struct peri_clk_data sdio1_data = { + .gate = HW_SW_GATE(0x0358, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a28, 0, 3), + .div = DIVIDER(0x0a28, 4, 14), + .trig = TRIGGER(0x0afc, 9), +}; + +static struct peri_clk_data sdio2_data = { + .gate = HW_SW_GATE(0x035c, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a2c, 0, 3), + .div = DIVIDER(0x0a2c, 4, 14), + .trig = TRIGGER(0x0afc, 10), +}; + +static struct peri_clk_data sdio3_data = { + .gate = HW_SW_GATE(0x0364, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a34, 0, 3), + .div = DIVIDER(0x0a34, 4, 14), + .trig = TRIGGER(0x0afc, 12), +}; + +static struct peri_clk_data sdio4_data = { + .gate = HW_SW_GATE(0x0360, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_52m", + "ref_52m", + "var_96m", + "ref_96m"), + .sel = SELECTOR(0x0a30, 0, 3), + .div = DIVIDER(0x0a30, 4, 14), + .trig = TRIGGER(0x0afc, 11), +}; + +static struct peri_clk_data sdio1_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0358, 18, 2, 3), +}; + +static struct peri_clk_data sdio2_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x035c, 18, 2, 3), +}; + +static struct peri_clk_data sdio3_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0364, 18, 2, 3), +}; + +static struct peri_clk_data sdio4_sleep_data = { + .clocks = CLOCKS("ref_32k"), /* Verify */ + .gate = HW_SW_GATE(0x0360, 18, 2, 3), +}; + +static struct ccu_data master_ccu_data = { + BCM21664_CCU_COMMON(master, MASTER), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_MASTER_CCU_SDIO1] = + KONA_CLK(master, sdio1, peri), + [BCM21664_MASTER_CCU_SDIO2] = + KONA_CLK(master, sdio2, peri), + [BCM21664_MASTER_CCU_SDIO3] = + KONA_CLK(master, sdio3, peri), + [BCM21664_MASTER_CCU_SDIO4] = + KONA_CLK(master, sdio4, peri), + [BCM21664_MASTER_CCU_SDIO1_SLEEP] = + KONA_CLK(master, sdio1_sleep, peri), + [BCM21664_MASTER_CCU_SDIO2_SLEEP] = + KONA_CLK(master, sdio2_sleep, peri), + [BCM21664_MASTER_CCU_SDIO3_SLEEP] = + KONA_CLK(master, sdio3_sleep, peri), + [BCM21664_MASTER_CCU_SDIO4_SLEEP] = + KONA_CLK(master, sdio4_sleep, peri), + [BCM21664_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Slave CCU */ + +static struct peri_clk_data uartb_data = { + .gate = HW_SW_GATE(0x0400, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a10, 0, 2), + .div = FRAC_DIVIDER(0x0a10, 4, 12, 8), + .trig = TRIGGER(0x0afc, 2), +}; + +static struct peri_clk_data uartb2_data = { + .gate = HW_SW_GATE(0x0404, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a14, 0, 2), + .div = FRAC_DIVIDER(0x0a14, 4, 12, 8), + .trig = TRIGGER(0x0afc, 3), +}; + +static struct peri_clk_data uartb3_data = { + .gate = HW_SW_GATE(0x0408, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_156m", + "ref_156m"), + .sel = SELECTOR(0x0a18, 0, 2), + .div = FRAC_DIVIDER(0x0a18, 4, 12, 8), + .trig = TRIGGER(0x0afc, 4), +}; + +static struct peri_clk_data bsc1_data = { + .gate = HW_SW_GATE(0x0458, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a64, 0, 3), + .trig = TRIGGER(0x0afc, 23), +}; + +static struct peri_clk_data bsc2_data = { + .gate = HW_SW_GATE(0x045c, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a68, 0, 3), + .trig = TRIGGER(0x0afc, 24), +}; + +static struct peri_clk_data bsc3_data = { + .gate = HW_SW_GATE(0x0470, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a7c, 0, 3), + .trig = TRIGGER(0x0afc, 18), +}; + +static struct peri_clk_data bsc4_data = { + .gate = HW_SW_GATE(0x0474, 18, 2, 3), + .clocks = CLOCKS("ref_crystal", + "var_104m", + "ref_104m", + "var_13m", + "ref_13m"), + .sel = SELECTOR(0x0a80, 0, 3), + .trig = TRIGGER(0x0afc, 19), +}; + +static struct ccu_data slave_ccu_data = { + BCM21664_CCU_COMMON(slave, SLAVE), + .policy = { + .enable = CCU_LVM_EN(0x0034, 0), + .control = CCU_POLICY_CTL(0x000c, 0, 1, 2), + }, + .kona_clks = { + [BCM21664_SLAVE_CCU_UARTB] = + KONA_CLK(slave, uartb, peri), + [BCM21664_SLAVE_CCU_UARTB2] = + KONA_CLK(slave, uartb2, peri), + [BCM21664_SLAVE_CCU_UARTB3] = + KONA_CLK(slave, uartb3, peri), + [BCM21664_SLAVE_CCU_BSC1] = + KONA_CLK(slave, bsc1, peri), + [BCM21664_SLAVE_CCU_BSC2] = + KONA_CLK(slave, bsc2, peri), + [BCM21664_SLAVE_CCU_BSC3] = + KONA_CLK(slave, bsc3, peri), + [BCM21664_SLAVE_CCU_BSC4] = + KONA_CLK(slave, bsc4, peri), + [BCM21664_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Device tree match table callback functions */ + +static void __init kona_dt_root_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&root_ccu_data, node); +} + +static void __init kona_dt_aon_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&aon_ccu_data, node); +} + +static void __init kona_dt_master_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&master_ccu_data, node); +} + +static void __init kona_dt_slave_ccu_setup(struct device_node *node) +{ + kona_dt_ccu_setup(&slave_ccu_data, node); +} + +CLK_OF_DECLARE(bcm21664_root_ccu, BCM21664_DT_ROOT_CCU_COMPAT, + kona_dt_root_ccu_setup); +CLK_OF_DECLARE(bcm21664_aon_ccu, BCM21664_DT_AON_CCU_COMPAT, + kona_dt_aon_ccu_setup); +CLK_OF_DECLARE(bcm21664_master_ccu, BCM21664_DT_MASTER_CCU_COMPAT, + kona_dt_master_ccu_setup); +CLK_OF_DECLARE(bcm21664_slave_ccu, BCM21664_DT_SLAVE_CCU_COMPAT, + kona_dt_slave_ccu_setup); diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c index 3c66de696aeb..502a487d62c5 100644 --- a/drivers/clk/bcm/clk-bcm281xx.c +++ b/drivers/clk/bcm/clk-bcm281xx.c @@ -15,14 +15,10 @@ #include "clk-kona.h" #include "dt-bindings/clock/bcm281xx.h" -/* bcm11351 CCU device tree "compatible" strings */ -#define BCM11351_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu" -#define BCM11351_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu" -#define BCM11351_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu" -#define BCM11351_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu" -#define BCM11351_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu" +#define BCM281XX_CCU_COMMON(_name, _ucase_name) \ + KONA_CCU_COMMON(BCM281XX, _name, _ucase_name) -/* Root CCU clocks */ +/* Root CCU */ static struct peri_clk_data frac_1m_data = { .gate = HW_SW_GATE(0x214, 16, 0, 1), @@ -31,7 +27,16 @@ static struct peri_clk_data frac_1m_data = { .clocks = CLOCKS("ref_crystal"), }; -/* AON CCU clocks */ +static struct ccu_data root_ccu_data = { + BCM281XX_CCU_COMMON(root, ROOT), + .kona_clks = { + [BCM281XX_ROOT_CCU_FRAC_1M] = + KONA_CLK(root, frac_1m, peri), + [BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* AON CCU */ static struct peri_clk_data hub_timer_data = { .gate = HW_SW_GATE(0x0414, 16, 0, 1), @@ -60,7 +65,20 @@ static struct peri_clk_data pmu_bsc_var_data = { .trig = TRIGGER(0x0a40, 2), }; -/* Hub CCU clocks */ +static struct ccu_data aon_ccu_data = { + BCM281XX_CCU_COMMON(aon, AON), + .kona_clks = { + [BCM281XX_AON_CCU_HUB_TIMER] = + KONA_CLK(aon, hub_timer, peri), + [BCM281XX_AON_CCU_PMU_BSC] = + KONA_CLK(aon, pmu_bsc, peri), + [BCM281XX_AON_CCU_PMU_BSC_VAR] = + KONA_CLK(aon, pmu_bsc_var, peri), + [BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Hub CCU */ static struct peri_clk_data tmon_1m_data = { .gate = HW_SW_GATE(0x04a4, 18, 2, 3), @@ -70,7 +88,16 @@ static struct peri_clk_data tmon_1m_data = { .trig = TRIGGER(0x0e84, 1), }; -/* Master CCU clocks */ +static struct ccu_data hub_ccu_data = { + BCM281XX_CCU_COMMON(hub, HUB), + .kona_clks = { + [BCM281XX_HUB_CCU_TMON_1M] = + KONA_CLK(hub, tmon_1m, peri), + [BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Master CCU */ static struct peri_clk_data sdio1_data = { .gate = HW_SW_GATE(0x0358, 18, 2, 3), @@ -153,7 +180,28 @@ static struct peri_clk_data hsic2_12m_data = { .trig = TRIGGER(0x0afc, 5), }; -/* Slave CCU clocks */ +static struct ccu_data master_ccu_data = { + BCM281XX_CCU_COMMON(master, MASTER), + .kona_clks = { + [BCM281XX_MASTER_CCU_SDIO1] = + KONA_CLK(master, sdio1, peri), + [BCM281XX_MASTER_CCU_SDIO2] = + KONA_CLK(master, sdio2, peri), + [BCM281XX_MASTER_CCU_SDIO3] = + KONA_CLK(master, sdio3, peri), + [BCM281XX_MASTER_CCU_SDIO4] = + KONA_CLK(master, sdio4, peri), + [BCM281XX_MASTER_CCU_USB_IC] = + KONA_CLK(master, usb_ic, peri), + [BCM281XX_MASTER_CCU_HSIC2_48M] = + KONA_CLK(master, hsic2_48m, peri), + [BCM281XX_MASTER_CCU_HSIC2_12M] = + KONA_CLK(master, hsic2_12m, peri), + [BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; + +/* Slave CCU */ static struct peri_clk_data uartb_data = { .gate = HW_SW_GATE(0x0400, 18, 2, 3), @@ -261,156 +309,67 @@ static struct peri_clk_data pwm_data = { .trig = TRIGGER(0x0afc, 15), }; -/* - * CCU setup routines - * - * These are called from kona_dt_ccu_setup() to initialize the array - * of clocks provided by the CCU. Once allocated, the entries in - * the array are initialized by calling kona_clk_setup() with the - * initialization data for each clock. They return 0 if successful - * or an error code otherwise. - */ -static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate root clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m); - - return 0; -} - -static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_AON_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate aon clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer); - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc); - PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var); - - return 0; -} - -static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate hub clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m); - - return 0; -} - -static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate master clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m); - PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m); - - return 0; -} - -static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu) -{ - struct clk **clks; - size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT; - - clks = kzalloc(count * sizeof(*clks), GFP_KERNEL); - if (!clks) { - pr_err("%s: failed to allocate slave clocks\n", __func__); - return -ENOMEM; - } - ccu->data.clks = clks; - ccu->data.clk_num = count; - - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3); - PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm); - - return 0; -} +static struct ccu_data slave_ccu_data = { + BCM281XX_CCU_COMMON(slave, SLAVE), + .kona_clks = { + [BCM281XX_SLAVE_CCU_UARTB] = + KONA_CLK(slave, uartb, peri), + [BCM281XX_SLAVE_CCU_UARTB2] = + KONA_CLK(slave, uartb2, peri), + [BCM281XX_SLAVE_CCU_UARTB3] = + KONA_CLK(slave, uartb3, peri), + [BCM281XX_SLAVE_CCU_UARTB4] = + KONA_CLK(slave, uartb4, peri), + [BCM281XX_SLAVE_CCU_SSP0] = + KONA_CLK(slave, ssp0, peri), + [BCM281XX_SLAVE_CCU_SSP2] = + KONA_CLK(slave, ssp2, peri), + [BCM281XX_SLAVE_CCU_BSC1] = + KONA_CLK(slave, bsc1, peri), + [BCM281XX_SLAVE_CCU_BSC2] = + KONA_CLK(slave, bsc2, peri), + [BCM281XX_SLAVE_CCU_BSC3] = + KONA_CLK(slave, bsc3, peri), + [BCM281XX_SLAVE_CCU_PWM] = + KONA_CLK(slave, pwm, peri), + [BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK, + }, +}; /* Device tree match table callback functions */ static void __init kona_dt_root_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup); + kona_dt_ccu_setup(&root_ccu_data, node); } static void __init kona_dt_aon_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup); + kona_dt_ccu_setup(&aon_ccu_data, node); } static void __init kona_dt_hub_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup); + kona_dt_ccu_setup(&hub_ccu_data, node); } static void __init kona_dt_master_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup); + kona_dt_ccu_setup(&master_ccu_data, node); } static void __init kona_dt_slave_ccu_setup(struct device_node *node) { - kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup); + kona_dt_ccu_setup(&slave_ccu_data, node); } -CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT, kona_dt_root_ccu_setup); -CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT, kona_dt_aon_ccu_setup); -CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT, kona_dt_hub_ccu_setup); -CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT, kona_dt_master_ccu_setup); -CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT, +CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT, kona_dt_slave_ccu_setup); diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c index 54a06526f64f..e5aededdd322 100644 --- a/drivers/clk/bcm/clk-kona-setup.c +++ b/drivers/clk/bcm/clk-kona-setup.c @@ -25,6 +25,31 @@ LIST_HEAD(ccu_list); /* The list of set up CCUs */ /* Validity checking */ +static bool ccu_data_offsets_valid(struct ccu_data *ccu) +{ + struct ccu_policy *ccu_policy = &ccu->policy; + u32 limit; + + limit = ccu->range - sizeof(u32); + limit = round_down(limit, sizeof(u32)); + if (ccu_policy_exists(ccu_policy)) { + if (ccu_policy->enable.offset > limit) { + pr_err("%s: bad policy enable offset for %s " + "(%u > %u)\n", __func__, + ccu->name, ccu_policy->enable.offset, limit); + return false; + } + if (ccu_policy->control.offset > limit) { + pr_err("%s: bad policy control offset for %s " + "(%u > %u)\n", __func__, + ccu->name, ccu_policy->control.offset, limit); + return false; + } + } + + return true; +} + static bool clk_requires_trigger(struct kona_clk *bcm_clk) { struct peri_clk_data *peri = bcm_clk->u.peri; @@ -54,7 +79,9 @@ static bool clk_requires_trigger(struct kona_clk *bcm_clk) static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) { struct peri_clk_data *peri; + struct bcm_clk_policy *policy; struct bcm_clk_gate *gate; + struct bcm_clk_hyst *hyst; struct bcm_clk_div *div; struct bcm_clk_sel *sel; struct bcm_clk_trig *trig; @@ -64,19 +91,41 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk) BUG_ON(bcm_clk->type != bcm_clk_peri); peri = bcm_clk->u.peri; - name = bcm_clk->name; + name = bcm_clk->init_data.name; range = bcm_clk->ccu->range; limit = range - sizeof(u32); limit = round_down(limit, sizeof(u32)); + policy = &peri->policy; + if (policy_exists(policy)) { + if (policy->offset > limit) { + pr_err("%s: bad policy offset for %s (%u > %u)\n", + __func__, name, policy->offset, limit); + return false; + } + } + gate = &peri->gate; + hyst = &peri->hyst; if (gate_exists(gate)) { if (gate->offset > limit) { pr_err("%s: bad gate offset for %s (%u > %u)\n", __func__, name, gate->offset, limit); return false; } + + if (hyst_exists(hyst)) { + if (hyst->offset > limit) { + pr_err("%s: bad hysteresis offset for %s " + "(%u > %u)\n", __func__, + name, hyst->offset, limit); + return false; + } + } + } else if (hyst_exists(hyst)) { + pr_err("%s: hysteresis but no gate for %s\n", __func__, name); + return false; } div = &peri->div; @@ -167,6 +216,36 @@ static bool bitfield_valid(u32 shift, u32 width, const char *field_name, return true; } +static bool +ccu_policy_valid(struct ccu_policy *ccu_policy, const char *ccu_name) +{ + struct bcm_lvm_en *enable = &ccu_policy->enable; + struct bcm_policy_ctl *control; + + if (!bit_posn_valid(enable->bit, "policy enable", ccu_name)) + return false; + + control = &ccu_policy->control; + if (!bit_posn_valid(control->go_bit, "policy control GO", ccu_name)) + return false; + + if (!bit_posn_valid(control->atl_bit, "policy control ATL", ccu_name)) + return false; + + if (!bit_posn_valid(control->ac_bit, "policy control AC", ccu_name)) + return false; + + return true; +} + +static bool policy_valid(struct bcm_clk_policy *policy, const char *clock_name) +{ + if (!bit_posn_valid(policy->bit, "policy", clock_name)) + return false; + + return true; +} + /* * All gates, if defined, have a status bit, and for hardware-only * gates, that's it. Gates that can be software controlled also @@ -196,6 +275,17 @@ static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name, return true; } +static bool hyst_valid(struct bcm_clk_hyst *hyst, const char *clock_name) +{ + if (!bit_posn_valid(hyst->en_bit, "hysteresis enable", clock_name)) + return false; + + if (!bit_posn_valid(hyst->val_bit, "hysteresis value", clock_name)) + return false; + + return true; +} + /* * A selector bitfield must be valid. Its parent_sel array must * also be reasonable for the field. @@ -312,7 +402,9 @@ static bool peri_clk_data_valid(struct kona_clk *bcm_clk) { struct peri_clk_data *peri; + struct bcm_clk_policy *policy; struct bcm_clk_gate *gate; + struct bcm_clk_hyst *hyst; struct bcm_clk_sel *sel; struct bcm_clk_div *div; struct bcm_clk_div *pre_div; @@ -330,11 +422,20 @@ peri_clk_data_valid(struct kona_clk *bcm_clk) return false; peri = bcm_clk->u.peri; - name = bcm_clk->name; + name = bcm_clk->init_data.name; + + policy = &peri->policy; + if (policy_exists(policy) && !policy_valid(policy, name)) + return false; + gate = &peri->gate; if (gate_exists(gate) && !gate_valid(gate, "gate", name)) return false; + hyst = &peri->hyst; + if (hyst_exists(hyst) && !hyst_valid(hyst, name)) + return false; + sel = &peri->sel; if (selector_exists(sel)) { if (!sel_valid(sel, "selector", name)) @@ -567,7 +668,6 @@ static void peri_clk_teardown(struct peri_clk_data *data, struct clk_init_data *init_data) { clk_sel_teardown(&data->sel, init_data); - init_data->ops = NULL; } /* @@ -576,10 +676,9 @@ static void peri_clk_teardown(struct peri_clk_data *data, * that can be assigned if the clock has one or more parent clocks * associated with it. */ -static int peri_clk_setup(struct ccu_data *ccu, struct peri_clk_data *data, - struct clk_init_data *init_data) +static int +peri_clk_setup(struct peri_clk_data *data, struct clk_init_data *init_data) { - init_data->ops = &kona_peri_clk_ops; init_data->flags = CLK_IGNORE_UNUSED; return clk_sel_setup(data->clocks, &data->sel, init_data); @@ -617,39 +716,26 @@ static void kona_clk_teardown(struct clk *clk) bcm_clk_teardown(bcm_clk); } -struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, - enum bcm_clk_type type, void *data) +struct clk *kona_clk_setup(struct kona_clk *bcm_clk) { - struct kona_clk *bcm_clk; - struct clk_init_data *init_data; + struct clk_init_data *init_data = &bcm_clk->init_data; struct clk *clk = NULL; - bcm_clk = kzalloc(sizeof(*bcm_clk), GFP_KERNEL); - if (!bcm_clk) { - pr_err("%s: failed to allocate bcm_clk for %s\n", __func__, - name); - return NULL; - } - bcm_clk->ccu = ccu; - bcm_clk->name = name; - - init_data = &bcm_clk->init_data; - init_data->name = name; - switch (type) { + switch (bcm_clk->type) { case bcm_clk_peri: - if (peri_clk_setup(ccu, data, init_data)) - goto out_free; + if (peri_clk_setup(bcm_clk->u.data, init_data)) + return NULL; break; default: - data = NULL; - break; + pr_err("%s: clock type %d invalid for %s\n", __func__, + (int)bcm_clk->type, init_data->name); + return NULL; } - bcm_clk->type = type; - bcm_clk->u.data = data; /* Make sure everything makes sense before we set it up */ if (!kona_clk_valid(bcm_clk)) { - pr_err("%s: clock data invalid for %s\n", __func__, name); + pr_err("%s: clock data invalid for %s\n", __func__, + init_data->name); goto out_teardown; } @@ -657,7 +743,7 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, clk = clk_register(NULL, &bcm_clk->hw); if (IS_ERR(clk)) { pr_err("%s: error registering clock %s (%ld)\n", __func__, - name, PTR_ERR(clk)); + init_data->name, PTR_ERR(clk)); goto out_teardown; } BUG_ON(!clk); @@ -665,8 +751,6 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, return clk; out_teardown: bcm_clk_teardown(bcm_clk); -out_free: - kfree(bcm_clk); return NULL; } @@ -675,50 +759,64 @@ static void ccu_clks_teardown(struct ccu_data *ccu) { u32 i; - for (i = 0; i < ccu->data.clk_num; i++) - kona_clk_teardown(ccu->data.clks[i]); - kfree(ccu->data.clks); + for (i = 0; i < ccu->clk_data.clk_num; i++) + kona_clk_teardown(ccu->clk_data.clks[i]); + kfree(ccu->clk_data.clks); } static void kona_ccu_teardown(struct ccu_data *ccu) { - if (!ccu) - return; - + kfree(ccu->clk_data.clks); + ccu->clk_data.clks = NULL; if (!ccu->base) - goto done; + return; of_clk_del_provider(ccu->node); /* safe if never added */ ccu_clks_teardown(ccu); list_del(&ccu->links); of_node_put(ccu->node); + ccu->node = NULL; iounmap(ccu->base); -done: - kfree(ccu->name); - kfree(ccu); + ccu->base = NULL; +} + +static bool ccu_data_valid(struct ccu_data *ccu) +{ + struct ccu_policy *ccu_policy; + + if (!ccu_data_offsets_valid(ccu)) + return false; + + ccu_policy = &ccu->policy; + if (ccu_policy_exists(ccu_policy)) + if (!ccu_policy_valid(ccu_policy, ccu->name)) + return false; + + return true; } /* * Set up a CCU. Call the provided ccu_clks_setup callback to * initialize the array of clocks provided by the CCU. */ -void __init kona_dt_ccu_setup(struct device_node *node, - int (*ccu_clks_setup)(struct ccu_data *)) +void __init kona_dt_ccu_setup(struct ccu_data *ccu, + struct device_node *node) { - struct ccu_data *ccu; struct resource res = { 0 }; resource_size_t range; + unsigned int i; int ret; - ccu = kzalloc(sizeof(*ccu), GFP_KERNEL); - if (ccu) - ccu->name = kstrdup(node->name, GFP_KERNEL); - if (!ccu || !ccu->name) { - pr_err("%s: unable to allocate CCU struct for %s\n", - __func__, node->name); - kfree(ccu); + if (ccu->clk_data.clk_num) { + size_t size; - return; + size = ccu->clk_data.clk_num * sizeof(*ccu->clk_data.clks); + ccu->clk_data.clks = kzalloc(size, GFP_KERNEL); + if (!ccu->clk_data.clks) { + pr_err("%s: unable to allocate %u clocks for %s\n", + __func__, ccu->clk_data.clk_num, node->name); + return; + } } ret = of_address_to_resource(node, 0, &res); @@ -736,24 +834,33 @@ void __init kona_dt_ccu_setup(struct device_node *node, } ccu->range = (u32)range; + + if (!ccu_data_valid(ccu)) { + pr_err("%s: ccu data not valid for %s\n", __func__, node->name); + goto out_err; + } + ccu->base = ioremap(res.start, ccu->range); if (!ccu->base) { pr_err("%s: unable to map CCU registers for %s\n", __func__, node->name); goto out_err; } - - spin_lock_init(&ccu->lock); - INIT_LIST_HEAD(&ccu->links); ccu->node = of_node_get(node); - list_add_tail(&ccu->links, &ccu_list); - /* Set up clocks array (in ccu->data) */ - if (ccu_clks_setup(ccu)) - goto out_err; + /* + * Set up each defined kona clock and save the result in + * the clock framework clock array (in ccu->data). Then + * register as a provider for these clocks. + */ + for (i = 0; i < ccu->clk_data.clk_num; i++) { + if (!ccu->kona_clks[i].ccu) + continue; + ccu->clk_data.clks[i] = kona_clk_setup(&ccu->kona_clks[i]); + } - ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->data); + ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->clk_data); if (ret) { pr_err("%s: error adding ccu %s as provider (%d)\n", __func__, node->name, ret); diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c index db11a87449f2..95af2e665dd3 100644 --- a/drivers/clk/bcm/clk-kona.c +++ b/drivers/clk/bcm/clk-kona.c @@ -16,6 +16,14 @@ #include <linux/delay.h> +/* + * "Policies" affect the frequencies of bus clocks provided by a + * CCU. (I believe these polices are named "Deep Sleep", "Economy", + * "Normal", and "Turbo".) A lower policy number has lower power + * consumption, and policy 2 is the default. + */ +#define CCU_POLICY_COUNT 4 + #define CCU_ACCESS_PASSWORD 0xA5A500 #define CLK_GATE_DELAY_LOOP 2000 @@ -207,9 +215,154 @@ __ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want) return true; udelay(1); } + pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__, + ccu->name, reg_offset, bit, want ? "set" : "clear"); + return false; } +/* Policy operations */ + +static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync) +{ + struct bcm_policy_ctl *control = &ccu->policy.control; + u32 offset; + u32 go_bit; + u32 mask; + bool ret; + + /* If we don't need to control policy for this CCU, we're done. */ + if (!policy_ctl_exists(control)) + return true; + + offset = control->offset; + go_bit = control->go_bit; + + /* Ensure we're not busy before we start */ + ret = __ccu_wait_bit(ccu, offset, go_bit, false); + if (!ret) { + pr_err("%s: ccu %s policy engine wouldn't go idle\n", + __func__, ccu->name); + return false; + } + + /* + * If it's a synchronous request, we'll wait for the voltage + * and frequency of the active load to stabilize before + * returning. To do this we select the active load by + * setting the ATL bit. + * + * An asynchronous request instead ramps the voltage in the + * background, and when that process stabilizes, the target + * load is copied to the active load and the CCU frequency + * is switched. We do this by selecting the target load + * (ATL bit clear) and setting the request auto-copy (AC bit + * set). + * + * Note, we do NOT read-modify-write this register. + */ + mask = (u32)1 << go_bit; + if (sync) + mask |= 1 << control->atl_bit; + else + mask |= 1 << control->ac_bit; + __ccu_write(ccu, offset, mask); + + /* Wait for indication that operation is complete. */ + ret = __ccu_wait_bit(ccu, offset, go_bit, false); + if (!ret) + pr_err("%s: ccu %s policy engine never started\n", + __func__, ccu->name); + + return ret; +} + +static bool __ccu_policy_engine_stop(struct ccu_data *ccu) +{ + struct bcm_lvm_en *enable = &ccu->policy.enable; + u32 offset; + u32 enable_bit; + bool ret; + + /* If we don't need to control policy for this CCU, we're done. */ + if (!policy_lvm_en_exists(enable)) + return true; + + /* Ensure we're not busy before we start */ + offset = enable->offset; + enable_bit = enable->bit; + ret = __ccu_wait_bit(ccu, offset, enable_bit, false); + if (!ret) { + pr_err("%s: ccu %s policy engine already stopped\n", + __func__, ccu->name); + return false; + } + + /* Now set the bit to stop the engine (NO read-modify-write) */ + __ccu_write(ccu, offset, (u32)1 << enable_bit); + + /* Wait for indication that it has stopped. */ + ret = __ccu_wait_bit(ccu, offset, enable_bit, false); + if (!ret) + pr_err("%s: ccu %s policy engine never stopped\n", + __func__, ccu->name); + + return ret; +} + +/* + * A CCU has four operating conditions ("policies"), and some clocks + * can be disabled or enabled based on which policy is currently in + * effect. Such clocks have a bit in a "policy mask" register for + * each policy indicating whether the clock is enabled for that + * policy or not. The bit position for a clock is the same for all + * four registers, and the 32-bit registers are at consecutive + * addresses. + */ +static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy) +{ + u32 offset; + u32 mask; + int i; + bool ret; + + if (!policy_exists(policy)) + return true; + + /* + * We need to stop the CCU policy engine to allow update + * of our policy bits. + */ + if (!__ccu_policy_engine_stop(ccu)) { + pr_err("%s: unable to stop CCU %s policy engine\n", + __func__, ccu->name); + return false; + } + + /* + * For now, if a clock defines its policy bit we just mark + * it "enabled" for all four policies. + */ + offset = policy->offset; + mask = (u32)1 << policy->bit; + for (i = 0; i < CCU_POLICY_COUNT; i++) { + u32 reg_val; + + reg_val = __ccu_read(ccu, offset); + reg_val |= mask; + __ccu_write(ccu, offset, reg_val); + offset += sizeof(u32); + } + + /* We're done updating; fire up the policy engine again. */ + ret = __ccu_policy_engine_start(ccu, true); + if (!ret) + pr_err("%s: unable to restart CCU %s policy engine\n", + __func__, ccu->name); + + return ret; +} + /* Gate operations */ /* Determine whether a clock is gated. CCU lock must be held. */ @@ -374,6 +527,35 @@ static int clk_gate(struct ccu_data *ccu, const char *name, return -EIO; } +/* Hysteresis operations */ + +/* + * If a clock gate requires a turn-off delay it will have + * "hysteresis" register bits defined. The first, if set, enables + * the delay; and if enabled, the second bit determines whether the + * delay is "low" or "high" (1 means high). For now, if it's + * defined for a clock, we set it. + */ +static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst) +{ + u32 offset; + u32 reg_val; + u32 mask; + + if (!hyst_exists(hyst)) + return true; + + offset = hyst->offset; + mask = (u32)1 << hyst->en_bit; + mask |= (u32)1 << hyst->val_bit; + + reg_val = __ccu_read(ccu, offset); + reg_val |= mask; + __ccu_write(ccu, offset, reg_val); + + return true; +} + /* Trigger operations */ /* @@ -806,7 +988,7 @@ static int kona_peri_clk_enable(struct clk_hw *hw) struct kona_clk *bcm_clk = to_kona_clk(hw); struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; - return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true); + return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true); } static void kona_peri_clk_disable(struct clk_hw *hw) @@ -814,7 +996,7 @@ static void kona_peri_clk_disable(struct clk_hw *hw) struct kona_clk *bcm_clk = to_kona_clk(hw); struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate; - (void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false); + (void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false); } static int kona_peri_clk_is_enabled(struct clk_hw *hw) @@ -849,6 +1031,58 @@ static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate, rate ? rate : 1, *parent_rate, NULL); } +static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, struct clk **best_parent) +{ + struct kona_clk *bcm_clk = to_kona_clk(hw); + struct clk *clk = hw->clk; + struct clk *current_parent; + unsigned long parent_rate; + unsigned long best_delta; + unsigned long best_rate; + u32 parent_count; + u32 which; + + /* + * If there is no other parent to choose, use the current one. + * Note: We don't honor (or use) CLK_SET_RATE_NO_REPARENT. + */ + WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT); + parent_count = (u32)bcm_clk->init_data.num_parents; + if (parent_count < 2) + return kona_peri_clk_round_rate(hw, rate, best_parent_rate); + + /* Unless we can do better, stick with current parent */ + current_parent = clk_get_parent(clk); + parent_rate = __clk_get_rate(current_parent); + best_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate); + best_delta = abs(best_rate - rate); + + /* Check whether any other parent clock can produce a better result */ + for (which = 0; which < parent_count; which++) { + struct clk *parent = clk_get_parent_by_index(clk, which); + unsigned long delta; + unsigned long other_rate; + + BUG_ON(!parent); + if (parent == current_parent) + continue; + + /* We don't support CLK_SET_RATE_PARENT */ + parent_rate = __clk_get_rate(parent); + other_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate); + delta = abs(other_rate - rate); + if (delta < best_delta) { + best_delta = delta; + best_rate = other_rate; + *best_parent = parent; + *best_parent_rate = parent_rate; + } + } + + return best_rate; +} + static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index) { struct kona_clk *bcm_clk = to_kona_clk(hw); @@ -872,12 +1106,13 @@ static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index) ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index); if (ret == -ENXIO) { - pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name); + pr_err("%s: gating failure for %s\n", __func__, + bcm_clk->init_data.name); ret = -EIO; /* Don't proliferate weird errors */ } else if (ret == -EIO) { pr_err("%s: %strigger failed for %s\n", __func__, trig == &data->pre_trig ? "pre-" : "", - bcm_clk->name); + bcm_clk->init_data.name); } return ret; @@ -936,10 +1171,12 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate, ret = divider_write(bcm_clk->ccu, &data->gate, &data->div, &data->trig, scaled_div); if (ret == -ENXIO) { - pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name); + pr_err("%s: gating failure for %s\n", __func__, + bcm_clk->init_data.name); ret = -EIO; /* Don't proliferate weird errors */ } else if (ret == -EIO) { - pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name); + pr_err("%s: trigger failed for %s\n", __func__, + bcm_clk->init_data.name); } return ret; @@ -950,7 +1187,7 @@ struct clk_ops kona_peri_clk_ops = { .disable = kona_peri_clk_disable, .is_enabled = kona_peri_clk_is_enabled, .recalc_rate = kona_peri_clk_recalc_rate, - .round_rate = kona_peri_clk_round_rate, + .determine_rate = kona_peri_clk_determine_rate, .set_parent = kona_peri_clk_set_parent, .get_parent = kona_peri_clk_get_parent, .set_rate = kona_peri_clk_set_rate, @@ -961,15 +1198,24 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk) { struct ccu_data *ccu = bcm_clk->ccu; struct peri_clk_data *peri = bcm_clk->u.peri; - const char *name = bcm_clk->name; + const char *name = bcm_clk->init_data.name; struct bcm_clk_trig *trig; BUG_ON(bcm_clk->type != bcm_clk_peri); + if (!policy_init(ccu, &peri->policy)) { + pr_err("%s: error initializing policy for %s\n", + __func__, name); + return false; + } if (!gate_init(ccu, &peri->gate)) { pr_err("%s: error initializing gate for %s\n", __func__, name); return false; } + if (!hyst_init(ccu, &peri->hyst)) { + pr_err("%s: error initializing hyst for %s\n", __func__, name); + return false; + } if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) { pr_err("%s: error initializing divider for %s\n", __func__, name); @@ -1014,13 +1260,13 @@ bool __init kona_ccu_init(struct ccu_data *ccu) { unsigned long flags; unsigned int which; - struct clk **clks = ccu->data.clks; + struct clk **clks = ccu->clk_data.clks; bool success = true; flags = ccu_lock(ccu); __ccu_write_enable(ccu); - for (which = 0; which < ccu->data.clk_num; which++) { + for (which = 0; which < ccu->clk_data.clk_num; which++) { struct kona_clk *bcm_clk; if (!clks[which]) diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h index dee690951bb6..2537b3072910 100644 --- a/drivers/clk/bcm/clk-kona.h +++ b/drivers/clk/bcm/clk-kona.h @@ -43,8 +43,14 @@ #define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag)) #define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag))) +/* CCU field state tests */ + +#define ccu_policy_exists(ccu_policy) ((ccu_policy)->enable.offset != 0) + /* Clock field state tests */ +#define policy_exists(policy) ((policy)->offset != 0) + #define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS) #define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED) #define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW) @@ -54,6 +60,8 @@ #define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED) +#define hyst_exists(hyst) ((hyst)->offset != 0) + #define divider_exists(div) FLAG_TEST(div, DIV, EXISTS) #define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED) #define divider_has_fraction(div) (!divider_is_fixed(div) && \ @@ -62,6 +70,9 @@ #define selector_exists(sel) ((sel)->width != 0) #define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS) +#define policy_lvm_en_exists(enable) ((enable)->offset != 0) +#define policy_ctl_exists(control) ((control)->offset != 0) + /* Clock type, used to tell common block what it's part of */ enum bcm_clk_type { bcm_clk_none, /* undefined clock type */ @@ -71,25 +82,26 @@ enum bcm_clk_type { }; /* - * Each CCU defines a mapped area of memory containing registers - * used to manage clocks implemented by the CCU. Access to memory - * within the CCU's space is serialized by a spinlock. Before any - * (other) address can be written, a special access "password" value - * must be written to its WR_ACCESS register (located at the base - * address of the range). We keep track of the name of each CCU as - * it is set up, and maintain them in a list. + * CCU policy control for clocks. Clocks can be enabled or disabled + * based on the CCU policy in effect. One bit in each policy mask + * register (one per CCU policy) represents whether the clock is + * enabled when that policy is effect or not. The CCU policy engine + * must be stopped to update these bits, and must be restarted again + * afterward. */ -struct ccu_data { - void __iomem *base; /* base of mapped address space */ - spinlock_t lock; /* serialization lock */ - bool write_enabled; /* write access is currently enabled */ - struct list_head links; /* for ccu_list */ - struct device_node *node; - struct clk_onecell_data data; - const char *name; - u32 range; /* byte range of address space */ +struct bcm_clk_policy { + u32 offset; /* first policy mask register offset */ + u32 bit; /* bit used in all mask registers */ }; +/* Policy initialization macro */ + +#define POLICY(_offset, _bit) \ + { \ + .offset = (_offset), \ + .bit = (_bit), \ + } + /* * Gating control and status is managed by a 32-bit gate register. * @@ -195,6 +207,22 @@ struct bcm_clk_gate { .flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \ } +/* Gate hysteresis for clocks */ +struct bcm_clk_hyst { + u32 offset; /* hyst register offset (normally CLKGATE) */ + u32 en_bit; /* bit used to enable hysteresis */ + u32 val_bit; /* if enabled: 0 = low delay; 1 = high delay */ +}; + +/* Hysteresis initialization macro */ + +#define HYST(_offset, _en_bit, _val_bit) \ + { \ + .offset = (_offset), \ + .en_bit = (_en_bit), \ + .val_bit = (_val_bit), \ + } + /* * Each clock can have zero, one, or two dividers which change the * output rate of the clock. Each divider can be either fixed or @@ -360,7 +388,9 @@ struct bcm_clk_trig { } struct peri_clk_data { + struct bcm_clk_policy policy; struct bcm_clk_gate gate; + struct bcm_clk_hyst hyst; struct bcm_clk_trig pre_trig; struct bcm_clk_div pre_div; struct bcm_clk_trig trig; @@ -373,8 +403,7 @@ struct peri_clk_data { struct kona_clk { struct clk_hw hw; - struct clk_init_data init_data; - const char *name; /* name of this clock */ + struct clk_init_data init_data; /* includes name of this clock */ struct ccu_data *ccu; /* ccu this clock is associated with */ enum bcm_clk_type type; union { @@ -385,14 +414,92 @@ struct kona_clk { #define to_kona_clk(_hw) \ container_of(_hw, struct kona_clk, hw) -/* Exported globals */ +/* Initialization macro for an entry in a CCU's kona_clks[] array. */ +#define KONA_CLK(_ccu_name, _clk_name, _type) \ + { \ + .init_data = { \ + .name = #_clk_name, \ + .ops = &kona_ ## _type ## _clk_ops, \ + }, \ + .ccu = &_ccu_name ## _ccu_data, \ + .type = bcm_clk_ ## _type, \ + .u.data = &_clk_name ## _data, \ + } +#define LAST_KONA_CLK { .type = bcm_clk_none } -extern struct clk_ops kona_peri_clk_ops; +/* + * CCU policy control. To enable software update of the policy + * tables the CCU policy engine must be stopped by setting the + * software update enable bit (LVM_EN). After an update the engine + * is restarted using the GO bit and either the GO_ATL or GO_AC bit. + */ +struct bcm_lvm_en { + u32 offset; /* LVM_EN register offset */ + u32 bit; /* POLICY_CONFIG_EN bit in register */ +}; + +/* Policy enable initialization macro */ +#define CCU_LVM_EN(_offset, _bit) \ + { \ + .offset = (_offset), \ + .bit = (_bit), \ + } + +struct bcm_policy_ctl { + u32 offset; /* POLICY_CTL register offset */ + u32 go_bit; + u32 atl_bit; /* GO, GO_ATL, and GO_AC bits */ + u32 ac_bit; +}; + +/* Policy control initialization macro */ +#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit) \ + { \ + .offset = (_offset), \ + .go_bit = (_go_bit), \ + .ac_bit = (_ac_bit), \ + .atl_bit = (_atl_bit), \ + } + +struct ccu_policy { + struct bcm_lvm_en enable; + struct bcm_policy_ctl control; +}; + +/* + * Each CCU defines a mapped area of memory containing registers + * used to manage clocks implemented by the CCU. Access to memory + * within the CCU's space is serialized by a spinlock. Before any + * (other) address can be written, a special access "password" value + * must be written to its WR_ACCESS register (located at the base + * address of the range). We keep track of the name of each CCU as + * it is set up, and maintain them in a list. + */ +struct ccu_data { + void __iomem *base; /* base of mapped address space */ + spinlock_t lock; /* serialization lock */ + bool write_enabled; /* write access is currently enabled */ + struct ccu_policy policy; + struct list_head links; /* for ccu_list */ + struct device_node *node; + struct clk_onecell_data clk_data; + const char *name; + u32 range; /* byte range of address space */ + struct kona_clk kona_clks[]; /* must be last */ +}; -/* Help functions */ +/* Initialization for common fields in a Kona ccu_data structure */ +#define KONA_CCU_COMMON(_prefix, _name, _ccuname) \ + .name = #_name "_ccu", \ + .lock = __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock), \ + .links = LIST_HEAD_INIT(_name ## _ccu_data.links), \ + .clk_data = { \ + .clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT, \ + } + +/* Exported globals */ -#define PERI_CLK_SETUP(clks, ccu, id, name) \ - clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data) +extern struct clk_ops kona_peri_clk_ops; /* Externally visible functions */ @@ -401,10 +508,9 @@ extern u64 scaled_div_max(struct bcm_clk_div *div); extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths); -extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name, - enum bcm_clk_type type, void *data); -extern void __init kona_dt_ccu_setup(struct device_node *node, - int (*ccu_clks_setup)(struct ccu_data *)); +extern struct clk *kona_clk_setup(struct kona_clk *bcm_clk); +extern void __init kona_dt_ccu_setup(struct ccu_data *ccu, + struct device_node *node); extern bool __init kona_ccu_init(struct ccu_data *ccu); #endif /* _CLK_KONA_H */ diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile new file mode 100644 index 000000000000..2a36ab710a07 --- /dev/null +++ b/drivers/clk/berlin/Makefile @@ -0,0 +1,4 @@ +obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o +obj-$(CONFIG_MACH_BERLIN_BG2) += bg2.o +obj-$(CONFIG_MACH_BERLIN_BG2CD) += bg2.o +obj-$(CONFIG_MACH_BERLIN_BG2Q) += bg2q.o diff --git a/drivers/clk/berlin/berlin2-avpll.c b/drivers/clk/berlin/berlin2-avpll.c new file mode 100644 index 000000000000..fd0f26c38465 --- /dev/null +++ b/drivers/clk/berlin/berlin2-avpll.c @@ -0,0 +1,393 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include "berlin2-avpll.h" + +/* + * Berlin2 SoCs comprise up to two PLLs called AVPLL built upon a + * VCO with 8 channels each, channel 8 is the odd-one-out and does + * not provide mul/div. + * + * Unfortunately, its registers are not named but just numbered. To + * get in at least some kind of structure, we split each AVPLL into + * the VCOs and each channel into separate clock drivers. + * + * Also, here and there the VCO registers are a bit different with + * respect to bit shifts. Make sure to add a comment for those. + */ +#define NUM_CHANNELS 8 + +#define AVPLL_CTRL(x) ((x) * 0x4) + +#define VCO_CTRL0 AVPLL_CTRL(0) +/* BG2/BG2CDs VCO_B has an additional shift of 4 for its VCO_CTRL0 reg */ +#define VCO_RESET BIT(0) +#define VCO_POWERUP BIT(1) +#define VCO_INTERPOL_SHIFT 2 +#define VCO_INTERPOL_MASK (0xf << VCO_INTERPOL_SHIFT) +#define VCO_REG1V45_SEL_SHIFT 6 +#define VCO_REG1V45_SEL(x) ((x) << VCO_REG1V45_SEL_SHIFT) +#define VCO_REG1V45_SEL_1V40 VCO_REG1V45_SEL(0) +#define VCO_REG1V45_SEL_1V45 VCO_REG1V45_SEL(1) +#define VCO_REG1V45_SEL_1V50 VCO_REG1V45_SEL(2) +#define VCO_REG1V45_SEL_1V55 VCO_REG1V45_SEL(3) +#define VCO_REG1V45_SEL_MASK VCO_REG1V45_SEL(3) +#define VCO_REG0V9_SEL_SHIFT 8 +#define VCO_REG0V9_SEL_MASK (0xf << VCO_REG0V9_SEL_SHIFT) +#define VCO_VTHCAL_SHIFT 12 +#define VCO_VTHCAL(x) ((x) << VCO_VTHCAL_SHIFT) +#define VCO_VTHCAL_0V90 VCO_VTHCAL(0) +#define VCO_VTHCAL_0V95 VCO_VTHCAL(1) +#define VCO_VTHCAL_1V00 VCO_VTHCAL(2) +#define VCO_VTHCAL_1V05 VCO_VTHCAL(3) +#define VCO_VTHCAL_MASK VCO_VTHCAL(3) +#define VCO_KVCOEXT_SHIFT 14 +#define VCO_KVCOEXT_MASK (0x3 << VCO_KVCOEXT_SHIFT) +#define VCO_KVCOEXT_ENABLE BIT(17) +#define VCO_V2IEXT_SHIFT 18 +#define VCO_V2IEXT_MASK (0xf << VCO_V2IEXT_SHIFT) +#define VCO_V2IEXT_ENABLE BIT(22) +#define VCO_SPEED_SHIFT 23 +#define VCO_SPEED(x) ((x) << VCO_SPEED_SHIFT) +#define VCO_SPEED_1G08_1G21 VCO_SPEED(0) +#define VCO_SPEED_1G21_1G40 VCO_SPEED(1) +#define VCO_SPEED_1G40_1G61 VCO_SPEED(2) +#define VCO_SPEED_1G61_1G86 VCO_SPEED(3) +#define VCO_SPEED_1G86_2G00 VCO_SPEED(4) +#define VCO_SPEED_2G00_2G22 VCO_SPEED(5) +#define VCO_SPEED_2G22 VCO_SPEED(6) +#define VCO_SPEED_MASK VCO_SPEED(0x7) +#define VCO_CLKDET_ENABLE BIT(26) +#define VCO_CTRL1 AVPLL_CTRL(1) +#define VCO_REFDIV_SHIFT 0 +#define VCO_REFDIV(x) ((x) << VCO_REFDIV_SHIFT) +#define VCO_REFDIV_1 VCO_REFDIV(0) +#define VCO_REFDIV_2 VCO_REFDIV(1) +#define VCO_REFDIV_4 VCO_REFDIV(2) +#define VCO_REFDIV_3 VCO_REFDIV(3) +#define VCO_REFDIV_MASK VCO_REFDIV(0x3f) +#define VCO_FBDIV_SHIFT 6 +#define VCO_FBDIV(x) ((x) << VCO_FBDIV_SHIFT) +#define VCO_FBDIV_MASK VCO_FBDIV(0xff) +#define VCO_ICP_SHIFT 14 +/* PLL Charge Pump Current = 10uA * (x + 1) */ +#define VCO_ICP(x) ((x) << VCO_ICP_SHIFT) +#define VCO_ICP_MASK VCO_ICP(0xf) +#define VCO_LOAD_CAP BIT(18) +#define VCO_CALIBRATION_START BIT(19) +#define VCO_FREQOFFSETn(x) AVPLL_CTRL(3 + (x)) +#define VCO_FREQOFFSET_MASK 0x7ffff +#define VCO_CTRL10 AVPLL_CTRL(10) +#define VCO_POWERUP_CH1 BIT(20) +#define VCO_CTRL11 AVPLL_CTRL(11) +#define VCO_CTRL12 AVPLL_CTRL(12) +#define VCO_CTRL13 AVPLL_CTRL(13) +#define VCO_CTRL14 AVPLL_CTRL(14) +#define VCO_CTRL15 AVPLL_CTRL(15) +#define VCO_SYNC1n(x) AVPLL_CTRL(15 + (x)) +#define VCO_SYNC1_MASK 0x1ffff +#define VCO_SYNC2n(x) AVPLL_CTRL(23 + (x)) +#define VCO_SYNC2_MASK 0x1ffff +#define VCO_CTRL30 AVPLL_CTRL(30) +#define VCO_DPLL_CH1_ENABLE BIT(17) + +struct berlin2_avpll_vco { + struct clk_hw hw; + void __iomem *base; + u8 flags; +}; + +#define to_avpll_vco(hw) container_of(hw, struct berlin2_avpll_vco, hw) + +static int berlin2_avpll_vco_is_enabled(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg >>= 4; + + return !!(reg & VCO_POWERUP); +} + +static int berlin2_avpll_vco_enable(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg |= VCO_POWERUP << 4; + else + reg |= VCO_POWERUP; + writel_relaxed(reg, vco->base + VCO_CTRL0); + + return 0; +} + +static void berlin2_avpll_vco_disable(struct clk_hw *hw) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg; + + reg = readl_relaxed(vco->base + VCO_CTRL0); + if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK) + reg &= ~(VCO_POWERUP << 4); + else + reg &= ~VCO_POWERUP; + writel_relaxed(reg, vco->base + VCO_CTRL0); +} + +static u8 vco_refdiv[] = { 1, 2, 4, 3 }; + +static unsigned long +berlin2_avpll_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct berlin2_avpll_vco *vco = to_avpll_vco(hw); + u32 reg, refdiv, fbdiv; + u64 freq = parent_rate; + + /* AVPLL VCO frequency: Fvco = (Fref / refdiv) * fbdiv */ + reg = readl_relaxed(vco->base + VCO_CTRL1); + refdiv = (reg & VCO_REFDIV_MASK) >> VCO_REFDIV_SHIFT; + refdiv = vco_refdiv[refdiv]; + fbdiv = (reg & VCO_FBDIV_MASK) >> VCO_FBDIV_SHIFT; + freq *= fbdiv; + do_div(freq, refdiv); + + return (unsigned long)freq; +} + +static const struct clk_ops berlin2_avpll_vco_ops = { + .is_enabled = berlin2_avpll_vco_is_enabled, + .enable = berlin2_avpll_vco_enable, + .disable = berlin2_avpll_vco_disable, + .recalc_rate = berlin2_avpll_vco_recalc_rate, +}; + +struct clk * __init berlin2_avpll_vco_register(void __iomem *base, + const char *name, const char *parent_name, + u8 vco_flags, unsigned long flags) +{ + struct berlin2_avpll_vco *vco; + struct clk_init_data init; + + vco = kzalloc(sizeof(*vco), GFP_KERNEL); + if (!vco) + return ERR_PTR(-ENOMEM); + + vco->base = base; + vco->flags = vco_flags; + vco->hw.init = &init; + init.name = name; + init.ops = &berlin2_avpll_vco_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = flags; + + return clk_register(NULL, &vco->hw); +} + +struct berlin2_avpll_channel { + struct clk_hw hw; + void __iomem *base; + u8 flags; + u8 index; +}; + +#define to_avpll_channel(hw) container_of(hw, struct berlin2_avpll_channel, hw) + +static int berlin2_avpll_channel_is_enabled(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + if (ch->index == 7) + return 1; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg &= VCO_POWERUP_CH1 << ch->index; + + return !!reg; +} + +static int berlin2_avpll_channel_enable(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg |= VCO_POWERUP_CH1 << ch->index; + writel_relaxed(reg, ch->base + VCO_CTRL10); + + return 0; +} + +static void berlin2_avpll_channel_disable(struct clk_hw *hw) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg; + + reg = readl_relaxed(ch->base + VCO_CTRL10); + reg &= ~(VCO_POWERUP_CH1 << ch->index); + writel_relaxed(reg, ch->base + VCO_CTRL10); +} + +static const u8 div_hdmi[] = { 1, 2, 4, 6 }; +static const u8 div_av1[] = { 1, 2, 5, 5 }; + +static unsigned long +berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct berlin2_avpll_channel *ch = to_avpll_channel(hw); + u32 reg, div_av2, div_av3, divider = 1; + u64 freq = parent_rate; + + reg = readl_relaxed(ch->base + VCO_CTRL30); + if ((reg & (VCO_DPLL_CH1_ENABLE << ch->index)) == 0) + goto skip_div; + + /* + * Fch = (Fref * sync2) / + * (sync1 * div_hdmi * div_av1 * div_av2 * div_av3) + */ + + reg = readl_relaxed(ch->base + VCO_SYNC1n(ch->index)); + /* BG2/BG2CDs SYNC1 reg on AVPLL_B channel 1 is shifted by 4 */ + if (ch->flags & BERLIN2_AVPLL_BIT_QUIRK && ch->index == 0) + reg >>= 4; + divider = reg & VCO_SYNC1_MASK; + + reg = readl_relaxed(ch->base + VCO_SYNC2n(ch->index)); + freq *= reg & VCO_SYNC2_MASK; + + /* Channel 8 has no dividers */ + if (ch->index == 7) + goto skip_div; + + /* + * HDMI divider start at VCO_CTRL11, bit 7; MSB is enable, lower 2 bit + * determine divider. + */ + reg = readl_relaxed(ch->base + VCO_CTRL11) >> 7; + reg = (reg >> (ch->index * 3)); + if (reg & BIT(2)) + divider *= div_hdmi[reg & 0x3]; + + /* + * AV1 divider start at VCO_CTRL11, bit 28; MSB is enable, lower 2 bit + * determine divider. + */ + if (ch->index == 0) { + reg = readl_relaxed(ch->base + VCO_CTRL11); + reg >>= 28; + } else { + reg = readl_relaxed(ch->base + VCO_CTRL12); + reg >>= (ch->index-1) * 3; + } + if (reg & BIT(2)) + divider *= div_av1[reg & 0x3]; + + /* + * AV2 divider start at VCO_CTRL12, bit 18; each 7 bits wide, + * zero is not a valid value. + */ + if (ch->index < 2) { + reg = readl_relaxed(ch->base + VCO_CTRL12); + reg >>= 18 + (ch->index * 7); + } else if (ch->index < 7) { + reg = readl_relaxed(ch->base + VCO_CTRL13); + reg >>= (ch->index - 2) * 7; + } else { + reg = readl_relaxed(ch->base + VCO_CTRL14); + } + div_av2 = reg & 0x7f; + if (div_av2) + divider *= div_av2; + + /* + * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide. + * AV2/AV3 form a fractional divider, where only specfic values for AV3 + * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass. + */ + if (ch->index < 6) { + reg = readl_relaxed(ch->base + VCO_CTRL14); + reg >>= 7 + (ch->index * 4); + } else { + reg = readl_relaxed(ch->base + VCO_CTRL15); + } + div_av3 = reg & 0xf; + if (div_av2 && div_av3) + freq *= 2; + +skip_div: + do_div(freq, divider); + return (unsigned long)freq; +} + +static const struct clk_ops berlin2_avpll_channel_ops = { + .is_enabled = berlin2_avpll_channel_is_enabled, + .enable = berlin2_avpll_channel_enable, + .disable = berlin2_avpll_channel_disable, + .recalc_rate = berlin2_avpll_channel_recalc_rate, +}; + +/* + * Another nice quirk: + * On some production SoCs, AVPLL channels are scrambled with respect + * to the channel numbering in the registers but still referenced by + * their original channel numbers. We deal with it by having a flag + * and a translation table for the index. + */ +static const u8 quirk_index[] __initconst = { 0, 6, 5, 4, 3, 2, 1, 7 }; + +struct clk * __init berlin2_avpll_channel_register(void __iomem *base, + const char *name, u8 index, const char *parent_name, + u8 ch_flags, unsigned long flags) +{ + struct berlin2_avpll_channel *ch; + struct clk_init_data init; + + ch = kzalloc(sizeof(*ch), GFP_KERNEL); + if (!ch) + return ERR_PTR(-ENOMEM); + + ch->base = base; + if (ch_flags & BERLIN2_AVPLL_SCRAMBLE_QUIRK) + ch->index = quirk_index[index]; + else + ch->index = index; + + ch->flags = ch_flags; + ch->hw.init = &init; + init.name = name; + init.ops = &berlin2_avpll_channel_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = flags; + + return clk_register(NULL, &ch->hw); +} diff --git a/drivers/clk/berlin/berlin2-avpll.h b/drivers/clk/berlin/berlin2-avpll.h new file mode 100644 index 000000000000..a37f5068d299 --- /dev/null +++ b/drivers/clk/berlin/berlin2-avpll.h @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __BERLIN2_AVPLL_H +#define __BERLIN2_AVPLL_H + +struct clk; + +#define BERLIN2_AVPLL_BIT_QUIRK BIT(0) +#define BERLIN2_AVPLL_SCRAMBLE_QUIRK BIT(1) + +struct clk * __init +berlin2_avpll_vco_register(void __iomem *base, const char *name, + const char *parent_name, u8 vco_flags, unsigned long flags); + +struct clk * __init +berlin2_avpll_channel_register(void __iomem *base, const char *name, + u8 index, const char *parent_name, u8 ch_flags, + unsigned long flags); + +#endif /* __BERLIN2_AVPLL_H */ diff --git a/drivers/clk/berlin/berlin2-div.c b/drivers/clk/berlin/berlin2-div.c new file mode 100644 index 000000000000..81ff97f8aa0b --- /dev/null +++ b/drivers/clk/berlin/berlin2-div.c @@ -0,0 +1,265 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include "berlin2-div.h" + +/* + * Clock dividers in Berlin2 SoCs comprise a complex cell to select + * input pll and divider. The virtual structure as it is used in Marvell + * BSP code can be seen as: + * + * +---+ + * pll0 --------------->| 0 | +---+ + * +---+ |(B)|--+--------------->| 0 | +---+ + * pll1.0 -->| 0 | +-->| 1 | | +--------+ |(E)|----->| 0 | +---+ + * pll1.1 -->| 1 | | +---+ +-->|(C) 1:M |-->| 1 | |(F)|-->|(G)|-> + * ... -->|(A)|--+ | +--------+ +---+ +-->| 1 | +---+ + * ... -->| | +-->|(D) 1:3 |----------+ +---+ + * pll1.N -->| N | +--------- + * +---+ + * + * (A) input pll clock mux controlled by <PllSelect[1:n]> + * (B) input pll bypass mux controlled by <PllSwitch> + * (C) programmable clock divider controlled by <Select[1:n]> + * (D) constant div-by-3 clock divider + * (E) programmable clock divider bypass controlled by <Switch> + * (F) constant div-by-3 clock mux controlled by <D3Switch> + * (G) clock gate controlled by <Enable> + * + * For whatever reason, above control signals come in two flavors: + * - single register dividers with all bits in one register + * - shared register dividers with bits spread over multiple registers + * (including signals for the same cell spread over consecutive registers) + * + * Also, clock gate and pll mux is not available on every div cell, so + * we have to deal with those, too. We reuse common clock composite driver + * for it. + */ + +#define PLL_SELECT_MASK 0x7 +#define DIV_SELECT_MASK 0x7 + +struct berlin2_div { + struct clk_hw hw; + void __iomem *base; + struct berlin2_div_map map; + spinlock_t *lock; +}; + +#define to_berlin2_div(hw) container_of(hw, struct berlin2_div, hw) + +static u8 clk_div[] = { 1, 2, 4, 6, 8, 12, 1, 1 }; + +static int berlin2_div_is_enabled(struct clk_hw *hw) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 reg; + + if (div->lock) + spin_lock(div->lock); + + reg = readl_relaxed(div->base + map->gate_offs); + reg >>= map->gate_shift; + + if (div->lock) + spin_unlock(div->lock); + + return (reg & 0x1); +} + +static int berlin2_div_enable(struct clk_hw *hw) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 reg; + + if (div->lock) + spin_lock(div->lock); + + reg = readl_relaxed(div->base + map->gate_offs); + reg |= BIT(map->gate_shift); + writel_relaxed(reg, div->base + map->gate_offs); + + if (div->lock) + spin_unlock(div->lock); + + return 0; +} + +static void berlin2_div_disable(struct clk_hw *hw) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 reg; + + if (div->lock) + spin_lock(div->lock); + + reg = readl_relaxed(div->base + map->gate_offs); + reg &= ~BIT(map->gate_shift); + writel_relaxed(reg, div->base + map->gate_offs); + + if (div->lock) + spin_unlock(div->lock); +} + +static int berlin2_div_set_parent(struct clk_hw *hw, u8 index) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 reg; + + if (div->lock) + spin_lock(div->lock); + + /* index == 0 is PLL_SWITCH */ + reg = readl_relaxed(div->base + map->pll_switch_offs); + if (index == 0) + reg &= ~BIT(map->pll_switch_shift); + else + reg |= BIT(map->pll_switch_shift); + writel_relaxed(reg, div->base + map->pll_switch_offs); + + /* index > 0 is PLL_SELECT */ + if (index > 0) { + reg = readl_relaxed(div->base + map->pll_select_offs); + reg &= ~(PLL_SELECT_MASK << map->pll_select_shift); + reg |= (index - 1) << map->pll_select_shift; + writel_relaxed(reg, div->base + map->pll_select_offs); + } + + if (div->lock) + spin_unlock(div->lock); + + return 0; +} + +static u8 berlin2_div_get_parent(struct clk_hw *hw) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 reg; + u8 index = 0; + + if (div->lock) + spin_lock(div->lock); + + /* PLL_SWITCH == 0 is index 0 */ + reg = readl_relaxed(div->base + map->pll_switch_offs); + reg &= BIT(map->pll_switch_shift); + if (reg) { + reg = readl_relaxed(div->base + map->pll_select_offs); + reg >>= map->pll_select_shift; + reg &= PLL_SELECT_MASK; + index = 1 + reg; + } + + if (div->lock) + spin_unlock(div->lock); + + return index; +} + +static unsigned long berlin2_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct berlin2_div *div = to_berlin2_div(hw); + struct berlin2_div_map *map = &div->map; + u32 divsw, div3sw, divider = 1; + + if (div->lock) + spin_lock(div->lock); + + divsw = readl_relaxed(div->base + map->div_switch_offs) & + (1 << map->div_switch_shift); + div3sw = readl_relaxed(div->base + map->div3_switch_offs) & + (1 << map->div3_switch_shift); + + /* constant divide-by-3 (dominant) */ + if (div3sw != 0) { + divider = 3; + /* divider can be bypassed with DIV_SWITCH == 0 */ + } else if (divsw == 0) { + divider = 1; + /* clock divider determined by DIV_SELECT */ + } else { + u32 reg; + reg = readl_relaxed(div->base + map->div_select_offs); + reg >>= map->div_select_shift; + reg &= DIV_SELECT_MASK; + divider = clk_div[reg]; + } + + if (div->lock) + spin_unlock(div->lock); + + return parent_rate / divider; +} + +static const struct clk_ops berlin2_div_rate_ops = { + .recalc_rate = berlin2_div_recalc_rate, +}; + +static const struct clk_ops berlin2_div_gate_ops = { + .is_enabled = berlin2_div_is_enabled, + .enable = berlin2_div_enable, + .disable = berlin2_div_disable, +}; + +static const struct clk_ops berlin2_div_mux_ops = { + .set_parent = berlin2_div_set_parent, + .get_parent = berlin2_div_get_parent, +}; + +struct clk * __init +berlin2_div_register(const struct berlin2_div_map *map, + void __iomem *base, const char *name, u8 div_flags, + const char **parent_names, int num_parents, + unsigned long flags, spinlock_t *lock) +{ + const struct clk_ops *mux_ops = &berlin2_div_mux_ops; + const struct clk_ops *rate_ops = &berlin2_div_rate_ops; + const struct clk_ops *gate_ops = &berlin2_div_gate_ops; + struct berlin2_div *div; + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + /* copy div_map to allow __initconst */ + memcpy(&div->map, map, sizeof(*map)); + div->base = base; + div->lock = lock; + + if ((div_flags & BERLIN2_DIV_HAS_GATE) == 0) + gate_ops = NULL; + if ((div_flags & BERLIN2_DIV_HAS_MUX) == 0) + mux_ops = NULL; + + return clk_register_composite(NULL, name, parent_names, num_parents, + &div->hw, mux_ops, &div->hw, rate_ops, + &div->hw, gate_ops, flags); +} diff --git a/drivers/clk/berlin/berlin2-div.h b/drivers/clk/berlin/berlin2-div.h new file mode 100644 index 000000000000..15e3384f3116 --- /dev/null +++ b/drivers/clk/berlin/berlin2-div.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __BERLIN2_DIV_H +#define __BERLIN2_DIV_H + +struct clk; + +#define BERLIN2_DIV_HAS_GATE BIT(0) +#define BERLIN2_DIV_HAS_MUX BIT(1) + +#define BERLIN2_PLL_SELECT(_off, _sh) \ + .pll_select_offs = _off, \ + .pll_select_shift = _sh + +#define BERLIN2_PLL_SWITCH(_off, _sh) \ + .pll_switch_offs = _off, \ + .pll_switch_shift = _sh + +#define BERLIN2_DIV_SELECT(_off, _sh) \ + .div_select_offs = _off, \ + .div_select_shift = _sh + +#define BERLIN2_DIV_SWITCH(_off, _sh) \ + .div_switch_offs = _off, \ + .div_switch_shift = _sh + +#define BERLIN2_DIV_D3SWITCH(_off, _sh) \ + .div3_switch_offs = _off, \ + .div3_switch_shift = _sh + +#define BERLIN2_DIV_GATE(_off, _sh) \ + .gate_offs = _off, \ + .gate_shift = _sh + +#define BERLIN2_SINGLE_DIV(_off) \ + BERLIN2_DIV_GATE(_off, 0), \ + BERLIN2_PLL_SELECT(_off, 1), \ + BERLIN2_PLL_SWITCH(_off, 4), \ + BERLIN2_DIV_SWITCH(_off, 5), \ + BERLIN2_DIV_D3SWITCH(_off, 6), \ + BERLIN2_DIV_SELECT(_off, 7) + +struct berlin2_div_map { + u16 pll_select_offs; + u16 pll_switch_offs; + u16 div_select_offs; + u16 div_switch_offs; + u16 div3_switch_offs; + u16 gate_offs; + u8 pll_select_shift; + u8 pll_switch_shift; + u8 div_select_shift; + u8 div_switch_shift; + u8 div3_switch_shift; + u8 gate_shift; +}; + +struct berlin2_div_data { + const char *name; + const u8 *parent_ids; + int num_parents; + unsigned long flags; + struct berlin2_div_map map; + u8 div_flags; +}; + +struct clk * __init +berlin2_div_register(const struct berlin2_div_map *map, + void __iomem *base, const char *name, u8 div_flags, + const char **parent_names, int num_parents, + unsigned long flags, spinlock_t *lock); + +#endif /* __BERLIN2_DIV_H */ diff --git a/drivers/clk/berlin/berlin2-pll.c b/drivers/clk/berlin/berlin2-pll.c new file mode 100644 index 000000000000..bdc506b03824 --- /dev/null +++ b/drivers/clk/berlin/berlin2-pll.c @@ -0,0 +1,117 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <asm/div64.h> + +#include "berlin2-div.h" + +struct berlin2_pll_map { + const u8 vcodiv[16]; + u8 mult; + u8 fbdiv_shift; + u8 rfdiv_shift; + u8 divsel_shift; +}; + +struct berlin2_pll { + struct clk_hw hw; + void __iomem *base; + struct berlin2_pll_map map; +}; + +#define to_berlin2_pll(hw) container_of(hw, struct berlin2_pll, hw) + +#define SPLL_CTRL0 0x00 +#define SPLL_CTRL1 0x04 +#define SPLL_CTRL2 0x08 +#define SPLL_CTRL3 0x0c +#define SPLL_CTRL4 0x10 + +#define FBDIV_MASK 0x1ff +#define RFDIV_MASK 0x1f +#define DIVSEL_MASK 0xf + +/* + * The output frequency formula for the pll is: + * clkout = fbdiv / refdiv * parent / vcodiv + */ +static unsigned long +berlin2_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct berlin2_pll *pll = to_berlin2_pll(hw); + struct berlin2_pll_map *map = &pll->map; + u32 val, fbdiv, rfdiv, vcodivsel, vcodiv; + u64 rate = parent_rate; + + val = readl_relaxed(pll->base + SPLL_CTRL0); + fbdiv = (val >> map->fbdiv_shift) & FBDIV_MASK; + rfdiv = (val >> map->rfdiv_shift) & RFDIV_MASK; + if (rfdiv == 0) { + pr_warn("%s has zero rfdiv\n", __clk_get_name(hw->clk)); + rfdiv = 1; + } + + val = readl_relaxed(pll->base + SPLL_CTRL1); + vcodivsel = (val >> map->divsel_shift) & DIVSEL_MASK; + vcodiv = map->vcodiv[vcodivsel]; + if (vcodiv == 0) { + pr_warn("%s has zero vcodiv (index %d)\n", + __clk_get_name(hw->clk), vcodivsel); + vcodiv = 1; + } + + rate *= fbdiv * map->mult; + do_div(rate, rfdiv * vcodiv); + + return (unsigned long)rate; +} + +static const struct clk_ops berlin2_pll_ops = { + .recalc_rate = berlin2_pll_recalc_rate, +}; + +struct clk * __init +berlin2_pll_register(const struct berlin2_pll_map *map, + void __iomem *base, const char *name, + const char *parent_name, unsigned long flags) +{ + struct clk_init_data init; + struct berlin2_pll *pll; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + /* copy pll_map to allow __initconst */ + memcpy(&pll->map, map, sizeof(*map)); + pll->base = base; + pll->hw.init = &init; + init.name = name; + init.ops = &berlin2_pll_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = flags; + + return clk_register(NULL, &pll->hw); +} diff --git a/drivers/clk/berlin/berlin2-pll.h b/drivers/clk/berlin/berlin2-pll.h new file mode 100644 index 000000000000..8831ce27ac1e --- /dev/null +++ b/drivers/clk/berlin/berlin2-pll.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __BERLIN2_PLL_H +#define __BERLIN2_PLL_H + +struct clk; + +struct berlin2_pll_map { + const u8 vcodiv[16]; + u8 mult; + u8 fbdiv_shift; + u8 rfdiv_shift; + u8 divsel_shift; +}; + +struct clk * __init +berlin2_pll_register(const struct berlin2_pll_map *map, + void __iomem *base, const char *name, + const char *parent_name, unsigned long flags); + +#endif /* __BERLIN2_PLL_H */ diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c new file mode 100644 index 000000000000..515fb133495c --- /dev/null +++ b/drivers/clk/berlin/bg2.c @@ -0,0 +1,691 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/berlin2.h> + +#include "berlin2-avpll.h" +#include "berlin2-div.h" +#include "berlin2-pll.h" +#include "common.h" + +#define REG_PINMUX0 0x0000 +#define REG_PINMUX1 0x0004 +#define REG_SYSPLLCTL0 0x0014 +#define REG_SYSPLLCTL4 0x0024 +#define REG_MEMPLLCTL0 0x0028 +#define REG_MEMPLLCTL4 0x0038 +#define REG_CPUPLLCTL0 0x003c +#define REG_CPUPLLCTL4 0x004c +#define REG_AVPLLCTL0 0x0050 +#define REG_AVPLLCTL31 0x00cc +#define REG_AVPLLCTL62 0x0148 +#define REG_PLLSTATUS 0x014c +#define REG_CLKENABLE 0x0150 +#define REG_CLKSELECT0 0x0154 +#define REG_CLKSELECT1 0x0158 +#define REG_CLKSELECT2 0x015c +#define REG_CLKSELECT3 0x0160 +#define REG_CLKSWITCH0 0x0164 +#define REG_CLKSWITCH1 0x0168 +#define REG_RESET_TRIGGER 0x0178 +#define REG_RESET_STATUS0 0x017c +#define REG_RESET_STATUS1 0x0180 +#define REG_SW_GENERIC0 0x0184 +#define REG_SW_GENERIC3 0x0190 +#define REG_PRODUCTID 0x01cc +#define REG_PRODUCTID_EXT 0x01d0 +#define REG_GFX3DCORE_CLKCTL 0x022c +#define REG_GFX3DSYS_CLKCTL 0x0230 +#define REG_ARC_CLKCTL 0x0234 +#define REG_VIP_CLKCTL 0x0238 +#define REG_SDIO0XIN_CLKCTL 0x023c +#define REG_SDIO1XIN_CLKCTL 0x0240 +#define REG_GFX3DEXTRA_CLKCTL 0x0244 +#define REG_GFX3D_RESET 0x0248 +#define REG_GC360_CLKCTL 0x024c +#define REG_SDIO_DLLMST_CLKCTL 0x0250 + +/* + * BG2/BG2CD SoCs have the following audio/video I/O units: + * + * audiohd: HDMI TX audio + * audio0: 7.1ch TX + * audio1: 2ch TX + * audio2: 2ch RX + * audio3: SPDIF TX + * video0: HDMI video + * video1: Secondary video + * video2: SD auxiliary video + * + * There are no external audio clocks (ACLKI0, ACLKI1) and + * only one external video clock (VCLKI0). + * + * Currently missing bits and pieces: + * - audio_fast_pll is unknown + * - audiohd_pll is unknown + * - video0_pll is unknown + * - audio[023], audiohd parent pll is assumed to be audio_fast_pll + * + */ + +#define MAX_CLKS 41 +static struct clk *clks[MAX_CLKS]; +static struct clk_onecell_data clk_data; +static DEFINE_SPINLOCK(lock); +static void __iomem *gbase; + +enum { + REFCLK, VIDEO_EXT0, + SYSPLL, MEMPLL, CPUPLL, + AVPLL_A1, AVPLL_A2, AVPLL_A3, AVPLL_A4, + AVPLL_A5, AVPLL_A6, AVPLL_A7, AVPLL_A8, + AVPLL_B1, AVPLL_B2, AVPLL_B3, AVPLL_B4, + AVPLL_B5, AVPLL_B6, AVPLL_B7, AVPLL_B8, + AUDIO1_PLL, AUDIO_FAST_PLL, + VIDEO0_PLL, VIDEO0_IN, + VIDEO1_PLL, VIDEO1_IN, + VIDEO2_PLL, VIDEO2_IN, +}; + +static const char *clk_names[] = { + [REFCLK] = "refclk", + [VIDEO_EXT0] = "video_ext0", + [SYSPLL] = "syspll", + [MEMPLL] = "mempll", + [CPUPLL] = "cpupll", + [AVPLL_A1] = "avpll_a1", + [AVPLL_A2] = "avpll_a2", + [AVPLL_A3] = "avpll_a3", + [AVPLL_A4] = "avpll_a4", + [AVPLL_A5] = "avpll_a5", + [AVPLL_A6] = "avpll_a6", + [AVPLL_A7] = "avpll_a7", + [AVPLL_A8] = "avpll_a8", + [AVPLL_B1] = "avpll_b1", + [AVPLL_B2] = "avpll_b2", + [AVPLL_B3] = "avpll_b3", + [AVPLL_B4] = "avpll_b4", + [AVPLL_B5] = "avpll_b5", + [AVPLL_B6] = "avpll_b6", + [AVPLL_B7] = "avpll_b7", + [AVPLL_B8] = "avpll_b8", + [AUDIO1_PLL] = "audio1_pll", + [AUDIO_FAST_PLL] = "audio_fast_pll", + [VIDEO0_PLL] = "video0_pll", + [VIDEO0_IN] = "video0_in", + [VIDEO1_PLL] = "video1_pll", + [VIDEO1_IN] = "video1_in", + [VIDEO2_PLL] = "video2_pll", + [VIDEO2_IN] = "video2_in", +}; + +static const struct berlin2_pll_map bg2_pll_map __initconst = { + .vcodiv = {10, 15, 20, 25, 30, 40, 50, 60, 80}, + .mult = 10, + .fbdiv_shift = 6, + .rfdiv_shift = 1, + .divsel_shift = 7, +}; + +static const u8 default_parent_ids[] = { + SYSPLL, AVPLL_B4, AVPLL_A5, AVPLL_B6, AVPLL_B7, SYSPLL +}; + +static const struct berlin2_div_data bg2_divs[] __initconst = { + { + .name = "sys", + .parent_ids = (const u8 []){ + SYSPLL, AVPLL_B4, AVPLL_B5, AVPLL_B6, AVPLL_B7, SYSPLL + }, + .num_parents = 6, + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 0), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 0), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 3), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 3), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 4), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 5), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = CLK_IGNORE_UNUSED, + }, + { + .name = "cpu", + .parent_ids = (const u8 []){ + CPUPLL, MEMPLL, MEMPLL, MEMPLL, MEMPLL + }, + .num_parents = 5, + .map = { + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 6), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 9), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 6), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 7), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 8), + }, + .div_flags = BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "drmfigo", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 16), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 17), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 20), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 12), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 13), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 14), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "cfg", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 1), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 23), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 26), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 15), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 16), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 17), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "gfx", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 4), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 29), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 0), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 18), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 19), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 20), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "zsp", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 5), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 3), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 6), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 21), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 22), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 23), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "perif", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 6), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 9), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 12), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 24), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 25), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 26), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = CLK_IGNORE_UNUSED, + }, + { + .name = "pcube", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 2), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 15), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 18), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 27), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 28), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 29), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "vscope", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 3), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 21), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 24), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 30), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 31), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 0), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "nfc_ecc", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 18), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 27), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 0), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 1), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 2), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 3), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "vpp", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 21), + BERLIN2_PLL_SELECT(REG_CLKSELECT2, 3), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 6), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 4), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 5), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 6), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "app", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 20), + BERLIN2_PLL_SELECT(REG_CLKSELECT2, 9), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 12), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 7), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 8), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 9), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "audio0", + .parent_ids = (const u8 []){ AUDIO_FAST_PLL }, + .num_parents = 1, + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 22), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 17), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 10), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 11), + }, + .div_flags = BERLIN2_DIV_HAS_GATE, + .flags = 0, + }, + { + .name = "audio2", + .parent_ids = (const u8 []){ AUDIO_FAST_PLL }, + .num_parents = 1, + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 24), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 20), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 14), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 15), + }, + .div_flags = BERLIN2_DIV_HAS_GATE, + .flags = 0, + }, + { + .name = "audio3", + .parent_ids = (const u8 []){ AUDIO_FAST_PLL }, + .num_parents = 1, + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 25), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 23), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 16), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 17), + }, + .div_flags = BERLIN2_DIV_HAS_GATE, + .flags = 0, + }, + { + .name = "audio1", + .parent_ids = (const u8 []){ AUDIO1_PLL }, + .num_parents = 1, + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 23), + BERLIN2_DIV_SELECT(REG_CLKSELECT3, 0), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 12), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 13), + }, + .div_flags = BERLIN2_DIV_HAS_GATE, + .flags = 0, + }, + { + .name = "gfx3d_core", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_GFX3DCORE_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "gfx3d_sys", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_GFX3DSYS_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "arc", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_ARC_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "vip", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_VIP_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "sdio0xin", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_SDIO0XIN_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "sdio1xin", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_SDIO1XIN_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "gfx3d_extra", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_GFX3DEXTRA_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "gc360", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_GC360_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "sdio_dllmst", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_SDIO_DLLMST_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, +}; + +static const struct berlin2_gate_data bg2_gates[] __initconst = { + { "geth0", "perif", 7 }, + { "geth1", "perif", 8 }, + { "sata", "perif", 9 }, + { "ahbapb", "perif", 10, CLK_IGNORE_UNUSED }, + { "usb0", "perif", 11 }, + { "usb1", "perif", 12 }, + { "pbridge", "perif", 13, CLK_IGNORE_UNUSED }, + { "sdio0", "perif", 14, CLK_IGNORE_UNUSED }, + { "sdio1", "perif", 15, CLK_IGNORE_UNUSED }, + { "nfc", "perif", 17 }, + { "smemc", "perif", 19 }, + { "audiohd", "audiohd_pll", 26 }, + { "video0", "video0_in", 27 }, + { "video1", "video1_in", 28 }, + { "video2", "video2_in", 29 }, +}; + +static void __init berlin2_clock_setup(struct device_node *np) +{ + const char *parent_names[9]; + struct clk *clk; + u8 avpll_flags = 0; + int n; + + gbase = of_iomap(np, 0); + if (!gbase) + return; + + /* overwrite default clock names with DT provided ones */ + clk = of_clk_get_by_name(np, clk_names[REFCLK]); + if (!IS_ERR(clk)) { + clk_names[REFCLK] = __clk_get_name(clk); + clk_put(clk); + } + + clk = of_clk_get_by_name(np, clk_names[VIDEO_EXT0]); + if (!IS_ERR(clk)) { + clk_names[VIDEO_EXT0] = __clk_get_name(clk); + clk_put(clk); + } + + /* simple register PLLs */ + clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_SYSPLLCTL0, + clk_names[SYSPLL], clk_names[REFCLK], 0); + if (IS_ERR(clk)) + goto bg2_fail; + + clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_MEMPLLCTL0, + clk_names[MEMPLL], clk_names[REFCLK], 0); + if (IS_ERR(clk)) + goto bg2_fail; + + clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_CPUPLLCTL0, + clk_names[CPUPLL], clk_names[REFCLK], 0); + if (IS_ERR(clk)) + goto bg2_fail; + + if (of_device_is_compatible(np, "marvell,berlin2-global-register")) + avpll_flags |= BERLIN2_AVPLL_SCRAMBLE_QUIRK; + + /* audio/video VCOs */ + clk = berlin2_avpll_vco_register(gbase + REG_AVPLLCTL0, "avpll_vcoA", + clk_names[REFCLK], avpll_flags, 0); + if (IS_ERR(clk)) + goto bg2_fail; + + for (n = 0; n < 8; n++) { + clk = berlin2_avpll_channel_register(gbase + REG_AVPLLCTL0, + clk_names[AVPLL_A1 + n], n, "avpll_vcoA", + avpll_flags, 0); + if (IS_ERR(clk)) + goto bg2_fail; + } + + clk = berlin2_avpll_vco_register(gbase + REG_AVPLLCTL31, "avpll_vcoB", + clk_names[REFCLK], BERLIN2_AVPLL_BIT_QUIRK | + avpll_flags, 0); + if (IS_ERR(clk)) + goto bg2_fail; + + for (n = 0; n < 8; n++) { + clk = berlin2_avpll_channel_register(gbase + REG_AVPLLCTL31, + clk_names[AVPLL_B1 + n], n, "avpll_vcoB", + BERLIN2_AVPLL_BIT_QUIRK | avpll_flags, 0); + if (IS_ERR(clk)) + goto bg2_fail; + } + + /* reference clock bypass switches */ + parent_names[0] = clk_names[SYSPLL]; + parent_names[1] = clk_names[REFCLK]; + clk = clk_register_mux(NULL, "syspll_byp", parent_names, 2, + 0, gbase + REG_CLKSWITCH0, 0, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + clk_names[SYSPLL] = __clk_get_name(clk); + + parent_names[0] = clk_names[MEMPLL]; + parent_names[1] = clk_names[REFCLK]; + clk = clk_register_mux(NULL, "mempll_byp", parent_names, 2, + 0, gbase + REG_CLKSWITCH0, 1, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + clk_names[MEMPLL] = __clk_get_name(clk); + + parent_names[0] = clk_names[CPUPLL]; + parent_names[1] = clk_names[REFCLK]; + clk = clk_register_mux(NULL, "cpupll_byp", parent_names, 2, + 0, gbase + REG_CLKSWITCH0, 2, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + clk_names[CPUPLL] = __clk_get_name(clk); + + /* clock muxes */ + parent_names[0] = clk_names[AVPLL_B3]; + parent_names[1] = clk_names[AVPLL_A3]; + clk = clk_register_mux(NULL, clk_names[AUDIO1_PLL], parent_names, 2, + 0, gbase + REG_CLKSELECT2, 29, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + parent_names[0] = clk_names[VIDEO0_PLL]; + parent_names[1] = clk_names[VIDEO_EXT0]; + clk = clk_register_mux(NULL, clk_names[VIDEO0_IN], parent_names, 2, + 0, gbase + REG_CLKSELECT3, 4, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + parent_names[0] = clk_names[VIDEO1_PLL]; + parent_names[1] = clk_names[VIDEO_EXT0]; + clk = clk_register_mux(NULL, clk_names[VIDEO1_IN], parent_names, 2, + 0, gbase + REG_CLKSELECT3, 6, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + parent_names[0] = clk_names[AVPLL_A2]; + parent_names[1] = clk_names[AVPLL_B2]; + clk = clk_register_mux(NULL, clk_names[VIDEO1_PLL], parent_names, 2, + 0, gbase + REG_CLKSELECT3, 7, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + parent_names[0] = clk_names[VIDEO2_PLL]; + parent_names[1] = clk_names[VIDEO_EXT0]; + clk = clk_register_mux(NULL, clk_names[VIDEO2_IN], parent_names, 2, + 0, gbase + REG_CLKSELECT3, 9, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + parent_names[0] = clk_names[AVPLL_B1]; + parent_names[1] = clk_names[AVPLL_A5]; + clk = clk_register_mux(NULL, clk_names[VIDEO2_PLL], parent_names, 2, + 0, gbase + REG_CLKSELECT3, 10, 1, 0, &lock); + if (IS_ERR(clk)) + goto bg2_fail; + + /* clock divider cells */ + for (n = 0; n < ARRAY_SIZE(bg2_divs); n++) { + const struct berlin2_div_data *dd = &bg2_divs[n]; + int k; + + for (k = 0; k < dd->num_parents; k++) + parent_names[k] = clk_names[dd->parent_ids[k]]; + + clks[CLKID_SYS + n] = berlin2_div_register(&dd->map, gbase, + dd->name, dd->div_flags, parent_names, + dd->num_parents, dd->flags, &lock); + } + + /* clock gate cells */ + for (n = 0; n < ARRAY_SIZE(bg2_gates); n++) { + const struct berlin2_gate_data *gd = &bg2_gates[n]; + + clks[CLKID_GETH0 + n] = clk_register_gate(NULL, gd->name, + gd->parent_name, gd->flags, gbase + REG_CLKENABLE, + gd->bit_idx, 0, &lock); + } + + /* twdclk is derived from cpu/3 */ + clks[CLKID_TWD] = + clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3); + + /* check for errors on leaf clocks */ + for (n = 0; n < MAX_CLKS; n++) { + if (!IS_ERR(clks[n])) + continue; + + pr_err("%s: Unable to register leaf clock %d\n", + np->full_name, n); + goto bg2_fail; + } + + /* register clk-provider */ + clk_data.clks = clks; + clk_data.clk_num = MAX_CLKS; + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + return; + +bg2_fail: + iounmap(gbase); +} +CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl", + berlin2_clock_setup); +CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl", + berlin2_clock_setup); diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c new file mode 100644 index 000000000000..21784e4eb3f0 --- /dev/null +++ b/drivers/clk/berlin/bg2q.c @@ -0,0 +1,389 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <dt-bindings/clock/berlin2q.h> + +#include "berlin2-div.h" +#include "berlin2-pll.h" +#include "common.h" + +#define REG_PINMUX0 0x0018 +#define REG_PINMUX5 0x002c +#define REG_SYSPLLCTL0 0x0030 +#define REG_SYSPLLCTL4 0x0040 +#define REG_CLKENABLE 0x00e8 +#define REG_CLKSELECT0 0x00ec +#define REG_CLKSELECT1 0x00f0 +#define REG_CLKSELECT2 0x00f4 +#define REG_CLKSWITCH0 0x00f8 +#define REG_CLKSWITCH1 0x00fc +#define REG_SW_GENERIC0 0x0110 +#define REG_SW_GENERIC3 0x011c +#define REG_SDIO0XIN_CLKCTL 0x0158 +#define REG_SDIO1XIN_CLKCTL 0x015c + +#define MAX_CLKS 27 +static struct clk *clks[MAX_CLKS]; +static struct clk_onecell_data clk_data; +static DEFINE_SPINLOCK(lock); +static void __iomem *gbase; +static void __iomem *cpupll_base; + +enum { + REFCLK, + SYSPLL, CPUPLL, + AVPLL_B1, AVPLL_B2, AVPLL_B3, AVPLL_B4, + AVPLL_B5, AVPLL_B6, AVPLL_B7, AVPLL_B8, +}; + +static const char *clk_names[] = { + [REFCLK] = "refclk", + [SYSPLL] = "syspll", + [CPUPLL] = "cpupll", + [AVPLL_B1] = "avpll_b1", + [AVPLL_B2] = "avpll_b2", + [AVPLL_B3] = "avpll_b3", + [AVPLL_B4] = "avpll_b4", + [AVPLL_B5] = "avpll_b5", + [AVPLL_B6] = "avpll_b6", + [AVPLL_B7] = "avpll_b7", + [AVPLL_B8] = "avpll_b8", +}; + +static const struct berlin2_pll_map bg2q_pll_map __initconst = { + .vcodiv = {1, 0, 2, 0, 3, 4, 0, 6, 8}, + .mult = 1, + .fbdiv_shift = 7, + .rfdiv_shift = 2, + .divsel_shift = 9, +}; + +static const u8 default_parent_ids[] = { + SYSPLL, AVPLL_B4, AVPLL_B5, AVPLL_B6, AVPLL_B7, SYSPLL +}; + +static const struct berlin2_div_data bg2q_divs[] __initconst = { + { + .name = "sys", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 0), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 0), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 3), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 3), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 4), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 5), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = CLK_IGNORE_UNUSED, + }, + { + .name = "drmfigo", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 17), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 6), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 9), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 6), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 7), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 8), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "cfg", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 1), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 12), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 15), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 9), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 10), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 11), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "gfx2d", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 4), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 18), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 21), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 12), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 13), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 14), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "zsp", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 6), + BERLIN2_PLL_SELECT(REG_CLKSELECT0, 24), + BERLIN2_DIV_SELECT(REG_CLKSELECT0, 27), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 15), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 16), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 17), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "perif", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 7), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 0), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 3), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 18), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 19), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 20), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = CLK_IGNORE_UNUSED, + }, + { + .name = "pcube", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 2), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 6), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 9), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 21), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 22), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 23), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "vscope", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 3), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 12), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 15), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 24), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 25), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 26), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "nfc_ecc", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 19), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 18), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 21), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 27), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 28), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 29), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "vpp", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 21), + BERLIN2_PLL_SELECT(REG_CLKSELECT1, 24), + BERLIN2_DIV_SELECT(REG_CLKSELECT1, 27), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 30), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 31), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 0), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "app", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_DIV_GATE(REG_CLKENABLE, 20), + BERLIN2_PLL_SELECT(REG_CLKSELECT2, 0), + BERLIN2_DIV_SELECT(REG_CLKSELECT2, 3), + BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 1), + BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 2), + BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 3), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "sdio0xin", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_SDIO0XIN_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, + { + .name = "sdio1xin", + .parent_ids = default_parent_ids, + .num_parents = ARRAY_SIZE(default_parent_ids), + .map = { + BERLIN2_SINGLE_DIV(REG_SDIO1XIN_CLKCTL), + }, + .div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX, + .flags = 0, + }, +}; + +static const struct berlin2_gate_data bg2q_gates[] __initconst = { + { "gfx2daxi", "perif", 5 }, + { "geth0", "perif", 8 }, + { "sata", "perif", 9 }, + { "ahbapb", "perif", 10, CLK_IGNORE_UNUSED }, + { "usb0", "perif", 11 }, + { "usb1", "perif", 12 }, + { "usb2", "perif", 13 }, + { "usb3", "perif", 14 }, + { "pbridge", "perif", 15, CLK_IGNORE_UNUSED }, + { "sdio", "perif", 16, CLK_IGNORE_UNUSED }, + { "nfc", "perif", 18 }, + { "smemc", "perif", 19 }, + { "pcie", "perif", 22 }, +}; + +static void __init berlin2q_clock_setup(struct device_node *np) +{ + const char *parent_names[9]; + struct clk *clk; + int n; + + gbase = of_iomap(np, 0); + if (!gbase) { + pr_err("%s: Unable to map global base\n", np->full_name); + return; + } + + /* BG2Q CPU PLL is not part of global registers */ + cpupll_base = of_iomap(np, 1); + if (!cpupll_base) { + pr_err("%s: Unable to map cpupll base\n", np->full_name); + iounmap(gbase); + return; + } + + /* overwrite default clock names with DT provided ones */ + clk = of_clk_get_by_name(np, clk_names[REFCLK]); + if (!IS_ERR(clk)) { + clk_names[REFCLK] = __clk_get_name(clk); + clk_put(clk); + } + + /* simple register PLLs */ + clk = berlin2_pll_register(&bg2q_pll_map, gbase + REG_SYSPLLCTL0, + clk_names[SYSPLL], clk_names[REFCLK], 0); + if (IS_ERR(clk)) + goto bg2q_fail; + + clk = berlin2_pll_register(&bg2q_pll_map, cpupll_base, + clk_names[CPUPLL], clk_names[REFCLK], 0); + if (IS_ERR(clk)) + goto bg2q_fail; + + /* TODO: add BG2Q AVPLL */ + + /* + * TODO: add reference clock bypass switches: + * memPLLSWBypass, cpuPLLSWBypass, and sysPLLSWBypass + */ + + /* clock divider cells */ + for (n = 0; n < ARRAY_SIZE(bg2q_divs); n++) { + const struct berlin2_div_data *dd = &bg2q_divs[n]; + int k; + + for (k = 0; k < dd->num_parents; k++) + parent_names[k] = clk_names[dd->parent_ids[k]]; + + clks[CLKID_SYS + n] = berlin2_div_register(&dd->map, gbase, + dd->name, dd->div_flags, parent_names, + dd->num_parents, dd->flags, &lock); + } + + /* clock gate cells */ + for (n = 0; n < ARRAY_SIZE(bg2q_gates); n++) { + const struct berlin2_gate_data *gd = &bg2q_gates[n]; + + clks[CLKID_GFX2DAXI + n] = clk_register_gate(NULL, gd->name, + gd->parent_name, gd->flags, gbase + REG_CLKENABLE, + gd->bit_idx, 0, &lock); + } + + /* + * twdclk is derived from cpu/3 + * TODO: use cpupll until cpuclk is not available + */ + clks[CLKID_TWD] = + clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL], + 0, 1, 3); + + /* check for errors on leaf clocks */ + for (n = 0; n < MAX_CLKS; n++) { + if (!IS_ERR(clks[n])) + continue; + + pr_err("%s: Unable to register leaf clock %d\n", + np->full_name, n); + goto bg2q_fail; + } + + /* register clk-provider */ + clk_data.clks = clks; + clk_data.clk_num = MAX_CLKS; + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + return; + +bg2q_fail: + iounmap(cpupll_base); + iounmap(gbase); +} +CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl", + berlin2q_clock_setup); diff --git a/drivers/clk/berlin/common.h b/drivers/clk/berlin/common.h new file mode 100644 index 000000000000..bc68a14c4550 --- /dev/null +++ b/drivers/clk/berlin/common.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2014 Marvell Technology Group Ltd. + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __BERLIN2_COMMON_H +#define __BERLIN2_COMMON_H + +struct berlin2_gate_data { + const char *name; + const char *parent_name; + u8 bit_idx; + unsigned long flags; +}; + +#endif /* BERLIN2_COMMON_H */ diff --git a/drivers/clk/clk-axm5516.c b/drivers/clk/clk-axm5516.c new file mode 100644 index 000000000000..d2f1e119b450 --- /dev/null +++ b/drivers/clk/clk-axm5516.c @@ -0,0 +1,615 @@ +/* + * drivers/clk/clk-axm5516.c + * + * Provides clock implementations for three different types of clock devices on + * the Axxia device: PLL clock, a clock divider and a clock mux. + * + * Copyright (C) 2014 LSI Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + + +/** + * struct axxia_clk - Common struct to all Axxia clocks. + * @hw: clk_hw for the common clk framework + * @regmap: Regmap for the clock control registers + */ +struct axxia_clk { + struct clk_hw hw; + struct regmap *regmap; +}; +#define to_axxia_clk(_hw) container_of(_hw, struct axxia_clk, hw) + +/** + * struct axxia_pllclk - Axxia PLL generated clock. + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + */ +struct axxia_pllclk { + struct axxia_clk aclk; + u32 reg; +}; +#define to_axxia_pllclk(_aclk) container_of(_aclk, struct axxia_pllclk, aclk) + +/** + * axxia_pllclk_recalc - Calculate the PLL generated clock rate given the + * parent clock rate. + */ +static unsigned long +axxia_pllclk_recalc(struct clk_hw *hw, unsigned long parent_rate) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_pllclk *pll = to_axxia_pllclk(aclk); + unsigned long rate, fbdiv, refdiv, postdiv; + u32 control; + + regmap_read(aclk->regmap, pll->reg, &control); + postdiv = ((control >> 0) & 0xf) + 1; + fbdiv = ((control >> 4) & 0xfff) + 3; + refdiv = ((control >> 16) & 0x1f) + 1; + rate = (parent_rate / (refdiv * postdiv)) * fbdiv; + + return rate; +} + +static const struct clk_ops axxia_pllclk_ops = { + .recalc_rate = axxia_pllclk_recalc, +}; + +/** + * struct axxia_divclk - Axxia clock divider + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + * @shift: Bit position for divider value + * @width: Number of bits in divider value + */ +struct axxia_divclk { + struct axxia_clk aclk; + u32 reg; + u32 shift; + u32 width; +}; +#define to_axxia_divclk(_aclk) container_of(_aclk, struct axxia_divclk, aclk) + +/** + * axxia_divclk_recalc_rate - Calculate clock divider output rage + */ +static unsigned long +axxia_divclk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_divclk *divclk = to_axxia_divclk(aclk); + u32 ctrl, div; + + regmap_read(aclk->regmap, divclk->reg, &ctrl); + div = 1 + ((ctrl >> divclk->shift) & ((1 << divclk->width)-1)); + + return parent_rate / div; +} + +static const struct clk_ops axxia_divclk_ops = { + .recalc_rate = axxia_divclk_recalc_rate, +}; + +/** + * struct axxia_clkmux - Axxia clock mux + * @aclk: Common struct + * @reg: Offset into regmap for PLL control register + * @shift: Bit position for selection value + * @width: Number of bits in selection value + */ +struct axxia_clkmux { + struct axxia_clk aclk; + u32 reg; + u32 shift; + u32 width; +}; +#define to_axxia_clkmux(_aclk) container_of(_aclk, struct axxia_clkmux, aclk) + +/** + * axxia_clkmux_get_parent - Return the index of selected parent clock + */ +static u8 axxia_clkmux_get_parent(struct clk_hw *hw) +{ + struct axxia_clk *aclk = to_axxia_clk(hw); + struct axxia_clkmux *mux = to_axxia_clkmux(aclk); + u32 ctrl, parent; + + regmap_read(aclk->regmap, mux->reg, &ctrl); + parent = (ctrl >> mux->shift) & ((1 << mux->width) - 1); + + return (u8) parent; +} + +static const struct clk_ops axxia_clkmux_ops = { + .get_parent = axxia_clkmux_get_parent, +}; + + +/* + * PLLs + */ + +static struct axxia_pllclk clk_fab_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x01800, +}; + +static struct axxia_pllclk clk_cpu_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x02000, +}; + +static struct axxia_pllclk clk_sys_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys_pll", + .parent_names = (const char *[]){ + "clk_ref0" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x02800, +}; + +static struct axxia_pllclk clk_sm0_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sm0_pll", + .parent_names = (const char *[]){ + "clk_ref2" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x03000, +}; + +static struct axxia_pllclk clk_sm1_pll = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sm1_pll", + .parent_names = (const char *[]){ + "clk_ref1" + }, + .num_parents = 1, + .ops = &axxia_pllclk_ops, + }, + .reg = 0x03800, +}; + +/* + * Clock dividers + */ + +static struct axxia_divclk clk_cpu0_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu0_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 0, + .width = 4, +}; + +static struct axxia_divclk clk_cpu1_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu1_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 4, + .width = 4, +}; + +static struct axxia_divclk clk_cpu2_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu2_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 8, + .width = 4, +}; + +static struct axxia_divclk clk_cpu3_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu3_div", + .parent_names = (const char *[]){ + "clk_cpu_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x10008, + .shift = 12, + .width = 4, +}; + +static struct axxia_divclk clk_nrcp_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_nrcp_div", + .parent_names = (const char *[]){ + "clk_sys_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 0, + .width = 4, +}; + +static struct axxia_divclk clk_sys_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys_div", + .parent_names = (const char *[]){ + "clk_sys_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 4, + .width = 4, +}; + +static struct axxia_divclk clk_fab_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab_div", + .parent_names = (const char *[]){ + "clk_fab_pll" + }, + .num_parents = 1, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 8, + .width = 4, +}; + +static struct axxia_divclk clk_per_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_per_div", + .parent_names = (const char *[]){ + "clk_sm1_pll" + }, + .num_parents = 1, + .flags = CLK_IS_BASIC, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 12, + .width = 4, +}; + +static struct axxia_divclk clk_mmc_div = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_mmc_div", + .parent_names = (const char *[]){ + "clk_sm1_pll" + }, + .num_parents = 1, + .flags = CLK_IS_BASIC, + .ops = &axxia_divclk_ops, + }, + .reg = 0x1000c, + .shift = 16, + .width = 4, +}; + +/* + * Clock MUXes + */ + +static struct axxia_clkmux clk_cpu0_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu0", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu0_div", + "clk_cpu0_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 0, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu1_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu1", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu1_div", + "clk_cpu1_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 2, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu2_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu2", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu2_div", + "clk_cpu2_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 4, + .width = 2, +}; + +static struct axxia_clkmux clk_cpu3_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_cpu3", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_cpu_pll", + "clk_cpu3_div", + "clk_cpu3_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10000, + .shift = 6, + .width = 2, +}; + +static struct axxia_clkmux clk_nrcp_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_nrcp", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_sys_pll", + "clk_nrcp_div", + "clk_nrcp_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 0, + .width = 2, +}; + +static struct axxia_clkmux clk_sys_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_sys", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_sys_pll", + "clk_sys_div", + "clk_sys_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 2, + .width = 2, +}; + +static struct axxia_clkmux clk_fab_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_fab", + .parent_names = (const char *[]){ + "clk_ref0", + "clk_fab_pll", + "clk_fab_div", + "clk_fab_div" + }, + .num_parents = 4, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 4, + .width = 2, +}; + +static struct axxia_clkmux clk_per_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_per", + .parent_names = (const char *[]){ + "clk_ref1", + "clk_per_div" + }, + .num_parents = 2, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 6, + .width = 1, +}; + +static struct axxia_clkmux clk_mmc_mux = { + .aclk.hw.init = &(struct clk_init_data){ + .name = "clk_mmc", + .parent_names = (const char *[]){ + "clk_ref1", + "clk_mmc_div" + }, + .num_parents = 2, + .ops = &axxia_clkmux_ops, + }, + .reg = 0x10004, + .shift = 9, + .width = 1, +}; + +/* Table of all supported clocks indexed by the clock identifiers from the + * device tree binding + */ +static struct axxia_clk *axmclk_clocks[] = { + [AXXIA_CLK_FAB_PLL] = &clk_fab_pll.aclk, + [AXXIA_CLK_CPU_PLL] = &clk_cpu_pll.aclk, + [AXXIA_CLK_SYS_PLL] = &clk_sys_pll.aclk, + [AXXIA_CLK_SM0_PLL] = &clk_sm0_pll.aclk, + [AXXIA_CLK_SM1_PLL] = &clk_sm1_pll.aclk, + [AXXIA_CLK_FAB_DIV] = &clk_fab_div.aclk, + [AXXIA_CLK_SYS_DIV] = &clk_sys_div.aclk, + [AXXIA_CLK_NRCP_DIV] = &clk_nrcp_div.aclk, + [AXXIA_CLK_CPU0_DIV] = &clk_cpu0_div.aclk, + [AXXIA_CLK_CPU1_DIV] = &clk_cpu1_div.aclk, + [AXXIA_CLK_CPU2_DIV] = &clk_cpu2_div.aclk, + [AXXIA_CLK_CPU3_DIV] = &clk_cpu3_div.aclk, + [AXXIA_CLK_PER_DIV] = &clk_per_div.aclk, + [AXXIA_CLK_MMC_DIV] = &clk_mmc_div.aclk, + [AXXIA_CLK_FAB] = &clk_fab_mux.aclk, + [AXXIA_CLK_SYS] = &clk_sys_mux.aclk, + [AXXIA_CLK_NRCP] = &clk_nrcp_mux.aclk, + [AXXIA_CLK_CPU0] = &clk_cpu0_mux.aclk, + [AXXIA_CLK_CPU1] = &clk_cpu1_mux.aclk, + [AXXIA_CLK_CPU2] = &clk_cpu2_mux.aclk, + [AXXIA_CLK_CPU3] = &clk_cpu3_mux.aclk, + [AXXIA_CLK_PER] = &clk_per_mux.aclk, + [AXXIA_CLK_MMC] = &clk_mmc_mux.aclk, +}; + +static const struct regmap_config axmclk_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x1fffc, + .fast_io = true, +}; + +static const struct of_device_id axmclk_match_table[] = { + { .compatible = "lsi,axm5516-clks" }, + { } +}; +MODULE_DEVICE_TABLE(of, axmclk_match_table); + +struct axmclk_priv { + struct clk_onecell_data onecell; + struct clk *clks[]; +}; + +static int axmclk_probe(struct platform_device *pdev) +{ + void __iomem *base; + struct resource *res; + int i, ret; + struct device *dev = &pdev->dev; + struct clk *clk; + struct regmap *regmap; + size_t num_clks; + struct axmclk_priv *priv; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &axmclk_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + num_clks = ARRAY_SIZE(axmclk_clocks); + pr_info("axmclk: supporting %u clocks\n", num_clks); + priv = devm_kzalloc(dev, sizeof(*priv) + sizeof(*priv->clks) * num_clks, + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->onecell.clks = priv->clks; + priv->onecell.clk_num = num_clks; + + /* Update each entry with the allocated regmap and register the clock + * with the common clock framework + */ + for (i = 0; i < num_clks; i++) { + axmclk_clocks[i]->regmap = regmap; + clk = devm_clk_register(dev, &axmclk_clocks[i]->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + priv->clks[i] = clk; + } + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &priv->onecell); + + return ret; +} + +static int axmclk_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + return 0; +} + +static struct platform_driver axmclk_driver = { + .probe = axmclk_probe, + .remove = axmclk_remove, + .driver = { + .name = "clk-axm5516", + .owner = THIS_MODULE, + .of_match_table = axmclk_match_table, + }, +}; + +static int __init axmclk_init(void) +{ + return platform_driver_register(&axmclk_driver); +} +core_initcall(axmclk_init); + +static void __exit axmclk_exit(void) +{ + platform_driver_unregister(&axmclk_driver); +} +module_exit(axmclk_exit); + +MODULE_DESCRIPTION("AXM5516 clock driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:clk-axm5516"); diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 3fbee4540228..18a9de29df0e 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -43,6 +43,17 @@ static unsigned int _get_table_maxdiv(const struct clk_div_table *table) return maxdiv; } +static unsigned int _get_table_mindiv(const struct clk_div_table *table) +{ + unsigned int mindiv = UINT_MAX; + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div < mindiv) + mindiv = clkt->div; + return mindiv; +} + static unsigned int _get_maxdiv(struct clk_divider *divider) { if (divider->flags & CLK_DIVIDER_ONE_BASED) @@ -162,6 +173,24 @@ static int _round_up_table(const struct clk_div_table *table, int div) return up; } +static int _round_down_table(const struct clk_div_table *table, int div) +{ + const struct clk_div_table *clkt; + int down = _get_table_mindiv(table); + + for (clkt = table; clkt->div; clkt++) { + if (clkt->div == div) + return clkt->div; + else if (clkt->div > div) + continue; + + if ((div - clkt->div) < (div - down)) + down = clkt->div; + } + + return down; +} + static int _div_round_up(struct clk_divider *divider, unsigned long parent_rate, unsigned long rate) { @@ -175,6 +204,54 @@ static int _div_round_up(struct clk_divider *divider, return div; } +static int _div_round_closest(struct clk_divider *divider, + unsigned long parent_rate, unsigned long rate) +{ + int up, down, div; + + up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate); + + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) { + up = __roundup_pow_of_two(div); + down = __rounddown_pow_of_two(div); + } else if (divider->table) { + up = _round_up_table(divider->table, div); + down = _round_down_table(divider->table, div); + } + + return (up - div) <= (div - down) ? up : down; +} + +static int _div_round(struct clk_divider *divider, unsigned long parent_rate, + unsigned long rate) +{ + if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST) + return _div_round_closest(divider, parent_rate, rate); + + return _div_round_up(divider, parent_rate, rate); +} + +static bool _is_best_div(struct clk_divider *divider, + unsigned long rate, unsigned long now, unsigned long best) +{ + if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST) + return abs(rate - now) < abs(rate - best); + + return now <= rate && now > best; +} + +static int _next_div(struct clk_divider *divider, int div) +{ + div++; + + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return __roundup_pow_of_two(div); + if (divider->table) + return _round_up_table(divider->table, div); + + return div; +} + static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate) { @@ -190,7 +267,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { parent_rate = *best_parent_rate; - bestdiv = _div_round_up(divider, parent_rate, rate); + bestdiv = _div_round(divider, parent_rate, rate); bestdiv = bestdiv == 0 ? 1 : bestdiv; bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; return bestdiv; @@ -202,7 +279,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, */ maxdiv = min(ULONG_MAX / rate, maxdiv); - for (i = 1; i <= maxdiv; i++) { + for (i = 1; i <= maxdiv; i = _next_div(divider, i)) { if (!_is_valid_div(divider, i)) continue; if (rate * i == parent_rate_saved) { @@ -217,7 +294,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), MULT_ROUND_UP(rate, i)); now = DIV_ROUND_UP(parent_rate, i); - if (now <= rate && now > best) { + if (_is_best_div(divider, rate, now, best)) { bestdiv = i; best = now; *best_parent_rate = parent_rate; @@ -284,6 +361,11 @@ const struct clk_ops clk_divider_ops = { }; EXPORT_SYMBOL_GPL(clk_divider_ops); +const struct clk_ops clk_divider_ro_ops = { + .recalc_rate = clk_divider_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_divider_ro_ops); + static struct clk *_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -309,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name, } init.name = name; - init.ops = &clk_divider_ops; + if (clk_divider_flags & CLK_DIVIDER_READ_ONLY) + init.ops = &clk_divider_ro_ops; + else + init.ops = &clk_divider_ops; init.flags = flags | CLK_IS_BASIC; init.parent_names = (parent_name ? &parent_name: NULL); init.num_parents = (parent_name ? 1 : 0); diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index f2f62a1bf61a..9b7b5859a420 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -1,7 +1,7 @@ /* * clk-s2mps11.c - Clock driver for S2MPS11. * - * Copyright (C) 2013 Samsung Electornics + * Copyright (C) 2013,2014 Samsung Electornics * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -13,10 +13,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> @@ -27,6 +23,7 @@ #include <linux/clk-provider.h> #include <linux/platform_device.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s5m8767.h> #include <linux/mfd/samsung/core.h> @@ -44,6 +41,7 @@ enum { struct s2mps11_clk { struct sec_pmic_dev *iodev; + struct device_node *clk_np; struct clk_hw hw; struct clk *clk; struct clk_lookup *lookup; @@ -125,7 +123,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = { }, }; -static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev) +static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = { + [S2MPS11_CLK_AP] = { + .name = "s2mps14_ap", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_BT] = { + .name = "s2mps14_bt", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + +static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev, + struct clk_init_data *clks_init) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct device_node *clk_np; @@ -140,14 +152,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev) return ERR_PTR(-EINVAL); } - clk_table = devm_kzalloc(&pdev->dev, sizeof(struct clk *) * - S2MPS11_CLKS_NUM, GFP_KERNEL); - if (!clk_table) - return ERR_PTR(-ENOMEM); - - for (i = 0; i < S2MPS11_CLKS_NUM; i++) + for (i = 0; i < S2MPS11_CLKS_NUM; i++) { + if (!clks_init[i].name) + continue; /* Skip clocks not present in some devices */ of_property_read_string_index(clk_np, "clock-output-names", i, - &s2mps11_clks_init[i].name); + &clks_init[i].name); + } return clk_np; } @@ -156,8 +166,8 @@ static int s2mps11_clk_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct s2mps11_clk *s2mps11_clks, *s2mps11_clk; - struct device_node *clk_np = NULL; unsigned int s2mps11_reg; + struct clk_init_data *clks_init; int i, ret = 0; u32 val; @@ -168,25 +178,39 @@ static int s2mps11_clk_probe(struct platform_device *pdev) s2mps11_clk = s2mps11_clks; - clk_np = s2mps11_clk_parse_dt(pdev); - if (IS_ERR(clk_np)) - return PTR_ERR(clk_np); + clk_table = devm_kzalloc(&pdev->dev, sizeof(struct clk *) * + S2MPS11_CLKS_NUM, GFP_KERNEL); + if (!clk_table) + return -ENOMEM; switch(platform_get_device_id(pdev)->driver_data) { case S2MPS11X: s2mps11_reg = S2MPS11_REG_RTC_CTRL; + clks_init = s2mps11_clks_init; + break; + case S2MPS14X: + s2mps11_reg = S2MPS14_REG_RTCCTRL; + clks_init = s2mps14_clks_init; break; case S5M8767X: s2mps11_reg = S5M8767_REG_CTRL1; + clks_init = s2mps11_clks_init; break; default: dev_err(&pdev->dev, "Invalid device type\n"); return -EINVAL; }; + /* Store clocks of_node in first element of s2mps11_clks array */ + s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, clks_init); + if (IS_ERR(s2mps11_clks->clk_np)) + return PTR_ERR(s2mps11_clks->clk_np); + for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) { + if (!clks_init[i].name) + continue; /* Skip clocks not present in some devices */ s2mps11_clk->iodev = iodev; - s2mps11_clk->hw.init = &s2mps11_clks_init[i]; + s2mps11_clk->hw.init = &clks_init[i]; s2mps11_clk->mask = 1 << i; s2mps11_clk->reg = s2mps11_reg; @@ -219,15 +243,18 @@ static int s2mps11_clk_probe(struct platform_device *pdev) clkdev_add(s2mps11_clk->lookup); } - if (clk_table) { - for (i = 0; i < S2MPS11_CLKS_NUM; i++) - clk_table[i] = s2mps11_clks[i].clk; - - clk_data.clks = clk_table; - clk_data.clk_num = S2MPS11_CLKS_NUM; - of_clk_add_provider(clk_np, of_clk_src_onecell_get, &clk_data); + for (i = 0; i < S2MPS11_CLKS_NUM; i++) { + /* Skip clocks not present on S2MPS14 */ + if (!clks_init[i].name) + continue; + clk_table[i] = s2mps11_clks[i].clk; } + clk_data.clks = clk_table; + clk_data.clk_num = S2MPS11_CLKS_NUM; + of_clk_add_provider(s2mps11_clks->clk_np, of_clk_src_onecell_get, + &clk_data); + platform_set_drvdata(pdev, s2mps11_clks); return ret; @@ -250,14 +277,23 @@ static int s2mps11_clk_remove(struct platform_device *pdev) struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev); int i; - for (i = 0; i < S2MPS11_CLKS_NUM; i++) + of_clk_del_provider(s2mps11_clks[0].clk_np); + /* Drop the reference obtained in s2mps11_clk_parse_dt */ + of_node_put(s2mps11_clks[0].clk_np); + + for (i = 0; i < S2MPS11_CLKS_NUM; i++) { + /* Skip clocks not present on S2MPS14 */ + if (!s2mps11_clks[i].lookup) + continue; clkdev_drop(s2mps11_clks[i].lookup); + } return 0; } static const struct platform_device_id s2mps11_clk_id[] = { { "s2mps11-clk", S2MPS11X}, + { "s2mps14-clk", S2MPS14X}, { "s5m8767-clk", S5M8767X}, { }, }; diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c index 4bbbe32585ec..fc167b3f8919 100644 --- a/drivers/clk/clk-si570.c +++ b/drivers/clk/clk-si570.c @@ -526,6 +526,6 @@ static struct i2c_driver si570_driver = { module_i2c_driver(si570_driver); MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); -MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com"); +MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>"); MODULE_DESCRIPTION("Si570 driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c index 3efbdd078d14..406bfc1375b2 100644 --- a/drivers/clk/clk-u300.c +++ b/drivers/clk/clk-u300.c @@ -1168,6 +1168,7 @@ static const struct of_device_id u300_clk_match[] __initconst = { .compatible = "stericsson,u300-syscon-mclk", .data = of_u300_syscon_mclk_init, }, + {} }; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 7cf2c093cc54..8b73edef151d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -106,12 +106,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level) if (!c) return; - seq_printf(s, "%*s%-*s %-11d %-12d %-10lu %-11lu", + seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, clk_get_rate(c), clk_get_accuracy(c)); - seq_printf(s, "\n"); } static void clk_summary_show_subtree(struct seq_file *s, struct clk *c, @@ -132,8 +131,8 @@ static int clk_summary_show(struct seq_file *s, void *data) { struct clk *c; - seq_printf(s, " clock enable_cnt prepare_cnt rate accuracy\n"); - seq_printf(s, "---------------------------------------------------------------------------------\n"); + seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy\n"); + seq_puts(s, "--------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -822,6 +821,9 @@ void __clk_unprepare(struct clk *clk) */ void clk_unprepare(struct clk *clk) { + if (IS_ERR_OR_NULL(clk)) + return; + clk_prepare_lock(); __clk_unprepare(clk); clk_prepare_unlock(); @@ -883,9 +885,6 @@ static void __clk_disable(struct clk *clk) if (!clk) return; - if (WARN_ON(IS_ERR(clk))) - return; - if (WARN_ON(clk->enable_count == 0)) return; @@ -914,6 +913,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; + if (IS_ERR_OR_NULL(clk)) + return; + flags = clk_enable_lock(); __clk_disable(clk); clk_enable_unlock(flags); @@ -1004,6 +1006,7 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) else return clk->rate; } +EXPORT_SYMBOL_GPL(__clk_round_rate); /** * clk_round_rate - round the given rate for a clk @@ -1115,6 +1118,13 @@ long clk_get_accuracy(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_get_accuracy); +static unsigned long clk_recalc(struct clk *clk, unsigned long parent_rate) +{ + if (clk->ops->recalc_rate) + return clk->ops->recalc_rate(clk->hw, parent_rate); + return parent_rate; +} + /** * __clk_recalc_rates * @clk: first clk in the subtree @@ -1140,10 +1150,7 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg) if (clk->parent) parent_rate = clk->parent->rate; - if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate); - else - clk->rate = parent_rate; + clk->rate = clk_recalc(clk, parent_rate); /* * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE @@ -1334,10 +1341,7 @@ static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate) unsigned long new_rate; int ret = NOTIFY_DONE; - if (clk->ops->recalc_rate) - new_rate = clk->ops->recalc_rate(clk->hw, parent_rate); - else - new_rate = parent_rate; + new_rate = clk_recalc(clk, parent_rate); /* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */ if (clk->notifier_count) @@ -1373,10 +1377,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate, new_parent->new_child = clk; hlist_for_each_entry(child, &clk->children, child_node) { - if (child->ops->recalc_rate) - child->new_rate = child->ops->recalc_rate(child->hw, new_rate); - else - child->new_rate = new_rate; + child->new_rate = clk_recalc(child, new_rate); clk_calc_subtree(child, child->new_rate, NULL, 0); } } @@ -1524,10 +1525,7 @@ static void clk_change_rate(struct clk *clk) if (!skip_set_rate && clk->ops->set_rate) clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); - if (clk->ops->recalc_rate) - clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate); - else - clk->rate = best_parent_rate; + clk->rate = clk_recalc(clk, best_parent_rate); if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); @@ -1716,9 +1714,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent) if (!clk) return 0; - if (!clk->ops) - return -EINVAL; - /* verify ops for for multi-parent clks */ if ((clk->num_parents > 1) && (!clk->ops->set_parent)) return -ENOSYS; diff --git a/drivers/clk/clk.h b/drivers/clk/clk.h index 795cc9f0dac0..c798138f023f 100644 --- a/drivers/clk/clk.h +++ b/drivers/clk/clk.h @@ -10,6 +10,7 @@ */ #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) +struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec); struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec); void of_clk_lock(void); void of_clk_unlock(void); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index a360b2eca5cb..f890b901c6bc 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -27,6 +27,32 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) + +/** + * of_clk_get_by_clkspec() - Lookup a clock form a clock provider + * @clkspec: pointer to a clock specifier data structure + * + * This function looks up a struct clk from the registered list of clock + * providers, an input is a clock specifier data structure as returned + * from the of_parse_phandle_with_args() function call. + */ +struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec) +{ + struct clk *clk; + + if (!clkspec) + return ERR_PTR(-EINVAL); + + of_clk_lock(); + clk = __of_clk_get_from_provider(clkspec); + + if (!IS_ERR(clk) && !__clk_get(clk)) + clk = ERR_PTR(-ENOENT); + + of_clk_unlock(); + return clk; +} + struct clk *of_clk_get(struct device_node *np, int index) { struct of_phandle_args clkspec; @@ -41,13 +67,7 @@ struct clk *of_clk_get(struct device_node *np, int index) if (rc) return ERR_PTR(rc); - of_clk_lock(); - clk = __of_clk_get_from_provider(&clkspec); - - if (!IS_ERR(clk) && !__clk_get(clk)) - clk = ERR_PTR(-ENOENT); - - of_clk_unlock(); + clk = of_clk_get_by_clkspec(&clkspec); of_node_put(clkspec.np); return clk; } diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile index 40b33c6a8257..038c02f4d0e7 100644 --- a/drivers/clk/hisilicon/Makefile +++ b/drivers/clk/hisilicon/Makefile @@ -6,3 +6,4 @@ obj-y += clk.o clkgate-separated.o obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o +obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c new file mode 100644 index 000000000000..e5fcfb4e32ef --- /dev/null +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/of_address.h> +#include <dt-bindings/clock/hix5hd2-clock.h> +#include "clk.h" + +static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = { + { HIX5HD2_FIXED_1200M, "1200m", NULL, CLK_IS_ROOT, 1200000000, }, + { HIX5HD2_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, }, + { HIX5HD2_FIXED_48M, "48m", NULL, CLK_IS_ROOT, 48000000, }, + { HIX5HD2_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, }, + { HIX5HD2_FIXED_600M, "600m", NULL, CLK_IS_ROOT, 600000000, }, + { HIX5HD2_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, }, + { HIX5HD2_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, }, + { HIX5HD2_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, }, + { HIX5HD2_FIXED_100M, "100m", NULL, CLK_IS_ROOT, 100000000, }, + { HIX5HD2_FIXED_40M, "40m", NULL, CLK_IS_ROOT, 40000000, }, + { HIX5HD2_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, }, + { HIX5HD2_FIXED_1728M, "1728m", NULL, CLK_IS_ROOT, 1728000000, }, + { HIX5HD2_FIXED_28P8M, "28p8m", NULL, CLK_IS_ROOT, 28000000, }, + { HIX5HD2_FIXED_432M, "432m", NULL, CLK_IS_ROOT, 432000000, }, + { HIX5HD2_FIXED_345P6M, "345p6m", NULL, CLK_IS_ROOT, 345000000, }, + { HIX5HD2_FIXED_288M, "288m", NULL, CLK_IS_ROOT, 288000000, }, + { HIX5HD2_FIXED_60M, "60m", NULL, CLK_IS_ROOT, 60000000, }, + { HIX5HD2_FIXED_750M, "750m", NULL, CLK_IS_ROOT, 750000000, }, + { HIX5HD2_FIXED_500M, "500m", NULL, CLK_IS_ROOT, 500000000, }, + { HIX5HD2_FIXED_54M, "54m", NULL, CLK_IS_ROOT, 54000000, }, + { HIX5HD2_FIXED_27M, "27m", NULL, CLK_IS_ROOT, 27000000, }, + { HIX5HD2_FIXED_1500M, "1500m", NULL, CLK_IS_ROOT, 1500000000, }, + { HIX5HD2_FIXED_375M, "375m", NULL, CLK_IS_ROOT, 375000000, }, + { HIX5HD2_FIXED_187M, "187m", NULL, CLK_IS_ROOT, 187000000, }, + { HIX5HD2_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, }, + { HIX5HD2_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, }, + { HIX5HD2_FIXED_2P02M, "2m", NULL, CLK_IS_ROOT, 2000000, }, + { HIX5HD2_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, }, + { HIX5HD2_FIXED_25M, "25m", NULL, CLK_IS_ROOT, 25000000, }, + { HIX5HD2_FIXED_83M, "83m", NULL, CLK_IS_ROOT, 83333333, }, +}; + +static const char *sfc_mux_p[] __initconst = { + "24m", "150m", "200m", "100m", "75m", }; +static u32 sfc_mux_table[] = {0, 4, 5, 6, 7}; + +static const char *sdio1_mux_p[] __initconst = { + "75m", "100m", "50m", "15m", }; +static u32 sdio1_mux_table[] = {0, 1, 2, 3}; + +static const char *fephy_mux_p[] __initconst = { "25m", "125m"}; +static u32 fephy_mux_table[] = {0, 1}; + + +static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = { + { HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p), + CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, }, + { HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p), + CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, }, + { HIX5HD2_FEPHY_MUX, "fephy_mux", + fephy_mux_p, ARRAY_SIZE(fephy_mux_p), + CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, }, +}; + +static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { + /*sfc*/ + { HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux", + CLK_SET_RATE_PARENT, 0x5c, 0, 0, }, + { HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc", + CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, }, + /*sdio1*/ + { HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m", + CLK_SET_RATE_PARENT, 0xa0, 0, 0, }, + { HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux", + CLK_SET_RATE_PARENT, 0xa0, 1, 0, }, + { HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu", + CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, }, +}; + +static void __init hix5hd2_clk_init(struct device_node *np) +{ + struct hisi_clock_data *clk_data; + + clk_data = hisi_clk_init(np, HIX5HD2_NR_CLKS); + if (!clk_data) + return; + + hisi_clk_register_fixed_rate(hix5hd2_fixed_rate_clks, + ARRAY_SIZE(hix5hd2_fixed_rate_clks), + clk_data); + hisi_clk_register_mux(hix5hd2_mux_clks, ARRAY_SIZE(hix5hd2_mux_clks), + clk_data); + hisi_clk_register_gate(hix5hd2_gate_clks, + ARRAY_SIZE(hix5hd2_gate_clks), clk_data); +} + +CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init); diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c index 276f672e7b1a..a078e84f7b05 100644 --- a/drivers/clk/hisilicon/clk.c +++ b/drivers/clk/hisilicon/clk.c @@ -127,11 +127,14 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *clks, int i; for (i = 0; i < nums; i++) { - clk = clk_register_mux(NULL, clks[i].name, clks[i].parent_names, - clks[i].num_parents, clks[i].flags, - base + clks[i].offset, clks[i].shift, - clks[i].width, clks[i].mux_flags, - &hisi_clk_lock); + u32 mask = BIT(clks[i].width) - 1; + + clk = clk_register_mux_table(NULL, clks[i].name, + clks[i].parent_names, + clks[i].num_parents, clks[i].flags, + base + clks[i].offset, clks[i].shift, + mask, clks[i].mux_flags, + clks[i].table, &hisi_clk_lock); if (IS_ERR(clk)) { pr_err("%s: failed to register clock %s\n", __func__, clks[i].name); @@ -174,6 +177,34 @@ void __init hisi_clk_register_divider(struct hisi_divider_clock *clks, } } +void __init hisi_clk_register_gate(struct hisi_gate_clock *clks, + int nums, struct hisi_clock_data *data) +{ + struct clk *clk; + void __iomem *base = data->base; + int i; + + for (i = 0; i < nums; i++) { + clk = clk_register_gate(NULL, clks[i].name, + clks[i].parent_name, + clks[i].flags, + base + clks[i].offset, + clks[i].bit_idx, + clks[i].gate_flags, + &hisi_clk_lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + continue; + } + + if (clks[i].alias) + clk_register_clkdev(clk, clks[i].alias, NULL); + + data->clk_data.clks[clks[i].id] = clk; + } +} + void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *clks, int nums, struct hisi_clock_data *data) { diff --git a/drivers/clk/hisilicon/clk.h b/drivers/clk/hisilicon/clk.h index 43fa5da88f02..31083ffc0650 100644 --- a/drivers/clk/hisilicon/clk.h +++ b/drivers/clk/hisilicon/clk.h @@ -62,6 +62,7 @@ struct hisi_mux_clock { u8 shift; u8 width; u8 mux_flags; + u32 *table; const char *alias; }; @@ -103,6 +104,8 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *, int, struct hisi_clock_data *); void __init hisi_clk_register_divider(struct hisi_divider_clock *, int, struct hisi_clock_data *); +void __init hisi_clk_register_gate(struct hisi_gate_clock *, + int, struct hisi_clock_data *); void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *, int, struct hisi_clock_data *); #endif /* __HISI_CLK_H */ diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 693f7be129f1..3b34dba9178d 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -34,3 +34,7 @@ config DOVE_CLK config KIRKWOOD_CLK bool select MVEBU_CLK_COMMON + +config ORION_CLK + bool + select MVEBU_CLK_COMMON diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 4c66162fb0b4..a9a56fc01901 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_ARMADA_38X_CLK) += armada-38x.o obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o obj-$(CONFIG_DOVE_CLK) += dove.o obj-$(CONFIG_KIRKWOOD_CLK) += kirkwood.o +obj-$(CONFIG_ORION_CLK) += orion.o diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c new file mode 100644 index 000000000000..fd129566c1ce --- /dev/null +++ b/drivers/clk/mvebu/orion.c @@ -0,0 +1,210 @@ +/* + * Marvell Orion SoC clocks + * + * Copyright (C) 2014 Thomas Petazzoni + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = { + { .id = 0, .name = "ddrclk", } +}; + +/* + * Orion 5182 + */ + +#define SAR_MV88F5182_TCLK_FREQ 8 +#define SAR_MV88F5182_TCLK_FREQ_MASK 0x3 + +static u32 __init mv88f5182_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_TCLK_FREQ) & + SAR_MV88F5182_TCLK_FREQ_MASK; + if (opt == 1) + return 150000000; + else if (opt == 2) + return 166666667; + else + return 0; +} + +#define SAR_MV88F5182_CPU_FREQ 4 +#define SAR_MV88F5182_CPU_FREQ_MASK 0xf + +static u32 __init mv88f5182_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) & + SAR_MV88F5182_CPU_FREQ_MASK; + if (opt == 0) + return 333333333; + else if (opt == 1 || opt == 2) + return 400000000; + else if (opt == 3) + return 500000000; + else + return 0; +} + +static void __init mv88f5182_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) & + SAR_MV88F5182_CPU_FREQ_MASK; + if (opt == 0 || opt == 1) { + *mult = 1; + *div = 2; + } else if (opt == 2 || opt == 3) { + *mult = 1; + *div = 3; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f5182_coreclks = { + .get_tclk_freq = mv88f5182_get_tclk_freq, + .get_cpu_freq = mv88f5182_get_cpu_freq, + .get_clk_ratio = mv88f5182_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + +static void __init mv88f5182_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f5182_coreclks); +} + +CLK_OF_DECLARE(mv88f5182_clk, "marvell,mv88f5182-core-clock", mv88f5182_clk_init); + +/* + * Orion 5281 + */ + +static u32 __init mv88f5281_get_tclk_freq(void __iomem *sar) +{ + /* On 5281, tclk is always 166 Mhz */ + return 166666667; +} + +#define SAR_MV88F5281_CPU_FREQ 4 +#define SAR_MV88F5281_CPU_FREQ_MASK 0xf + +static u32 __init mv88f5281_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) & + SAR_MV88F5281_CPU_FREQ_MASK; + if (opt == 1 || opt == 2) + return 400000000; + else if (opt == 3) + return 500000000; + else + return 0; +} + +static void __init mv88f5281_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) & + SAR_MV88F5281_CPU_FREQ_MASK; + if (opt == 1) { + *mult = 1; + *div = 2; + } else if (opt == 2 || opt == 3) { + *mult = 1; + *div = 3; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f5281_coreclks = { + .get_tclk_freq = mv88f5281_get_tclk_freq, + .get_cpu_freq = mv88f5281_get_cpu_freq, + .get_clk_ratio = mv88f5281_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + +static void __init mv88f5281_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f5281_coreclks); +} + +CLK_OF_DECLARE(mv88f5281_clk, "marvell,mv88f5281-core-clock", mv88f5281_clk_init); + +/* + * Orion 6183 + */ + +#define SAR_MV88F6183_TCLK_FREQ 9 +#define SAR_MV88F6183_TCLK_FREQ_MASK 0x1 + +static u32 __init mv88f6183_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_TCLK_FREQ) & + SAR_MV88F6183_TCLK_FREQ_MASK; + if (opt == 0) + return 133333333; + else if (opt == 1) + return 166666667; + else + return 0; +} + +#define SAR_MV88F6183_CPU_FREQ 1 +#define SAR_MV88F6183_CPU_FREQ_MASK 0x3f + +static u32 __init mv88f6183_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) & + SAR_MV88F6183_CPU_FREQ_MASK; + if (opt == 9) + return 333333333; + else if (opt == 17) + return 400000000; + else + return 0; +} + +static void __init mv88f6183_get_clk_ratio(void __iomem *sar, int id, + int *mult, int *div) +{ + u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) & + SAR_MV88F6183_CPU_FREQ_MASK; + if (opt == 9 || opt == 17) { + *mult = 1; + *div = 2; + } else { + *mult = 0; + *div = 1; + } +} + +static const struct coreclk_soc_desc mv88f6183_coreclks = { + .get_tclk_freq = mv88f6183_get_tclk_freq, + .get_cpu_freq = mv88f6183_get_cpu_freq, + .get_clk_ratio = mv88f6183_get_clk_ratio, + .ratios = orion_coreclk_ratios, + .num_ratios = ARRAY_SIZE(orion_coreclk_ratios), +}; + + +static void __init mv88f6183_clk_init(struct device_node *np) +{ + return mvebu_coreclk_setup(np, &mv88f6183_coreclks); +} + +CLK_OF_DECLARE(mv88f6183_clk, "marvell,mv88f6183-core-clock", mv88f6183_clk_init); diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 995bcfa021a4..7f696b7d4422 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -13,10 +13,10 @@ config MSM_GCC_8660 i2c, USB, SD/eMMC, etc. config MSM_GCC_8960 - tristate "MSM8960 Global Clock Controller" + tristate "APQ8064/MSM8960 Global Clock Controller" depends on COMMON_CLK_QCOM help - Support for the global clock controller on msm8960 devices. + Support for the global clock controller on apq8064/msm8960 devices. Say Y if you want to use peripheral devices such as UART, SPI, i2c, USB, SD/eMMC, SATA, PCIe, etc. diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index f60db2ef1aee..689e05bf4f95 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o +clk-qcom-y += common.o clk-qcom-y += clk-regmap.o clk-qcom-y += clk-pll.o clk-qcom-y += clk-rcg.o diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h index 1d6b6dece328..b9ec11dfd1b4 100644 --- a/drivers/clk/qcom/clk-rcg.h +++ b/drivers/clk/qcom/clk-rcg.h @@ -155,5 +155,8 @@ struct clk_rcg2 { #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr) extern const struct clk_ops clk_rcg2_ops; +extern const struct clk_ops clk_edp_pixel_ops; +extern const struct clk_ops clk_byte_ops; +extern const struct clk_ops clk_pixel_ops; #endif diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index 00f878a04d3f..cd185d5cc67a 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -19,6 +19,7 @@ #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/regmap.h> +#include <linux/math64.h> #include <asm/div64.h> @@ -55,7 +56,7 @@ static int clk_rcg2_is_enabled(struct clk_hw *hw) if (ret) return ret; - return (cmd & CMD_ROOT_OFF) != 0; + return (cmd & CMD_ROOT_OFF) == 0; } static u8 clk_rcg2_get_parent(struct clk_hw *hw) @@ -181,7 +182,8 @@ struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate) if (rate <= f->freq) return f; - return NULL; + /* Default to our fastest rate */ + return f - 1; } static long _freq_tbl_determine_rate(struct clk_hw *hw, @@ -224,31 +226,25 @@ static long clk_rcg2_determine_rate(struct clk_hw *hw, unsigned long rate, return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p); } -static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate) +static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) { - struct clk_rcg2 *rcg = to_clk_rcg2(hw); - const struct freq_tbl *f; u32 cfg, mask; int ret; - f = find_freq(rcg->freq_tbl, rate); - if (!f) - return -EINVAL; - if (rcg->mnd_width && f->n) { mask = BIT(rcg->mnd_width) - 1; - ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + M_REG, - mask, f->m); + ret = regmap_update_bits(rcg->clkr.regmap, + rcg->cmd_rcgr + M_REG, mask, f->m); if (ret) return ret; - ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + N_REG, - mask, ~(f->n - f->m)); + ret = regmap_update_bits(rcg->clkr.regmap, + rcg->cmd_rcgr + N_REG, mask, ~(f->n - f->m)); if (ret) return ret; - ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + D_REG, - mask, ~f->n); + ret = regmap_update_bits(rcg->clkr.regmap, + rcg->cmd_rcgr + D_REG, mask, ~f->n); if (ret) return ret; } @@ -259,14 +255,26 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate) cfg |= rcg->parent_map[f->src] << CFG_SRC_SEL_SHIFT; if (rcg->mnd_width && f->n) cfg |= CFG_MODE_DUAL_EDGE; - ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, mask, - cfg); + ret = regmap_update_bits(rcg->clkr.regmap, + rcg->cmd_rcgr + CFG_REG, mask, cfg); if (ret) return ret; return update_config(rcg); } +static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + const struct freq_tbl *f; + + f = find_freq(rcg->freq_tbl, rate); + if (!f) + return -EINVAL; + + return clk_rcg2_configure(rcg, f); +} + static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -289,3 +297,265 @@ const struct clk_ops clk_rcg2_ops = { .set_rate_and_parent = clk_rcg2_set_rate_and_parent, }; EXPORT_SYMBOL_GPL(clk_rcg2_ops); + +struct frac_entry { + int num; + int den; +}; + +static const struct frac_entry frac_table_675m[] = { /* link rate of 270M */ + { 52, 295 }, /* 119 M */ + { 11, 57 }, /* 130.25 M */ + { 63, 307 }, /* 138.50 M */ + { 11, 50 }, /* 148.50 M */ + { 47, 206 }, /* 154 M */ + { 31, 100 }, /* 205.25 M */ + { 107, 269 }, /* 268.50 M */ + { }, +}; + +static struct frac_entry frac_table_810m[] = { /* Link rate of 162M */ + { 31, 211 }, /* 119 M */ + { 32, 199 }, /* 130.25 M */ + { 63, 307 }, /* 138.50 M */ + { 11, 60 }, /* 148.50 M */ + { 50, 263 }, /* 154 M */ + { 31, 120 }, /* 205.25 M */ + { 119, 359 }, /* 268.50 M */ + { }, +}; + +static int clk_edp_pixel_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + struct freq_tbl f = *rcg->freq_tbl; + const struct frac_entry *frac; + int delta = 100000; + s64 src_rate = parent_rate; + s64 request; + u32 mask = BIT(rcg->hid_width) - 1; + u32 hid_div; + + if (src_rate == 810000000) + frac = frac_table_810m; + else + frac = frac_table_675m; + + for (; frac->num; frac++) { + request = rate; + request *= frac->den; + request = div_s64(request, frac->num); + if ((src_rate < (request - delta)) || + (src_rate > (request + delta))) + continue; + + regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, + &hid_div); + f.pre_div = hid_div; + f.pre_div >>= CFG_SRC_DIV_SHIFT; + f.pre_div &= mask; + f.m = frac->num; + f.n = frac->den; + + return clk_rcg2_configure(rcg, &f); + } + + return -EINVAL; +} + +static int clk_edp_pixel_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate, u8 index) +{ + /* Parent index is set statically in frequency table */ + return clk_edp_pixel_set_rate(hw, rate, parent_rate); +} + +static long clk_edp_pixel_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate, struct clk **p) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + const struct freq_tbl *f = rcg->freq_tbl; + const struct frac_entry *frac; + int delta = 100000; + s64 src_rate = *p_rate; + s64 request; + u32 mask = BIT(rcg->hid_width) - 1; + u32 hid_div; + + /* Force the correct parent */ + *p = clk_get_parent_by_index(hw->clk, f->src); + + if (src_rate == 810000000) + frac = frac_table_810m; + else + frac = frac_table_675m; + + for (; frac->num; frac++) { + request = rate; + request *= frac->den; + request = div_s64(request, frac->num); + if ((src_rate < (request - delta)) || + (src_rate > (request + delta))) + continue; + + regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, + &hid_div); + hid_div >>= CFG_SRC_DIV_SHIFT; + hid_div &= mask; + + return calc_rate(src_rate, frac->num, frac->den, !!frac->den, + hid_div); + } + + return -EINVAL; +} + +const struct clk_ops clk_edp_pixel_ops = { + .is_enabled = clk_rcg2_is_enabled, + .get_parent = clk_rcg2_get_parent, + .set_parent = clk_rcg2_set_parent, + .recalc_rate = clk_rcg2_recalc_rate, + .set_rate = clk_edp_pixel_set_rate, + .set_rate_and_parent = clk_edp_pixel_set_rate_and_parent, + .determine_rate = clk_edp_pixel_determine_rate, +}; +EXPORT_SYMBOL_GPL(clk_edp_pixel_ops); + +static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate, struct clk **p) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + const struct freq_tbl *f = rcg->freq_tbl; + unsigned long parent_rate, div; + u32 mask = BIT(rcg->hid_width) - 1; + + if (rate == 0) + return -EINVAL; + + *p = clk_get_parent_by_index(hw->clk, f->src); + *p_rate = parent_rate = __clk_round_rate(*p, rate); + + div = DIV_ROUND_UP((2 * parent_rate), rate) - 1; + div = min_t(u32, div, mask); + + return calc_rate(parent_rate, 0, 0, 0, div); +} + +static int clk_byte_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + struct freq_tbl f = *rcg->freq_tbl; + unsigned long div; + u32 mask = BIT(rcg->hid_width) - 1; + + div = DIV_ROUND_UP((2 * parent_rate), rate) - 1; + div = min_t(u32, div, mask); + + f.pre_div = div; + + return clk_rcg2_configure(rcg, &f); +} + +static int clk_byte_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate, u8 index) +{ + /* Parent index is set statically in frequency table */ + return clk_byte_set_rate(hw, rate, parent_rate); +} + +const struct clk_ops clk_byte_ops = { + .is_enabled = clk_rcg2_is_enabled, + .get_parent = clk_rcg2_get_parent, + .set_parent = clk_rcg2_set_parent, + .recalc_rate = clk_rcg2_recalc_rate, + .set_rate = clk_byte_set_rate, + .set_rate_and_parent = clk_byte_set_rate_and_parent, + .determine_rate = clk_byte_determine_rate, +}; +EXPORT_SYMBOL_GPL(clk_byte_ops); + +static const struct frac_entry frac_table_pixel[] = { + { 3, 8 }, + { 2, 9 }, + { 4, 9 }, + { 1, 1 }, + { } +}; + +static long clk_pixel_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate, struct clk **p) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + unsigned long request, src_rate; + int delta = 100000; + const struct freq_tbl *f = rcg->freq_tbl; + const struct frac_entry *frac = frac_table_pixel; + struct clk *parent = *p = clk_get_parent_by_index(hw->clk, f->src); + + for (; frac->num; frac++) { + request = (rate * frac->den) / frac->num; + + src_rate = __clk_round_rate(parent, request); + if ((src_rate < (request - delta)) || + (src_rate > (request + delta))) + continue; + + *p_rate = src_rate; + return (src_rate * frac->num) / frac->den; + } + + return -EINVAL; +} + +static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + struct freq_tbl f = *rcg->freq_tbl; + const struct frac_entry *frac = frac_table_pixel; + unsigned long request, src_rate; + int delta = 100000; + u32 mask = BIT(rcg->hid_width) - 1; + u32 hid_div; + struct clk *parent = clk_get_parent_by_index(hw->clk, f.src); + + for (; frac->num; frac++) { + request = (rate * frac->den) / frac->num; + + src_rate = __clk_round_rate(parent, request); + if ((src_rate < (request - delta)) || + (src_rate > (request + delta))) + continue; + + regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, + &hid_div); + f.pre_div = hid_div; + f.pre_div >>= CFG_SRC_DIV_SHIFT; + f.pre_div &= mask; + f.m = frac->num; + f.n = frac->den; + + return clk_rcg2_configure(rcg, &f); + } + return -EINVAL; +} + +static int clk_pixel_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index) +{ + /* Parent index is set statically in frequency table */ + return clk_pixel_set_rate(hw, rate, parent_rate); +} + +const struct clk_ops clk_pixel_ops = { + .is_enabled = clk_rcg2_is_enabled, + .get_parent = clk_rcg2_get_parent, + .set_parent = clk_rcg2_set_parent, + .recalc_rate = clk_rcg2_recalc_rate, + .set_rate = clk_pixel_set_rate, + .set_rate_and_parent = clk_pixel_set_rate_and_parent, + .determine_rate = clk_pixel_determine_rate, +}; +EXPORT_SYMBOL_GPL(clk_pixel_ops); diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c new file mode 100644 index 000000000000..9b5a1cfc6b91 --- /dev/null +++ b/drivers/clk/qcom/common.c @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/export.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/reset-controller.h> + +#include "common.h" +#include "clk-regmap.h" +#include "reset.h" + +struct qcom_cc { + struct qcom_reset_controller reset; + struct clk_onecell_data data; + struct clk *clks[]; +}; + +int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc) +{ + void __iomem *base; + struct resource *res; + int i, ret; + struct device *dev = &pdev->dev; + struct clk *clk; + struct clk_onecell_data *data; + struct clk **clks; + struct regmap *regmap; + struct qcom_reset_controller *reset; + struct qcom_cc *cc; + size_t num_clks = desc->num_clks; + struct clk_regmap **rclks = desc->clks; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, desc->config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, + GFP_KERNEL); + if (!cc) + return -ENOMEM; + + clks = cc->clks; + data = &cc->data; + data->clks = clks; + data->clk_num = num_clks; + + for (i = 0; i < num_clks; i++) { + if (!rclks[i]) { + clks[i] = ERR_PTR(-ENOENT); + continue; + } + clk = devm_clk_register_regmap(dev, rclks[i]); + if (IS_ERR(clk)) + return PTR_ERR(clk); + clks[i] = clk; + } + + ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); + if (ret) + return ret; + + reset = &cc->reset; + reset->rcdev.of_node = dev->of_node; + reset->rcdev.ops = &qcom_reset_ops; + reset->rcdev.owner = dev->driver->owner; + reset->rcdev.nr_resets = desc->num_resets; + reset->regmap = regmap; + reset->reset_map = desc->resets; + platform_set_drvdata(pdev, &reset->rcdev); + + ret = reset_controller_register(&reset->rcdev); + if (ret) + of_clk_del_provider(dev->of_node); + + return ret; +} +EXPORT_SYMBOL_GPL(qcom_cc_probe); + +void qcom_cc_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + reset_controller_unregister(platform_get_drvdata(pdev)); +} +EXPORT_SYMBOL_GPL(qcom_cc_remove); diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h new file mode 100644 index 000000000000..2c3cfc860348 --- /dev/null +++ b/drivers/clk/qcom/common.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_CLK_COMMON_H__ +#define __QCOM_CLK_COMMON_H__ + +struct platform_device; +struct regmap_config; +struct clk_regmap; +struct qcom_reset_map; + +struct qcom_cc_desc { + const struct regmap_config *config; + struct clk_regmap **clks; + size_t num_clks; + const struct qcom_reset_map *resets; + size_t num_resets; +}; + +extern int qcom_cc_probe(struct platform_device *pdev, + const struct qcom_cc_desc *desc); + +extern void qcom_cc_remove(struct platform_device *pdev); + +#endif diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c index bc0b7f1fcfbe..0c4b727ae429 100644 --- a/drivers/clk/qcom/gcc-msm8660.c +++ b/drivers/clk/qcom/gcc-msm8660.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/reset/qcom,gcc-msm8660.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2701,51 +2702,24 @@ static const struct regmap_config gcc_msm8660_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8660_desc = { + .config = &gcc_msm8660_regmap_config, + .clks = gcc_msm8660_clks, + .num_clks = ARRAY_SIZE(gcc_msm8660_clks), + .resets = gcc_msm8660_resets, + .num_resets = ARRAY_SIZE(gcc_msm8660_resets), +}; + static const struct of_device_id gcc_msm8660_match_table[] = { { .compatible = "qcom,gcc-msm8660" }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int gcc_msm8660_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8660_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8660_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); @@ -2756,39 +2730,12 @@ static int gcc_msm8660_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8660_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8660_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8660_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8660_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &gcc_msm8660_desc); } static int gcc_msm8660_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index fd446ab2fd98..f4ffd91901f8 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2809,7 +2810,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [PPSS_PROC_RESET] = { 0x2594, 1 }, [PPSS_RESET] = { 0x2594}, [DMA_BAM_RESET] = { 0x25c0, 7 }, - [SIC_TIC_RESET] = { 0x2600, 7 }, + [SPS_TIC_H_RESET] = { 0x2600, 7 }, [SLIMBUS_H_RESET] = { 0x2620, 7 }, [SFAB_CFPB_M_RESET] = { 0x2680, 7 }, [SFAB_CFPB_S_RESET] = { 0x26c0, 7 }, @@ -2822,7 +2823,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [SFAB_SFPB_M_RESET] = { 0x2780, 7 }, [SFAB_SFPB_S_RESET] = { 0x27a0, 7 }, [RPM_PROC_RESET] = { 0x27c0, 7 }, - [PMIC_SSBI2_RESET] = { 0x270c, 12 }, + [PMIC_SSBI2_RESET] = { 0x280c, 12 }, [SDC1_RESET] = { 0x2830 }, [SDC2_RESET] = { 0x2850 }, [SDC3_RESET] = { 0x2870 }, @@ -2867,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = { [RIVA_RESET] = { 0x35e0 }, }; +static struct clk_regmap *gcc_apq8064_clks[] = { + [PLL8] = &pll8.clkr, + [PLL8_VOTE] = &pll8_vote, + [GSBI7_UART_SRC] = &gsbi7_uart_src.clkr, + [GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr, + [GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr, + [GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr, + [GSBI7_H_CLK] = &gsbi7_h_clk.clkr, +}; + static const struct regmap_config gcc_msm8960_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -2875,51 +2886,38 @@ static const struct regmap_config gcc_msm8960_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8960_desc = { + .config = &gcc_msm8960_regmap_config, + .clks = gcc_msm8960_clks, + .num_clks = ARRAY_SIZE(gcc_msm8960_clks), + .resets = gcc_msm8960_resets, + .num_resets = ARRAY_SIZE(gcc_msm8960_resets), +}; + +static const struct qcom_cc_desc gcc_apq8064_desc = { + .config = &gcc_msm8960_regmap_config, + .clks = gcc_apq8064_clks, + .num_clks = ARRAY_SIZE(gcc_apq8064_clks), + .resets = gcc_msm8960_resets, + .num_resets = ARRAY_SIZE(gcc_msm8960_resets), +}; + static const struct of_device_id gcc_msm8960_match_table[] = { - { .compatible = "qcom,gcc-msm8960" }, + { .compatible = "qcom,gcc-msm8960", .data = &gcc_msm8960_desc }, + { .compatible = "qcom,gcc-apq8064", .data = &gcc_apq8064_desc }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int gcc_msm8960_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8960_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8960_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + + match = of_match_device(gcc_msm8960_match_table, &pdev->dev); + if (!match) + return -EINVAL; /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); @@ -2930,39 +2928,12 @@ static int gcc_msm8960_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8960_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8960_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8960_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8960_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, match->data); } static int gcc_msm8960_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c index 51d457e2b959..7af7c18d2144 100644 --- a/drivers/clk/qcom/gcc-msm8974.c +++ b/drivers/clk/qcom/gcc-msm8974.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -34,6 +35,7 @@ #define P_XO 0 #define P_GPLL0 1 #define P_GPLL1 1 +#define P_GPLL4 2 static const u8 gcc_xo_gpll0_map[] = { [P_XO] = 0, @@ -45,6 +47,18 @@ static const char *gcc_xo_gpll0[] = { "gpll0_vote", }; +static const u8 gcc_xo_gpll0_gpll4_map[] = { + [P_XO] = 0, + [P_GPLL0] = 1, + [P_GPLL4] = 5, +}; + +static const char *gcc_xo_gpll0_gpll4[] = { + "xo", + "gpll0_vote", + "gpll4_vote", +}; + #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } static struct clk_pll gpll0 = { @@ -137,6 +151,33 @@ static struct clk_regmap gpll1_vote = { }, }; +static struct clk_pll gpll4 = { + .l_reg = 0x1dc4, + .m_reg = 0x1dc8, + .n_reg = 0x1dcc, + .config_reg = 0x1dd4, + .mode_reg = 0x1dc0, + .status_reg = 0x1ddc, + .status_bit = 17, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll4", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap gpll4_vote = { + .enable_reg = 0x1480, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gpll4_vote", + .parent_names = (const char *[]){ "gpll4" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + static const struct freq_tbl ftbl_gcc_usb30_master_clk[] = { F(125000000, P_GPLL0, 1, 5, 24), { } @@ -811,18 +852,33 @@ static const struct freq_tbl ftbl_gcc_sdcc1_4_apps_clk[] = { { } }; +static const struct freq_tbl ftbl_gcc_sdcc1_apps_clk_pro[] = { + F(144000, P_XO, 16, 3, 25), + F(400000, P_XO, 12, 1, 4), + F(20000000, P_GPLL0, 15, 1, 2), + F(25000000, P_GPLL0, 12, 1, 2), + F(50000000, P_GPLL0, 12, 0, 0), + F(100000000, P_GPLL0, 6, 0, 0), + F(192000000, P_GPLL4, 4, 0, 0), + F(200000000, P_GPLL0, 3, 0, 0), + F(384000000, P_GPLL4, 2, 0, 0), + { } +}; + +static struct clk_init_data sdcc1_apps_clk_src_init = { + .name = "sdcc1_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, +}; + static struct clk_rcg2 sdcc1_apps_clk_src = { .cmd_rcgr = 0x04d0, .mnd_width = 8, .hid_width = 5, .parent_map = gcc_xo_gpll0_map, .freq_tbl = ftbl_gcc_sdcc1_4_apps_clk, - .clkr.hw.init = &(struct clk_init_data){ - .name = "sdcc1_apps_clk_src", - .parent_names = gcc_xo_gpll0, - .num_parents = 2, - .ops = &clk_rcg2_ops, - }, + .clkr.hw.init = &sdcc1_apps_clk_src_init, }; static struct clk_rcg2 sdcc2_apps_clk_src = { @@ -1340,7 +1396,7 @@ static struct clk_branch gcc_blsp1_uart6_apps_clk = { }; static struct clk_branch gcc_blsp2_ahb_clk = { - .halt_reg = 0x05c4, + .halt_reg = 0x0944, .halt_check = BRANCH_HALT_VOTED, .clkr = { .enable_reg = 0x1484, @@ -1994,6 +2050,38 @@ static struct clk_branch gcc_sdcc1_apps_clk = { }, }; +static struct clk_branch gcc_sdcc1_cdccal_ff_clk = { + .halt_reg = 0x04e8, + .clkr = { + .enable_reg = 0x04e8, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_cdccal_ff_clk", + .parent_names = (const char *[]){ + "xo" + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc1_cdccal_sleep_clk = { + .halt_reg = 0x04e4, + .clkr = { + .enable_reg = 0x04e4, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_cdccal_sleep_clk", + .parent_names = (const char *[]){ + "sleep_clk_src" + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_sdcc2_ahb_clk = { .halt_reg = 0x0508, .clkr = { @@ -2483,6 +2571,10 @@ static struct clk_regmap *gcc_msm8974_clocks[] = { [GCC_USB_HSIC_IO_CAL_SLEEP_CLK] = &gcc_usb_hsic_io_cal_sleep_clk.clkr, [GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr, [GCC_MMSS_GPLL0_CLK_SRC] = &gcc_mmss_gpll0_clk_src, + [GPLL4] = NULL, + [GPLL4_VOTE] = NULL, + [GCC_SDCC1_CDCCAL_SLEEP_CLK] = NULL, + [GCC_SDCC1_CDCCAL_FF_CLK] = NULL, }; static const struct qcom_reset_map gcc_msm8974_resets[] = { @@ -2574,51 +2666,51 @@ static const struct regmap_config gcc_msm8974_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc gcc_msm8974_desc = { + .config = &gcc_msm8974_regmap_config, + .clks = gcc_msm8974_clocks, + .num_clks = ARRAY_SIZE(gcc_msm8974_clocks), + .resets = gcc_msm8974_resets, + .num_resets = ARRAY_SIZE(gcc_msm8974_resets), +}; + static const struct of_device_id gcc_msm8974_match_table[] = { { .compatible = "qcom,gcc-msm8974" }, + { .compatible = "qcom,gcc-msm8974pro" , .data = (void *)1UL }, + { .compatible = "qcom,gcc-msm8974pro-ac", .data = (void *)1UL }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; +static void msm8974_pro_clock_override(void) +{ + sdcc1_apps_clk_src_init.parent_names = gcc_xo_gpll0_gpll4; + sdcc1_apps_clk_src_init.num_parents = 3; + sdcc1_apps_clk_src.freq_tbl = ftbl_gcc_sdcc1_apps_clk_pro; + sdcc1_apps_clk_src.parent_map = gcc_xo_gpll0_gpll4_map; + + gcc_msm8974_clocks[GPLL4] = &gpll4.clkr; + gcc_msm8974_clocks[GPLL4_VOTE] = &gpll4_vote; + gcc_msm8974_clocks[GCC_SDCC1_CDCCAL_SLEEP_CLK] = + &gcc_sdcc1_cdccal_sleep_clk.clkr; + gcc_msm8974_clocks[GCC_SDCC1_CDCCAL_FF_CLK] = + &gcc_sdcc1_cdccal_ff_clk.clkr; +} static int gcc_msm8974_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8974_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(gcc_msm8974_clocks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; + struct device *dev = &pdev->dev; + bool pro; + const struct of_device_id *id; + + id = of_match_device(gcc_msm8974_match_table, dev); + if (!id) + return -ENODEV; + pro = !!(id->data); + + if (pro) + msm8974_pro_clock_override(); /* Temporary until RPM clocks supported */ clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); @@ -2631,39 +2723,12 @@ static int gcc_msm8974_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - for (i = 0; i < num_clks; i++) { - if (!gcc_msm8974_clocks[i]) - continue; - clk = devm_clk_register_regmap(dev, gcc_msm8974_clocks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8974_resets), - reset->regmap = regmap; - reset->reset_map = gcc_msm8974_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &gcc_msm8974_desc); } static int gcc_msm8974_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index f9b59c7e48e9..12f3c0b64fcd 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -26,6 +26,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/reset/qcom,mmcc-msm8960.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_msm8960_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc mmcc_msm8960_desc = { + .config = &mmcc_msm8960_regmap_config, + .clks = mmcc_msm8960_clks, + .num_clks = ARRAY_SIZE(mmcc_msm8960_clks), + .resets = mmcc_msm8960_resets, + .num_resets = ARRAY_SIZE(mmcc_msm8960_resets), +}; + static const struct of_device_id mmcc_msm8960_match_table[] = { { .compatible = "qcom,mmcc-msm8960" }, { } }; MODULE_DEVICE_TABLE(of, mmcc_msm8960_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int mmcc_msm8960_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; - struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; - struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8960_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(mmcc_msm8960_clks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; - - for (i = 0; i < num_clks; i++) { - if (!mmcc_msm8960_clks[i]) - continue; - clk = devm_clk_register_regmap(dev, mmcc_msm8960_clks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); - if (ret) - return ret; - - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8960_resets), - reset->regmap = regmap; - reset->reset_map = mmcc_msm8960_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); - - return ret; + return qcom_cc_probe(pdev, &mmcc_msm8960_desc); } static int mmcc_msm8960_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index c95774514b81..c65b90515872 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -25,6 +25,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/reset/qcom,mmcc-msm8974.h> +#include "common.h" #include "clk-regmap.h" #include "clk-pll.h" #include "clk-rcg.h" @@ -40,9 +41,11 @@ #define P_EDPVCO 3 #define P_GPLL1 4 #define P_DSI0PLL 4 +#define P_DSI0PLL_BYTE 4 #define P_MMPLL2 4 #define P_MMPLL3 4 #define P_DSI1PLL 5 +#define P_DSI1PLL_BYTE 5 static const u8 mmcc_xo_mmpll0_mmpll1_gpll0_map[] = { [P_XO] = 0, @@ -160,6 +163,24 @@ static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = { "dsi1pll", }; +static const u8 mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = { + [P_XO] = 0, + [P_EDPLINK] = 4, + [P_HDMIPLL] = 3, + [P_GPLL0] = 5, + [P_DSI0PLL_BYTE] = 1, + [P_DSI1PLL_BYTE] = 2, +}; + +static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = { + "xo", + "edp_link_clk", + "hdmipll", + "gpll0_vote", + "dsi0pllbyte", + "dsi1pllbyte", +}; + #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } static struct clk_pll mmpll0 = { @@ -169,6 +190,7 @@ static struct clk_pll mmpll0 = { .config_reg = 0x0014, .mode_reg = 0x0000, .status_reg = 0x001c, + .status_bit = 17, .clkr.hw.init = &(struct clk_init_data){ .name = "mmpll0", .parent_names = (const char *[]){ "xo" }, @@ -192,9 +214,10 @@ static struct clk_pll mmpll1 = { .l_reg = 0x0044, .m_reg = 0x0048, .n_reg = 0x004c, - .config_reg = 0x0054, + .config_reg = 0x0050, .mode_reg = 0x0040, .status_reg = 0x005c, + .status_bit = 17, .clkr.hw.init = &(struct clk_init_data){ .name = "mmpll1", .parent_names = (const char *[]){ "xo" }, @@ -218,7 +241,7 @@ static struct clk_pll mmpll2 = { .l_reg = 0x4104, .m_reg = 0x4108, .n_reg = 0x410c, - .config_reg = 0x4114, + .config_reg = 0x4110, .mode_reg = 0x4100, .status_reg = 0x411c, .clkr.hw.init = &(struct clk_init_data){ @@ -233,9 +256,10 @@ static struct clk_pll mmpll3 = { .l_reg = 0x0084, .m_reg = 0x0088, .n_reg = 0x008c, - .config_reg = 0x0094, + .config_reg = 0x0090, .mode_reg = 0x0080, .status_reg = 0x009c, + .status_bit = 17, .clkr.hw.init = &(struct clk_init_data){ .name = "mmpll3", .parent_names = (const char *[]){ "xo" }, @@ -496,15 +520,8 @@ static struct clk_rcg2 jpeg2_clk_src = { }, }; -static struct freq_tbl ftbl_mdss_pclk0_clk[] = { - F(125000000, P_DSI0PLL, 2, 0, 0), - F(250000000, P_DSI0PLL, 1, 0, 0), - { } -}; - -static struct freq_tbl ftbl_mdss_pclk1_clk[] = { - F(125000000, P_DSI1PLL, 2, 0, 0), - F(250000000, P_DSI1PLL, 1, 0, 0), +static struct freq_tbl pixel_freq_tbl[] = { + { .src = P_DSI0PLL }, { } }; @@ -513,12 +530,13 @@ static struct clk_rcg2 pclk0_clk_src = { .mnd_width = 8, .hid_width = 5, .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, - .freq_tbl = ftbl_mdss_pclk0_clk, + .freq_tbl = pixel_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "pclk0_clk_src", .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_pixel_ops, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -527,12 +545,13 @@ static struct clk_rcg2 pclk1_clk_src = { .mnd_width = 8, .hid_width = 5, .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, - .freq_tbl = ftbl_mdss_pclk1_clk, + .freq_tbl = pixel_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "pclk1_clk_src", .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_pixel_ops, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -750,41 +769,36 @@ static struct clk_rcg2 cpp_clk_src = { }, }; -static struct freq_tbl ftbl_mdss_byte0_clk[] = { - F(93750000, P_DSI0PLL, 8, 0, 0), - F(187500000, P_DSI0PLL, 4, 0, 0), - { } -}; - -static struct freq_tbl ftbl_mdss_byte1_clk[] = { - F(93750000, P_DSI1PLL, 8, 0, 0), - F(187500000, P_DSI1PLL, 4, 0, 0), +static struct freq_tbl byte_freq_tbl[] = { + { .src = P_DSI0PLL_BYTE }, { } }; static struct clk_rcg2 byte0_clk_src = { .cmd_rcgr = 0x2120, .hid_width = 5, - .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, - .freq_tbl = ftbl_mdss_byte0_clk, + .parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map, + .freq_tbl = byte_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "byte0_clk_src", - .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, + .parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_byte_ops, + .flags = CLK_SET_RATE_PARENT, }, }; static struct clk_rcg2 byte1_clk_src = { .cmd_rcgr = 0x2140, .hid_width = 5, - .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, - .freq_tbl = ftbl_mdss_byte1_clk, + .parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map, + .freq_tbl = byte_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "byte1_clk_src", - .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, + .parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_byte_ops, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -822,12 +836,12 @@ static struct clk_rcg2 edplink_clk_src = { .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, .num_parents = 6, .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, }, }; -static struct freq_tbl ftbl_mdss_edppixel_clk[] = { - F(175000000, P_EDPVCO, 2, 0, 0), - F(350000000, P_EDPVCO, 11, 0, 0), +static struct freq_tbl edp_pixel_freq_tbl[] = { + { .src = P_EDPVCO }, { } }; @@ -836,12 +850,12 @@ static struct clk_rcg2 edppixel_clk_src = { .mnd_width = 8, .hid_width = 5, .parent_map = mmcc_xo_dsi_hdmi_edp_map, - .freq_tbl = ftbl_mdss_edppixel_clk, + .freq_tbl = edp_pixel_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "edppixel_clk_src", .parent_names = mmcc_xo_dsi_hdmi_edp, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_edp_pixel_ops, }, }; @@ -853,11 +867,11 @@ static struct freq_tbl ftbl_mdss_esc0_1_clk[] = { static struct clk_rcg2 esc0_clk_src = { .cmd_rcgr = 0x2160, .hid_width = 5, - .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, + .parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map, .freq_tbl = ftbl_mdss_esc0_1_clk, .clkr.hw.init = &(struct clk_init_data){ .name = "esc0_clk_src", - .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, + .parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0, .num_parents = 6, .ops = &clk_rcg2_ops, }, @@ -866,26 +880,18 @@ static struct clk_rcg2 esc0_clk_src = { static struct clk_rcg2 esc1_clk_src = { .cmd_rcgr = 0x2180, .hid_width = 5, - .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, + .parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map, .freq_tbl = ftbl_mdss_esc0_1_clk, .clkr.hw.init = &(struct clk_init_data){ .name = "esc1_clk_src", - .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, + .parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0, .num_parents = 6, .ops = &clk_rcg2_ops, }, }; -static struct freq_tbl ftbl_mdss_extpclk_clk[] = { - F(25200000, P_HDMIPLL, 1, 0, 0), - F(27000000, P_HDMIPLL, 1, 0, 0), - F(27030000, P_HDMIPLL, 1, 0, 0), - F(65000000, P_HDMIPLL, 1, 0, 0), - F(74250000, P_HDMIPLL, 1, 0, 0), - F(108000000, P_HDMIPLL, 1, 0, 0), - F(148500000, P_HDMIPLL, 1, 0, 0), - F(268500000, P_HDMIPLL, 1, 0, 0), - F(297000000, P_HDMIPLL, 1, 0, 0), +static struct freq_tbl extpclk_freq_tbl[] = { + { .src = P_HDMIPLL }, { } }; @@ -893,12 +899,13 @@ static struct clk_rcg2 extpclk_clk_src = { .cmd_rcgr = 0x2060, .hid_width = 5, .parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map, - .freq_tbl = ftbl_mdss_extpclk_clk, + .freq_tbl = extpclk_freq_tbl, .clkr.hw.init = &(struct clk_init_data){ .name = "extpclk_clk_src", .parent_names = mmcc_xo_dsi_hdmi_edp_gpll0, .num_parents = 6, - .ops = &clk_rcg2_ops, + .ops = &clk_byte_ops, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -2318,7 +2325,7 @@ static const struct pll_config mmpll1_config = { .vco_val = 0x0, .vco_mask = 0x3 << 20, .pre_div_val = 0x0, - .pre_div_mask = 0x3 << 12, + .pre_div_mask = 0x7 << 12, .post_div_val = 0x0, .post_div_mask = 0x3 << 8, .mn_ena_mask = BIT(24), @@ -2332,7 +2339,7 @@ static struct pll_config mmpll3_config = { .vco_val = 0x0, .vco_mask = 0x3 << 20, .pre_div_val = 0x0, - .pre_div_mask = 0x3 << 12, + .pre_div_mask = 0x7 << 12, .post_div_val = 0x0, .post_div_mask = 0x3 << 8, .mn_ena_mask = BIT(24), @@ -2524,88 +2531,39 @@ static const struct regmap_config mmcc_msm8974_regmap_config = { .fast_io = true, }; +static const struct qcom_cc_desc mmcc_msm8974_desc = { + .config = &mmcc_msm8974_regmap_config, + .clks = mmcc_msm8974_clocks, + .num_clks = ARRAY_SIZE(mmcc_msm8974_clocks), + .resets = mmcc_msm8974_resets, + .num_resets = ARRAY_SIZE(mmcc_msm8974_resets), +}; + static const struct of_device_id mmcc_msm8974_match_table[] = { { .compatible = "qcom,mmcc-msm8974" }, { } }; MODULE_DEVICE_TABLE(of, mmcc_msm8974_match_table); -struct qcom_cc { - struct qcom_reset_controller reset; - struct clk_onecell_data data; - struct clk *clks[]; -}; - static int mmcc_msm8974_probe(struct platform_device *pdev) { - void __iomem *base; - struct resource *res; - int i, ret; - struct device *dev = &pdev->dev; - struct clk *clk; - struct clk_onecell_data *data; - struct clk **clks; + int ret; struct regmap *regmap; - size_t num_clks; - struct qcom_reset_controller *reset; - struct qcom_cc *cc; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8974_regmap_config); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); - - num_clks = ARRAY_SIZE(mmcc_msm8974_clocks); - cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks, - GFP_KERNEL); - if (!cc) - return -ENOMEM; - - clks = cc->clks; - data = &cc->data; - data->clks = clks; - data->clk_num = num_clks; - - clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true); - clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false); - - for (i = 0; i < num_clks; i++) { - if (!mmcc_msm8974_clocks[i]) - continue; - clk = devm_clk_register_regmap(dev, mmcc_msm8974_clocks[i]); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clks[i] = clk; - } - ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data); + ret = qcom_cc_probe(pdev, &mmcc_msm8974_desc); if (ret) return ret; - reset = &cc->reset; - reset->rcdev.of_node = dev->of_node; - reset->rcdev.ops = &qcom_reset_ops, - reset->rcdev.owner = THIS_MODULE, - reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8974_resets), - reset->regmap = regmap; - reset->reset_map = mmcc_msm8974_resets, - platform_set_drvdata(pdev, &reset->rcdev); - - ret = reset_controller_register(&reset->rcdev); - if (ret) - of_clk_del_provider(dev->of_node); + regmap = dev_get_regmap(&pdev->dev, NULL); + clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true); + clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false); - return ret; + return 0; } static int mmcc_msm8974_remove(struct platform_device *pdev) { - of_clk_del_provider(pdev->dev.of_node); - reset_controller_unregister(platform_get_drvdata(pdev)); + qcom_cc_remove(pdev); return 0; } diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index c4df294bb7fb..4f150c9dd38c 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -324,7 +324,7 @@ static struct syscore_ops exynos4_clk_syscore_ops = { .resume = exynos4_clk_resume, }; -static void exynos4_clk_sleep_init(void) +static void __init exynos4_clk_sleep_init(void) { exynos4_save_common = samsung_clk_alloc_reg_dump(exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs)); @@ -359,7 +359,7 @@ err_warn: __func__); } #else -static void exynos4_clk_sleep_init(void) {} +static void __init exynos4_clk_sleep_init(void) {} #endif /* list of all parent clock list */ diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile index 5404cb931ebf..e0029237827a 100644 --- a/drivers/clk/shmobile/Makefile +++ b/drivers/clk/shmobile/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o +obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o +obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c index 1f6324e29a80..2d2fe773ac81 100644 --- a/drivers/clk/shmobile/clk-mstp.c +++ b/drivers/clk/shmobile/clk-mstp.c @@ -112,7 +112,7 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw) else value = clk_readl(group->smstpcr); - return !!(value & BIT(clock->bit_index)); + return !(value & BIT(clock->bit_index)); } static const struct clk_ops cpg_mstp_clock_ops = { diff --git a/drivers/clk/shmobile/clk-r8a7740.c b/drivers/clk/shmobile/clk-r8a7740.c new file mode 100644 index 000000000000..1e2eaae21e01 --- /dev/null +++ b/drivers/clk/shmobile/clk-r8a7740.c @@ -0,0 +1,199 @@ +/* + * r8a7740 Core CPG Clocks + * + * Copyright (C) 2014 Ulrich Hecht + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +struct r8a7740_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +#define CPG_FRQCRA 0x00 +#define CPG_FRQCRB 0x04 +#define CPG_PLLC2CR 0x2c +#define CPG_USBCKCR 0x8c +#define CPG_FRQCRC 0xe0 + +#define CLK_ENABLE_ON_INIT BIT(0) + +struct div4_clk { + const char *name; + unsigned int reg; + unsigned int shift; + int flags; +}; + +static struct div4_clk div4_clks[] = { + { "i", CPG_FRQCRA, 20, CLK_ENABLE_ON_INIT }, + { "zg", CPG_FRQCRA, 16, CLK_ENABLE_ON_INIT }, + { "b", CPG_FRQCRA, 8, CLK_ENABLE_ON_INIT }, + { "m1", CPG_FRQCRA, 4, CLK_ENABLE_ON_INIT }, + { "hp", CPG_FRQCRB, 4, 0 }, + { "hpp", CPG_FRQCRC, 20, 0 }, + { "usbp", CPG_FRQCRC, 16, 0 }, + { "s", CPG_FRQCRC, 12, 0 }, + { "zb", CPG_FRQCRC, 8, 0 }, + { "m3", CPG_FRQCRC, 4, 0 }, + { "cp", CPG_FRQCRC, 0, 0 }, + { NULL, 0, 0, 0 }, +}; + +static const struct clk_div_table div4_div_table[] = { + { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 }, + { 6, 16 }, { 7, 18 }, { 8, 24 }, { 9, 32 }, { 10, 36 }, { 11, 48 }, + { 13, 72 }, { 14, 96 }, { 0, 0 } +}; + +static u32 cpg_mode __initdata; + +static struct clk * __init +r8a7740_cpg_register_clock(struct device_node *np, struct r8a7740_cpg *cpg, + const char *name) +{ + const struct clk_div_table *table = NULL; + const char *parent_name; + unsigned int shift, reg; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "r")) { + switch (cpg_mode & (BIT(2) | BIT(1))) { + case BIT(1) | BIT(2): + /* extal1 */ + parent_name = of_clk_get_parent_name(np, 0); + div = 2048; + break; + case BIT(2): + /* extal1 */ + parent_name = of_clk_get_parent_name(np, 0); + div = 1024; + break; + default: + /* extalr */ + parent_name = of_clk_get_parent_name(np, 2); + break; + } + } else if (!strcmp(name, "system")) { + parent_name = of_clk_get_parent_name(np, 0); + if (cpg_mode & BIT(1)) + div = 2; + } else if (!strcmp(name, "pllc0")) { + /* PLLC0/1 are configurable multiplier clocks. Register them as + * fixed factor clocks for now as there's no generic multiplier + * clock implementation and we currently have no need to change + * the multiplier value. + */ + u32 value = clk_readl(cpg->reg + CPG_FRQCRC); + parent_name = "system"; + mult = ((value >> 24) & 0x7f) + 1; + } else if (!strcmp(name, "pllc1")) { + u32 value = clk_readl(cpg->reg + CPG_FRQCRA); + parent_name = "system"; + mult = ((value >> 24) & 0x7f) + 1; + div = 2; + } else if (!strcmp(name, "pllc2")) { + u32 value = clk_readl(cpg->reg + CPG_PLLC2CR); + parent_name = "system"; + mult = ((value >> 24) & 0x3f) + 1; + } else if (!strcmp(name, "usb24s")) { + u32 value = clk_readl(cpg->reg + CPG_USBCKCR); + if (value & BIT(7)) + /* extal2 */ + parent_name = of_clk_get_parent_name(np, 1); + else + parent_name = "system"; + if (!(value & BIT(6))) + div = 2; + } else { + struct div4_clk *c; + for (c = div4_clks; c->name; c++) { + if (!strcmp(name, c->name)) { + parent_name = "pllc1"; + table = div4_div_table; + reg = c->reg; + shift = c->shift; + break; + } + } + if (!c->name) + return ERR_PTR(-EINVAL); + } + + if (!table) { + return clk_register_fixed_factor(NULL, name, parent_name, 0, + mult, div); + } else { + return clk_register_divider_table(NULL, name, parent_name, 0, + cpg->reg + reg, shift, 4, 0, + table, &cpg->lock); + } +} + +static void __init r8a7740_cpg_clocks_init(struct device_node *np) +{ + struct r8a7740_cpg *cpg; + struct clk **clks; + unsigned int i; + int num_clks; + + if (of_property_read_u32(np, "renesas,mode", &cpg_mode)) + pr_warn("%s: missing renesas,mode property\n", __func__); + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + cpg->reg = of_iomap(np, 0); + if (WARN_ON(cpg->reg == NULL)) + return; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = r8a7740_cpg_register_clock(np, cpg, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(r8a7740_cpg_clks, "renesas,r8a7740-cpg-clocks", + r8a7740_cpg_clocks_init); diff --git a/drivers/clk/shmobile/clk-r8a7779.c b/drivers/clk/shmobile/clk-r8a7779.c new file mode 100644 index 000000000000..652ecacb6daf --- /dev/null +++ b/drivers/clk/shmobile/clk-r8a7779.c @@ -0,0 +1,180 @@ +/* + * r8a7779 Core CPG Clocks + * + * Copyright (C) 2013, 2014 Horms Solutions Ltd. + * + * Contact: Simon Horman <horms@verge.net.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +#include <dt-bindings/clock/r8a7779-clock.h> + +#define CPG_NUM_CLOCKS (R8A7779_CLK_OUT + 1) + +struct r8a7779_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +/* ----------------------------------------------------------------------------- + * CPG Clock Data + */ + +/* + * MD1 = 1 MD1 = 0 + * (PLLA = 1500) (PLLA = 1600) + * (MHz) (MHz) + *------------------------------------------------+-------------------- + * clkz 1000 (2/3) 800 (1/2) + * clkzs 250 (1/6) 200 (1/8) + * clki 750 (1/2) 800 (1/2) + * clks 250 (1/6) 200 (1/8) + * clks1 125 (1/12) 100 (1/16) + * clks3 187.5 (1/8) 200 (1/8) + * clks4 93.7 (1/16) 100 (1/16) + * clkp 62.5 (1/24) 50 (1/32) + * clkg 62.5 (1/24) 66.6 (1/24) + * clkb, CLKOUT + * (MD2 = 0) 62.5 (1/24) 66.6 (1/24) + * (MD2 = 1) 41.6 (1/36) 50 (1/32) + */ + +#define CPG_CLK_CONFIG_INDEX(md) (((md) & (BIT(2)|BIT(1))) >> 1) + +struct cpg_clk_config { + unsigned int z_mult; + unsigned int z_div; + unsigned int zs_and_s_div; + unsigned int s1_div; + unsigned int p_div; + unsigned int b_and_out_div; +}; + +static const struct cpg_clk_config cpg_clk_configs[4] __initconst = { + { 1, 2, 8, 16, 32, 24 }, + { 2, 3, 6, 12, 24, 24 }, + { 1, 2, 8, 16, 32, 32 }, + { 2, 3, 6, 12, 24, 36 }, +}; + +/* + * MD PLLA Ratio + * 12 11 + *------------------------ + * 0 0 x42 + * 0 1 x48 + * 1 0 x56 + * 1 1 x64 + */ + +#define CPG_PLLA_MULT_INDEX(md) (((md) & (BIT(12)|BIT(11))) >> 11) + +static const unsigned int cpg_plla_mult[4] __initconst = { 42, 48, 56, 64 }; + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +static u32 cpg_mode __initdata; + +static struct clk * __init +r8a7779_cpg_register_clock(struct device_node *np, struct r8a7779_cpg *cpg, + const struct cpg_clk_config *config, + unsigned int plla_mult, const char *name) +{ + const char *parent_name = "plla"; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "plla")) { + parent_name = of_clk_get_parent_name(np, 0); + mult = plla_mult; + } else if (!strcmp(name, "z")) { + div = config->z_div; + mult = config->z_mult; + } else if (!strcmp(name, "zs") || !strcmp(name, "s")) { + div = config->zs_and_s_div; + } else if (!strcmp(name, "s1")) { + div = config->s1_div; + } else if (!strcmp(name, "p")) { + div = config->p_div; + } else if (!strcmp(name, "b") || !strcmp(name, "out")) { + div = config->b_and_out_div; + } else { + return ERR_PTR(-EINVAL); + } + + return clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div); +} + +static void __init r8a7779_cpg_clocks_init(struct device_node *np) +{ + const struct cpg_clk_config *config; + struct r8a7779_cpg *cpg; + struct clk **clks; + unsigned int i, plla_mult; + int num_clks; + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(CPG_NUM_CLOCKS * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + config = &cpg_clk_configs[CPG_CLK_CONFIG_INDEX(cpg_mode)]; + plla_mult = cpg_plla_mult[CPG_PLLA_MULT_INDEX(cpg_mode)]; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = r8a7779_cpg_register_clock(np, cpg, config, + plla_mult, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(r8a7779_cpg_clks, "renesas,r8a7779-cpg-clocks", + r8a7779_cpg_clocks_init); + +void __init r8a7779_clocks_init(u32 mode) +{ + cpg_mode = mode; + + of_clk_init(NULL); +} diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c index 501d513bf890..dd3a78c64795 100644 --- a/drivers/clk/socfpga/clk-gate.c +++ b/drivers/clk/socfpga/clk-gate.c @@ -32,7 +32,6 @@ #define SOCFPGA_MMC_CLK "sdmmc_clk" #define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8 -#define div_mask(width) ((1 << (width)) - 1) #define streq(a, b) (strcmp((a), (b)) == 0) #define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw) diff --git a/drivers/clk/socfpga/clk-periph.c b/drivers/clk/socfpga/clk-periph.c index 81623a3736f9..46531c34ec9b 100644 --- a/drivers/clk/socfpga/clk-periph.c +++ b/drivers/clk/socfpga/clk-periph.c @@ -29,12 +29,18 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk, unsigned long parent_rate) { struct socfpga_periph_clk *socfpgaclk = to_socfpga_periph_clk(hwclk); - u32 div; + u32 div, val; - if (socfpgaclk->fixed_div) + if (socfpgaclk->fixed_div) { div = socfpgaclk->fixed_div; - else + } else { + if (socfpgaclk->div_reg) { + val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift; + val &= div_mask(socfpgaclk->width); + parent_rate /= (val + 1); + } div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1); + } return parent_rate / div; } @@ -54,6 +60,7 @@ static __init void __socfpga_periph_init(struct device_node *node, struct clk_init_data init; int rc; u32 fixed_div; + u32 div_reg[3]; of_property_read_u32(node, "reg", ®); @@ -63,6 +70,15 @@ static __init void __socfpga_periph_init(struct device_node *node, periph_clk->hw.reg = clk_mgr_base_addr + reg; + rc = of_property_read_u32_array(node, "div-reg", div_reg, 3); + if (!rc) { + periph_clk->div_reg = clk_mgr_base_addr + div_reg[0]; + periph_clk->shift = div_reg[1]; + periph_clk->width = div_reg[2]; + } else { + periph_clk->div_reg = 0; + } + rc = of_property_read_u32(node, "fixed-divider", &fixed_div); if (rc) periph_clk->fixed_div = 0; diff --git a/drivers/clk/socfpga/clk.h b/drivers/clk/socfpga/clk.h index d2e54019c94f..d291f60c46e1 100644 --- a/drivers/clk/socfpga/clk.h +++ b/drivers/clk/socfpga/clk.h @@ -27,6 +27,7 @@ #define CLKMGR_PERPLL_SRC 0xAC #define SOCFPGA_MAX_PARENTS 3 +#define div_mask(width) ((1 << (width)) - 1) extern void __iomem *clk_mgr_base_addr; @@ -52,6 +53,9 @@ struct socfpga_periph_clk { struct clk_gate hw; char *parent_name; u32 fixed_div; + void __iomem *div_reg; + u32 width; /* only valid if div_reg != 0 */ + u32 shift; /* only valid if div_reg != 0 */ }; #endif /* SOCFPGA_CLK_H */ diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c index a886702f7c8b..d8b9b1a2aeda 100644 --- a/drivers/clk/st/clkgen-pll.c +++ b/drivers/clk/st/clkgen-pll.c @@ -655,6 +655,7 @@ static struct of_device_id c32_gpu_pll_of_match[] = { .compatible = "st,stih416-gpu-pll-c32", .data = &st_pll1200c32_gpu_416, }, + {} }; static void __init clkgengpu_c32_pll_setup(struct device_node *np) diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 9e232644f07e..3806d97e529b 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, return rate; } +static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_p) +{ + struct clk *clk = hw->clk, *parent, *best_parent = NULL; + int i, num_parents; + unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; + + /* find the parent that can help provide the fastest rate <= rate */ + num_parents = __clk_get_num_parents(clk); + for (i = 0; i < num_parents; i++) { + parent = clk_get_parent_by_index(clk, i); + if (!parent) + continue; + if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) + parent_rate = __clk_round_rate(parent, rate); + else + parent_rate = __clk_get_rate(parent); + + child_rate = clk_factors_round_rate(hw, rate, &parent_rate); + + if (child_rate <= rate && child_rate > best_child_rate) { + best_parent = parent; + best = parent_rate; + best_child_rate = child_rate; + } + } + + if (best_parent) + *best_parent_p = best_parent; + *best_parent_rate = best; + + return best_child_rate; +} + static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, } const struct clk_ops clk_factors_ops = { + .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 9eddf22d56a4..426483422d3d 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -507,6 +507,43 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", /** + * clk_sunxi_mmc_phase_control() - configures MMC clock phase control + */ + +void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output) +{ + #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) + #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) + + struct clk_hw *hw = __clk_get_hw(clk); + struct clk_composite *composite = to_clk_composite(hw); + struct clk_hw *rate_hw = composite->rate_hw; + struct clk_factors *factors = to_clk_factors(rate_hw); + unsigned long flags = 0; + u32 reg; + + if (factors->lock) + spin_lock_irqsave(factors->lock, flags); + + reg = readl(factors->reg); + + /* set sample clock phase control */ + reg &= ~(0x7 << 20); + reg |= ((sample & 0x7) << 20); + + /* set output clock phase control */ + reg &= ~(0x7 << 8); + reg |= ((output & 0x7) << 8); + + writel(reg, factors->reg); + + if (factors->lock) + spin_unlock_irqrestore(factors->lock, flags); +} +EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); + + +/** * sunxi_factors_clk_setup() - Setup function for factor clocks */ diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h index c39613c519af..0011d547a9f7 100644 --- a/drivers/clk/tegra/clk-id.h +++ b/drivers/clk/tegra/clk-id.h @@ -233,6 +233,7 @@ enum clk_id { tegra_clk_xusb_hs_src, tegra_clk_xusb_ss, tegra_clk_xusb_ss_src, + tegra_clk_xusb_ss_div2, tegra_clk_max, }; diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 6aad8abc69a2..637b62ccc91e 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -96,10 +96,20 @@ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL) #define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_USE_LOCKDET BIT(3) #define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SS_SWCTL BIT(6) #define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_SEQ_START_STATE BIT(25) #define PLLE_AUX_PLLRE_SEL BIT(28) +#define XUSBIO_PLL_CFG0 0x51c +#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) +#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6) +#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24) +#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25) + #define PLLE_MISC_PLLE_PTS BIT(8) #define PLLE_MISC_IDDQ_SW_VALUE BIT(13) #define PLLE_MISC_IDDQ_SW_CTRL BIT(14) @@ -1328,7 +1338,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) pll_writel(val, PLLE_SS_CTRL, pll); udelay(1); - /* TODO: enable hw control of xusb brick pll */ + /* Enable hw control of xusb brick pll */ + val = pll_readl_misc(pll); + val &= ~PLLE_MISC_IDDQ_SW_CTRL; + pll_writel_misc(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE); + val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL); + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + val |= PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + + val = pll_readl(XUSBIO_PLL_CFG0, pll); + val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET | + XUSBIO_PLL_CFG0_SEQ_START_STATE); + val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL | + XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL); + pll_writel(val, XUSBIO_PLL_CFG0, pll); + udelay(1); + val |= XUSBIO_PLL_CFG0_SEQ_ENABLE; + pll_writel(val, XUSBIO_PLL_CFG0, pll); out: if (pll->lock) diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c index 1fa5c3f33b20..adf6b814b5bc 100644 --- a/drivers/clk/tegra/clk-tegra-periph.c +++ b/drivers/clk/tegra/clk-tegra-periph.c @@ -329,7 +329,9 @@ static u32 mux_clkm_pllp_pllc_pllre_idx[] = { static const char *mux_clkm_48M_pllp_480M[] = { "clk_m", "pll_u_48M", "pll_p", "pll_u_480M" }; -#define mux_clkm_48M_pllp_480M_idx NULL +static u32 mux_clkm_48M_pllp_480M_idx[] = { + [0] = 0, [1] = 2, [2] = 4, [3] = 6, +}; static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = { "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref" @@ -338,6 +340,11 @@ static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = { [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7, }; +static const char *mux_ss_60M[] = { + "xusb_ss_div2", "pll_u_60M" +}; +#define mux_ss_60M_idx NULL + static const char *mux_d_audio_clk[] = { "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync", "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", @@ -499,6 +506,7 @@ static struct tegra_periph_init_data periph_clks[] = { XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src), XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src), XUSB("xusb_ss_src", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_ss_src), + NODIV("xusb_hs_src", mux_ss_60M, CLK_SOURCE_XUSB_SS_SRC, 25, MASK(1), 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_hs_src, NULL), XUSB("xusb_dev_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_dev_src), }; diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 80431f0fb268..b9c8ba258ef0 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -142,7 +142,6 @@ #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) #define CLK_SOURCE_CSITE 0x1d4 -#define CLK_SOURCE_XUSB_SS_SRC 0x610 #define CLK_SOURCE_EMC 0x19c /* PLLM override registers */ @@ -834,6 +833,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = { [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true }, [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA114_CLK_XUSB_SS_SRC, .present = true }, + [tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA114_CLK_XUSB_SS_DIV2, .present = true}, [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA114_CLK_XUSB_DEV_SRC, .present = true }, [tegra_clk_xusb_dev] = { .dt_id = TEGRA114_CLK_XUSB_DEV, .present = true }, [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA114_CLK_XUSB_HS_SRC, .present = true }, @@ -1182,16 +1182,11 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { struct clk *clk; - u32 val; - - /* xusb_hs_src */ - val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); - val |= BIT(25); /* always select PLLU_60M */ - writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); - clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, - 1, 1); - clks[TEGRA114_CLK_XUSB_HS_SRC] = clk; + /* xusb_ss_div2 */ + clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0, + 1, 2); + clks[TEGRA114_CLK_XUSB_SS_DIV2] = clk; /* dsia mux */ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, @@ -1301,7 +1296,12 @@ static struct tegra_clk_init_table init_table[] __initdata = { {TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0}, {TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0}, {TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0}, - + {TEGRA114_CLK_PLL_RE_VCO, TEGRA114_CLK_CLK_MAX, 612000000, 0}, + {TEGRA114_CLK_XUSB_SS_SRC, TEGRA114_CLK_PLL_RE_OUT, 122400000, 0}, + {TEGRA114_CLK_XUSB_FS_SRC, TEGRA114_CLK_PLL_U_48M, 48000000, 0}, + {TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0}, + {TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0}, + {TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0}, /* This MUST be the last entry. */ {TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0}, }; diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index cc37c342c4cb..80efe51fdcdf 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -30,7 +30,6 @@ #define CLK_SOURCE_CSITE 0x1d4 #define CLK_SOURCE_EMC 0x19c -#define CLK_SOURCE_XUSB_SS_SRC 0x610 #define PLLC_BASE 0x80 #define PLLC_OUT 0x84 @@ -925,6 +924,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = { [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true }, [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true }, [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true }, + [tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA124_CLK_XUSB_SS_DIV2, .present = true }, [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true }, [tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true }, [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true }, @@ -1105,16 +1105,11 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base) { struct clk *clk; - u32 val; - - /* xusb_hs_src */ - val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); - val |= BIT(25); /* always select PLLU_60M */ - writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); - clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, - 1, 1); - clks[TEGRA124_CLK_XUSB_HS_SRC] = clk; + /* xusb_ss_div2 */ + clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0, + 1, 2); + clks[TEGRA124_CLK_XUSB_SS_DIV2] = clk; /* dsia mux */ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, @@ -1368,6 +1363,12 @@ static struct tegra_clk_init_table init_table[] __initdata = { {TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1}, {TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0}, {TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0}, + {TEGRA124_CLK_PLL_RE_VCO, TEGRA124_CLK_CLK_MAX, 672000000, 0}, + {TEGRA124_CLK_XUSB_SS_SRC, TEGRA124_CLK_PLL_U_480M, 120000000, 0}, + {TEGRA124_CLK_XUSB_FS_SRC, TEGRA124_CLK_PLL_U_48M, 48000000, 0}, + {TEGRA124_CLK_XUSB_HS_SRC, TEGRA124_CLK_PLL_U_60M, 60000000, 0}, + {TEGRA124_CLK_XUSB_FALCON_SRC, TEGRA124_CLK_PLL_RE_OUT, 224000000, 0}, + {TEGRA124_CLK_XUSB_HOST_SRC, TEGRA124_CLK_PLL_RE_OUT, 112000000, 0}, /* This MUST be the last entry. */ {TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0}, }; diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index a820b0cfcf57..bc96f103bd7c 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -140,6 +140,7 @@ struct clk *icst_clk_register(struct device *dev, pclone = kmemdup(desc->params, sizeof(*pclone), GFP_KERNEL); if (!pclone) { + kfree(icst); pr_err("could not clone ICST params\n"); return ERR_PTR(-ENOMEM); } @@ -160,3 +161,4 @@ struct clk *icst_clk_register(struct device *dev, return clk; } +EXPORT_SYMBOL_GPL(icst_clk_register); diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c index 31b44f025f9e..1cc1330dc570 100644 --- a/drivers/clk/versatile/clk-impd1.c +++ b/drivers/clk/versatile/clk-impd1.c @@ -20,6 +20,8 @@ #define IMPD1_LOCK 0x08 struct impd1_clk { + char *pclkname; + struct clk *pclk; char *vco1name; struct clk *vco1clk; char *vco2name; @@ -31,7 +33,7 @@ struct impd1_clk { struct clk *spiclk; char *scname; struct clk *scclk; - struct clk_lookup *clks[6]; + struct clk_lookup *clks[15]; }; /* One entry for each connected IM-PD1 LM */ @@ -86,6 +88,7 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) { struct impd1_clk *imc; struct clk *clk; + struct clk *pclk; int i; if (id > 3) { @@ -94,11 +97,18 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) } imc = &impd1_clks[id]; + /* Register the fixed rate PCLK */ + imc->pclkname = kasprintf(GFP_KERNEL, "lm%x-pclk", id); + pclk = clk_register_fixed_rate(NULL, imc->pclkname, NULL, + CLK_IS_ROOT, 0); + imc->pclk = pclk; + imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id); clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL, base); imc->vco1clk = clk; - imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id); + imc->clks[0] = clkdev_alloc(pclk, "apb_pclk", "lm%x:01000", id); + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:01000", id); /* VCO2 is also called "CLK2" */ imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id); @@ -107,32 +117,43 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id) imc->vco2clk = clk; /* MMCI uses CLK2 right off */ - imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00700", id); + imc->clks[2] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00700", id); + imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00700", id); /* UART reference clock divides CLK2 by a fixed factor 4 */ imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id); clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 4); imc->uartclk = clk; - imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00100", id); - imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + imc->clks[4] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00100", id); + imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00100", id); + imc->clks[6] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00200", id); + imc->clks[7] = clkdev_alloc(clk, NULL, "lm%x:00200", id); /* SPI PL022 clock divides CLK2 by a fixed factor 64 */ imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id); clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 64); - imc->clks[4] = clkdev_alloc(clk, NULL, "lm%x:00300", id); + imc->clks[8] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00300", id); + imc->clks[9] = clkdev_alloc(clk, NULL, "lm%x:00300", id); + + /* The GPIO blocks and AACI have only PCLK */ + imc->clks[10] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00400", id); + imc->clks[11] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00500", id); + imc->clks[12] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00800", id); /* Smart Card clock divides CLK2 by a fixed factor 4 */ imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id); clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name, CLK_IGNORE_UNUSED, 1, 4); imc->scclk = clk; - imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00600", id); + imc->clks[13] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00600", id); + imc->clks[14] = clkdev_alloc(clk, NULL, "lm%x:00600", id); for (i = 0; i < ARRAY_SIZE(imc->clks); i++) clkdev_add(imc->clks[i]); } +EXPORT_SYMBOL_GPL(integrator_impd1_clk_init); void integrator_impd1_clk_exit(unsigned int id) { @@ -149,9 +170,12 @@ void integrator_impd1_clk_exit(unsigned int id) clk_unregister(imc->uartclk); clk_unregister(imc->vco2clk); clk_unregister(imc->vco1clk); + clk_unregister(imc->pclk); kfree(imc->scname); kfree(imc->spiname); kfree(imc->uartname); kfree(imc->vco2name); kfree(imc->vco1name); + kfree(imc->pclkname); } +EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit); diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 52c09afdcfb7..246cf1226eaa 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -53,6 +53,9 @@ static void __iomem *zynq_clkc_base; #define NUM_MIO_PINS 54 +#define DBG_CLK_CTRL_CLKACT_TRC BIT(0) +#define DBG_CLK_CTRL_CPU_1XCLKACT BIT(1) + enum zynq_clk { armpll, ddrpll, iopll, cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, @@ -499,6 +502,15 @@ static void __init zynq_clk_setup(struct device_node *np) clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, &dbgclk_lock); + /* leave debug clocks in the state the bootloader set them up to */ + tmp = clk_readl(SLCR_DBG_CLK_CTRL); + if (tmp & DBG_CLK_CTRL_CLKACT_TRC) + if (clk_prepare_enable(clks[dbg_trc])) + pr_warn("%s: trace clk enable failed\n", __func__); + if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT) + if (clk_prepare_enable(clks[dbg_apb])) + pr_warn("%s: debug APB clk enable failed\n", __func__); + /* One gated clock for all APER clocks. */ clks[dma] = clk_register_gate(NULL, clk_output_name[dma], clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b675882307e4..779368b683d0 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -701,3 +701,10 @@ config MMC_REALTEK_USB help Say Y here to include driver code to support SD/MMC card interface of Realtek RTS5129/39 series card reader + +config MMC_SUNXI + tristate "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3eb48b656f25..61cbc241935b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c new file mode 100644 index 000000000000..024f67c98cdc --- /dev/null +++ b/drivers/mmc/host/sunxi-mmc.c @@ -0,0 +1,1049 @@ +/* + * Driver for sunxi SD/MMC host controllers + * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd. + * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com> + * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch> + * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch> + * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <linux/clk.h> +#include <linux/clk-private.h> +#include <linux/clk/sunxi.h> + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/scatterlist.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/reset.h> + +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/core.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> + +/* register offset definitions */ +#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */ +#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */ +#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */ +#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */ +#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */ +#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */ +#define SDXC_REG_CMDR (0x18) /* SMC Command Register */ +#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */ +#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */ +#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */ +#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */ +#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */ +#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */ +#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */ +#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */ +#define SDXC_REG_STAS (0x3C) /* SMC Status Register */ +#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */ +#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */ +#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */ +#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */ +#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */ +#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */ +#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */ +#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */ +#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */ +#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */ +#define SDXC_REG_CHDA (0x90) +#define SDXC_REG_CBDA (0x94) + +#define mmc_readl(host, reg) \ + readl((host)->reg_base + SDXC_##reg) +#define mmc_writel(host, reg, value) \ + writel((value), (host)->reg_base + SDXC_##reg) + +/* global control register bits */ +#define SDXC_SOFT_RESET BIT(0) +#define SDXC_FIFO_RESET BIT(1) +#define SDXC_DMA_RESET BIT(2) +#define SDXC_INTERRUPT_ENABLE_BIT BIT(4) +#define SDXC_DMA_ENABLE_BIT BIT(5) +#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8) +#define SDXC_POSEDGE_LATCH_DATA BIT(9) +#define SDXC_DDR_MODE BIT(10) +#define SDXC_MEMORY_ACCESS_DONE BIT(29) +#define SDXC_ACCESS_DONE_DIRECT BIT(30) +#define SDXC_ACCESS_BY_AHB BIT(31) +#define SDXC_ACCESS_BY_DMA (0 << 31) +#define SDXC_HARDWARE_RESET \ + (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET) + +/* clock control bits */ +#define SDXC_CARD_CLOCK_ON BIT(16) +#define SDXC_LOW_POWER_ON BIT(17) + +/* bus width */ +#define SDXC_WIDTH1 0 +#define SDXC_WIDTH4 1 +#define SDXC_WIDTH8 2 + +/* smc command bits */ +#define SDXC_RESP_EXPIRE BIT(6) +#define SDXC_LONG_RESPONSE BIT(7) +#define SDXC_CHECK_RESPONSE_CRC BIT(8) +#define SDXC_DATA_EXPIRE BIT(9) +#define SDXC_WRITE BIT(10) +#define SDXC_SEQUENCE_MODE BIT(11) +#define SDXC_SEND_AUTO_STOP BIT(12) +#define SDXC_WAIT_PRE_OVER BIT(13) +#define SDXC_STOP_ABORT_CMD BIT(14) +#define SDXC_SEND_INIT_SEQUENCE BIT(15) +#define SDXC_UPCLK_ONLY BIT(21) +#define SDXC_READ_CEATA_DEV BIT(22) +#define SDXC_CCS_EXPIRE BIT(23) +#define SDXC_ENABLE_BIT_BOOT BIT(24) +#define SDXC_ALT_BOOT_OPTIONS BIT(25) +#define SDXC_BOOT_ACK_EXPIRE BIT(26) +#define SDXC_BOOT_ABORT BIT(27) +#define SDXC_VOLTAGE_SWITCH BIT(28) +#define SDXC_USE_HOLD_REGISTER BIT(29) +#define SDXC_START BIT(31) + +/* interrupt bits */ +#define SDXC_RESP_ERROR BIT(1) +#define SDXC_COMMAND_DONE BIT(2) +#define SDXC_DATA_OVER BIT(3) +#define SDXC_TX_DATA_REQUEST BIT(4) +#define SDXC_RX_DATA_REQUEST BIT(5) +#define SDXC_RESP_CRC_ERROR BIT(6) +#define SDXC_DATA_CRC_ERROR BIT(7) +#define SDXC_RESP_TIMEOUT BIT(8) +#define SDXC_DATA_TIMEOUT BIT(9) +#define SDXC_VOLTAGE_CHANGE_DONE BIT(10) +#define SDXC_FIFO_RUN_ERROR BIT(11) +#define SDXC_HARD_WARE_LOCKED BIT(12) +#define SDXC_START_BIT_ERROR BIT(13) +#define SDXC_AUTO_COMMAND_DONE BIT(14) +#define SDXC_END_BIT_ERROR BIT(15) +#define SDXC_SDIO_INTERRUPT BIT(16) +#define SDXC_CARD_INSERT BIT(30) +#define SDXC_CARD_REMOVE BIT(31) +#define SDXC_INTERRUPT_ERROR_BIT \ + (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \ + SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \ + SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR) +#define SDXC_INTERRUPT_DONE_BIT \ + (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \ + SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE) + +/* status */ +#define SDXC_RXWL_FLAG BIT(0) +#define SDXC_TXWL_FLAG BIT(1) +#define SDXC_FIFO_EMPTY BIT(2) +#define SDXC_FIFO_FULL BIT(3) +#define SDXC_CARD_PRESENT BIT(8) +#define SDXC_CARD_DATA_BUSY BIT(9) +#define SDXC_DATA_FSM_BUSY BIT(10) +#define SDXC_DMA_REQUEST BIT(31) +#define SDXC_FIFO_SIZE 16 + +/* Function select */ +#define SDXC_CEATA_ON (0xceaa << 16) +#define SDXC_SEND_IRQ_RESPONSE BIT(0) +#define SDXC_SDIO_READ_WAIT BIT(1) +#define SDXC_ABORT_READ_DATA BIT(2) +#define SDXC_SEND_CCSD BIT(8) +#define SDXC_SEND_AUTO_STOPCCSD BIT(9) +#define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10) + +/* IDMA controller bus mod bit field */ +#define SDXC_IDMAC_SOFT_RESET BIT(0) +#define SDXC_IDMAC_FIX_BURST BIT(1) +#define SDXC_IDMAC_IDMA_ON BIT(7) +#define SDXC_IDMAC_REFETCH_DES BIT(31) + +/* IDMA status bit field */ +#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0) +#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1) +#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2) +#define SDXC_IDMAC_DESTINATION_INVALID BIT(4) +#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5) +#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8) +#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9) +#define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10) +#define SDXC_IDMAC_IDLE (0 << 13) +#define SDXC_IDMAC_SUSPEND (1 << 13) +#define SDXC_IDMAC_DESC_READ (2 << 13) +#define SDXC_IDMAC_DESC_CHECK (3 << 13) +#define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13) +#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13) +#define SDXC_IDMAC_READ (6 << 13) +#define SDXC_IDMAC_WRITE (7 << 13) +#define SDXC_IDMAC_DESC_CLOSE (8 << 13) + +/* +* If the idma-des-size-bits of property is ie 13, bufsize bits are: +* Bits 0-12: buf1 size +* Bits 13-25: buf2 size +* Bits 26-31: not used +* Since we only ever set buf1 size, we can simply store it directly. +*/ +#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */ +#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */ +#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */ +#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */ +#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */ +#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */ +#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */ + +struct sunxi_idma_des { + u32 config; + u32 buf_size; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + struct mmc_host *mmc; + struct reset_control *reset; + + /* IO mapping base */ + void __iomem *reg_base; + + /* clock management */ + struct clk *clk_ahb; + struct clk *clk_mmc; + + /* irq */ + spinlock_t lock; + int irq; + u32 int_sum; + u32 sdio_imask; + + /* dma */ + u32 idma_des_size_bits; + dma_addr_t sg_dma; + void *sg_cpu; + bool wait_dma; + + struct mmc_request *mrq; + struct mmc_request *manual_stop_mrq; + int ferror; +}; + +static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + mmc_writel(host, REG_CMDR, SDXC_HARDWARE_RESET); + do { + rval = mmc_readl(host, REG_GCTRL); + } while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET)); + + if (rval & SDXC_HARDWARE_RESET) { + dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_init_host(struct mmc_host *mmc) +{ + u32 rval; + struct sunxi_mmc_host *host = mmc_priv(mmc); + + if (sunxi_mmc_reset_host(host)) + return -EIO; + + mmc_writel(host, REG_FTRGL, 0x20070008); + mmc_writel(host, REG_TMOUT, 0xffffffff); + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_RINTR, 0xffffffff); + mmc_writel(host, REG_DBGC, 0xdeb); + mmc_writel(host, REG_FUNS, SDXC_CEATA_ON); + mmc_writel(host, REG_DLBA, host->sg_dma); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_INTERRUPT_ENABLE_BIT; + rval &= ~SDXC_ACCESS_DONE_DIRECT; + mmc_writel(host, REG_GCTRL, rval); + + return 0; +} + +static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu; + struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; + int i, max_len = (1 << host->idma_des_size_bits); + + for (i = 0; i < data->sg_len; i++) { + pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN | + SDXC_IDMAC_DES0_DIC; + + if (data->sg[i].length == max_len) + pdes[i].buf_size = 0; /* 0 == max_len */ + else + pdes[i].buf_size = data->sg[i].length; + + pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]); + pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1]; + } + + pdes[0].config |= SDXC_IDMAC_DES0_FD; + pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD; + + /* + * Avoid the io-store starting the idmac hitting io-mem before the + * descriptors hit the main-mem. + */ + wmb(); +} + +static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data) +{ + if (data->flags & MMC_DATA_WRITE) + return DMA_TO_DEVICE; + else + return DMA_FROM_DEVICE; +} + +static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 i, dma_len; + struct scatterlist *sg; + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + if (dma_len == 0) { + dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n"); + return -ENOMEM; + } + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + dev_err(mmc_dev(host->mmc), + "unaligned scatterlist: os %x length %d\n", + sg->offset, sg->length); + return -EINVAL; + } + } + + return 0; +} + +static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 rval; + + sunxi_mmc_init_idma_des(host, data); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + + mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET); + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT); + + mmc_writel(host, REG_DMAC, + SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON); +} + +static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host, + struct mmc_request *req) +{ + u32 arg, cmd_val, ri; + unsigned long expire = jiffies + msecs_to_jiffies(1000); + + cmd_val = SDXC_START | SDXC_RESP_EXPIRE | + SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC; + + if (req->cmd->opcode == SD_IO_RW_EXTENDED) { + cmd_val |= SD_IO_RW_DIRECT; + arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) | + ((req->cmd->arg >> 28) & 0x7); + } else { + cmd_val |= MMC_STOP_TRANSMISSION; + arg = 0; + } + + mmc_writel(host, REG_CARG, arg); + mmc_writel(host, REG_CMDR, cmd_val); + + do { + ri = mmc_readl(host, REG_RINTR); + } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) && + time_before(jiffies, expire)); + + if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) { + dev_err(mmc_dev(host->mmc), "send stop command failed\n"); + if (req->stop) + req->stop->resp[0] = -ETIMEDOUT; + } else { + if (req->stop) + req->stop->resp[0] = mmc_readl(host, REG_RESP0); + } + + mmc_writel(host, REG_RINTR, 0xffff); +} + +static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + struct mmc_data *data = host->mrq->data; + + /* For some cmds timeout is normal with sd/mmc cards */ + if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) == + SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT)) + return; + + dev_err(mmc_dev(host->mmc), + "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n", + host->mmc->index, cmd->opcode, + data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "", + host->int_sum & SDXC_RESP_ERROR ? " RE" : "", + host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "", + host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "", + host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "", + host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "", + host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "", + host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "", + host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "", + host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : "" + ); +} + +/* Called in interrupt context! */ +static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + u32 rval; + + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_IDIE, 0); + + if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) { + sunxi_mmc_dump_errinfo(host); + mrq->cmd->error = -ETIMEDOUT; + + if (data) { + data->error = -ETIMEDOUT; + host->manual_stop_mrq = mrq; + } + + if (mrq->stop) + mrq->stop->error = -ETIMEDOUT; + } else { + if (mrq->cmd->flags & MMC_RSP_136) { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3); + mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2); + mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1); + mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0); + } else { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0); + } + + if (data) + data->bytes_xfered = data->blocks * data->blksz; + } + + if (data) { + mmc_writel(host, REG_IDST, 0x337); + mmc_writel(host, REG_DMAC, 0); + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + rval &= ~SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_FIFO_RESET; + mmc_writel(host, REG_GCTRL, rval); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + } + + mmc_writel(host, REG_RINTR, 0xffff); + + host->mrq = NULL; + host->int_sum = 0; + host->wait_dma = false; + + return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED; +} + +static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + u32 msk_int, idma_int; + bool finalize = false; + bool sdio_int = false; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&host->lock); + + idma_int = mmc_readl(host, REG_IDST); + msk_int = mmc_readl(host, REG_MISTA); + + dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n", + host->mrq, msk_int, idma_int); + + mrq = host->mrq; + if (mrq) { + if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT) + host->wait_dma = false; + + host->int_sum |= msk_int; + + /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */ + if ((host->int_sum & SDXC_RESP_TIMEOUT) && + !(host->int_sum & SDXC_COMMAND_DONE)) + mmc_writel(host, REG_IMASK, + host->sdio_imask | SDXC_COMMAND_DONE); + /* Don't wait for dma on error */ + else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) + finalize = true; + else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) && + !host->wait_dma) + finalize = true; + } + + if (msk_int & SDXC_SDIO_INTERRUPT) + sdio_int = true; + + mmc_writel(host, REG_RINTR, msk_int); + mmc_writel(host, REG_IDST, idma_int); + + if (finalize) + ret = sunxi_mmc_finalize_request(host); + + spin_unlock(&host->lock); + + if (finalize && ret == IRQ_HANDLED) + mmc_request_done(host->mmc, mrq); + + if (sdio_int) + mmc_signal_sdio_irq(host->mmc); + + return ret; +} + +static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + unsigned long iflags; + + spin_lock_irqsave(&host->lock, iflags); + mrq = host->manual_stop_mrq; + spin_unlock_irqrestore(&host->lock, iflags); + + if (!mrq) { + dev_err(mmc_dev(host->mmc), "no request for manual stop\n"); + return IRQ_HANDLED; + } + + dev_err(mmc_dev(host->mmc), "data error, sending stop command\n"); + sunxi_mmc_send_manual_stop(host, mrq); + + spin_lock_irqsave(&host->lock, iflags); + host->manual_stop_mrq = NULL; + spin_unlock_irqrestore(&host->lock, iflags); + + mmc_request_done(host->mmc, mrq); + + return IRQ_HANDLED; +} + +static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + rval = mmc_readl(host, REG_CLKCR); + rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); + + if (oclk_en) + rval |= SDXC_CARD_CLOCK_ON; + + mmc_writel(host, REG_CLKCR, rval); + + rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER; + mmc_writel(host, REG_CMDR, rval); + + do { + rval = mmc_readl(host, REG_CMDR); + } while (time_before(jiffies, expire) && (rval & SDXC_START)); + + /* clear irq status bits set by the command */ + mmc_writel(host, REG_RINTR, + mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT); + + if (rval & SDXC_START) { + dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, + struct mmc_ios *ios) +{ + u32 rate, oclk_dly, rval, sclk_dly, src_clk; + int ret; + + rate = clk_round_rate(host->clk_mmc, ios->clock); + dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %d\n", + ios->clock, rate); + + /* setting clock rate */ + ret = clk_set_rate(host->clk_mmc, rate); + if (ret) { + dev_err(mmc_dev(host->mmc), "error setting clk to %d: %d\n", + rate, ret); + return ret; + } + + ret = sunxi_mmc_oclk_onoff(host, 0); + if (ret) + return ret; + + /* clear internal divider */ + rval = mmc_readl(host, REG_CLKCR); + rval &= ~0xff; + mmc_writel(host, REG_CLKCR, rval); + + /* determine delays */ + if (rate <= 400000) { + oclk_dly = 0; + sclk_dly = 7; + } else if (rate <= 25000000) { + oclk_dly = 0; + sclk_dly = 5; + } else if (rate <= 50000000) { + if (ios->timing == MMC_TIMING_UHS_DDR50) { + oclk_dly = 2; + sclk_dly = 4; + } else { + oclk_dly = 3; + sclk_dly = 5; + } + } else { + /* rate > 50000000 */ + oclk_dly = 2; + sclk_dly = 4; + } + + src_clk = clk_get_rate(clk_get_parent(host->clk_mmc)); + if (src_clk >= 300000000 && src_clk <= 400000000) { + if (oclk_dly) + oclk_dly--; + if (sclk_dly) + sclk_dly--; + } + + clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly); + + return sunxi_mmc_oclk_onoff(host, 1); +} + +static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + u32 rval; + + /* Set the power state */ + switch (ios->power_mode) { + case MMC_POWER_ON: + break; + + case MMC_POWER_UP: + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + host->ferror = sunxi_mmc_init_host(mmc); + if (host->ferror) + return; + + dev_dbg(mmc_dev(mmc), "power on!\n"); + break; + + case MMC_POWER_OFF: + dev_dbg(mmc_dev(mmc), "power off!\n"); + sunxi_mmc_reset_host(host); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + break; + } + + /* set bus width */ + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH1); + break; + case MMC_BUS_WIDTH_4: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH4); + break; + case MMC_BUS_WIDTH_8: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH8); + break; + } + + /* set ddr mode */ + rval = mmc_readl(host, REG_GCTRL); + if (ios->timing == MMC_TIMING_UHS_DDR50) + rval |= SDXC_DDR_MODE; + else + rval &= ~SDXC_DDR_MODE; + mmc_writel(host, REG_GCTRL, rval); + + /* set up clock */ + if (ios->clock && ios->power_mode) { + host->ferror = sunxi_mmc_clk_set_rate(host, ios); + /* Android code had a usleep_range(50000, 55000); here */ + } +} + +static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + unsigned long flags; + u32 imask; + + spin_lock_irqsave(&host->lock, flags); + + imask = mmc_readl(host, REG_IMASK); + if (enable) { + host->sdio_imask = SDXC_SDIO_INTERRUPT; + imask |= SDXC_SDIO_INTERRUPT; + } else { + host->sdio_imask = 0; + imask &= ~SDXC_SDIO_INTERRUPT; + } + mmc_writel(host, REG_IMASK, imask); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sunxi_mmc_hw_reset(struct mmc_host *mmc) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + mmc_writel(host, REG_HWRST, 0); + udelay(10); + mmc_writel(host, REG_HWRST, 1); + udelay(300); +} + +static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned long iflags; + u32 imask = SDXC_INTERRUPT_ERROR_BIT; + u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f); + int ret; + + /* Check for set_ios errors (should never happen) */ + if (host->ferror) { + mrq->cmd->error = host->ferror; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + ret = sunxi_mmc_map_dma(host, data); + if (ret < 0) { + dev_err(mmc_dev(mmc), "map DMA failed\n"); + cmd->error = ret; + data->error = ret; + mmc_request_done(mmc, mrq); + return; + } + } + + if (cmd->opcode == MMC_GO_IDLE_STATE) { + cmd_val |= SDXC_SEND_INIT_SEQUENCE; + imask |= SDXC_COMMAND_DONE; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + cmd_val |= SDXC_RESP_EXPIRE; + if (cmd->flags & MMC_RSP_136) + cmd_val |= SDXC_LONG_RESPONSE; + if (cmd->flags & MMC_RSP_CRC) + cmd_val |= SDXC_CHECK_RESPONSE_CRC; + + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) { + cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER; + if (cmd->data->flags & MMC_DATA_STREAM) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEQUENCE_MODE | + SDXC_SEND_AUTO_STOP; + } + + if (cmd->data->stop) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEND_AUTO_STOP; + } else { + imask |= SDXC_DATA_OVER; + } + + if (cmd->data->flags & MMC_DATA_WRITE) + cmd_val |= SDXC_WRITE; + else + host->wait_dma = true; + } else { + imask |= SDXC_COMMAND_DONE; + } + } else { + imask |= SDXC_COMMAND_DONE; + } + + dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n", + cmd_val & 0x3f, cmd_val, cmd->arg, imask, + mrq->data ? mrq->data->blksz * mrq->data->blocks : 0); + + spin_lock_irqsave(&host->lock, iflags); + + if (host->mrq || host->manual_stop_mrq) { + spin_unlock_irqrestore(&host->lock, iflags); + + if (data) + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + + dev_err(mmc_dev(mmc), "request already pending\n"); + mrq->cmd->error = -EBUSY; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + mmc_writel(host, REG_BLKSZ, data->blksz); + mmc_writel(host, REG_BCNTR, data->blksz * data->blocks); + sunxi_mmc_start_dma(host, data); + } + + host->mrq = mrq; + mmc_writel(host, REG_IMASK, host->sdio_imask | imask); + mmc_writel(host, REG_CARG, cmd->arg); + mmc_writel(host, REG_CMDR, cmd_val); + + spin_unlock_irqrestore(&host->lock, iflags); +} + +static const struct of_device_id sunxi_mmc_of_match[] = { + { .compatible = "allwinner,sun4i-a10-mmc", }, + { .compatible = "allwinner,sun5i-a13-mmc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match); + +static struct mmc_host_ops sunxi_mmc_ops = { + .request = sunxi_mmc_request, + .set_ios = sunxi_mmc_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, + .enable_sdio_irq = sunxi_mmc_enable_sdio_irq, + .hw_reset = sunxi_mmc_hw_reset, +}; + +static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc")) + host->idma_des_size_bits = 13; + else + host->idma_des_size_bits = 16; + + ret = mmc_regulator_get_supply(host->mmc); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Could not get vmmc supply\n"); + return ret; + } + + host->reg_base = devm_ioremap_resource(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(host->reg_base)) + return PTR_ERR(host->reg_base); + + host->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(host->clk_ahb)) { + dev_err(&pdev->dev, "Could not get ahb clock\n"); + return PTR_ERR(host->clk_ahb); + } + + host->clk_mmc = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(host->clk_mmc)) { + dev_err(&pdev->dev, "Could not get mmc clock\n"); + return PTR_ERR(host->clk_mmc); + } + + host->reset = devm_reset_control_get(&pdev->dev, "ahb"); + + ret = clk_prepare_enable(host->clk_ahb); + if (ret) { + dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(host->clk_mmc); + if (ret) { + dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret); + goto error_disable_clk_ahb; + } + + if (!IS_ERR(host->reset)) { + ret = reset_control_deassert(host->reset); + if (ret) { + dev_err(&pdev->dev, "reset err %d\n", ret); + goto error_disable_clk_mmc; + } + } + + /* + * Sometimes the controller asserts the irq on boot for some reason, + * make sure the controller is in a sane state before enabling irqs. + */ + ret = sunxi_mmc_reset_host(host); + if (ret) + goto error_assert_reset; + + host->irq = platform_get_irq(pdev, 0); + return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq, + sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host); + +error_assert_reset: + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); +error_disable_clk_mmc: + clk_disable_unprepare(host->clk_mmc); +error_disable_clk_ahb: + clk_disable_unprepare(host->clk_ahb); + return ret; +} + +static int sunxi_mmc_probe(struct platform_device *pdev) +{ + struct sunxi_mmc_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "mmc alloc host failed\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + spin_lock_init(&host->lock); + + ret = sunxi_mmc_resource_request(host, pdev); + if (ret) + goto error_free_host; + + host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, + &host->sg_dma, GFP_KERNEL); + if (!host->sg_cpu) { + dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n"); + ret = -ENOMEM; + goto error_free_host; + } + + mmc->ops = &sunxi_mmc_ops; + mmc->max_blk_count = 8192; + mmc->max_blk_size = 4096; + mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des); + mmc->max_seg_size = (1 << host->idma_des_size_bits); + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; + /* 400kHz ~ 50MHz */ + mmc->f_min = 400000; + mmc->f_max = 50000000; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + ret = mmc_of_parse(mmc); + if (ret) + goto error_free_dma; + + ret = mmc_add_host(mmc); + if (ret) + goto error_free_dma; + + dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq); + platform_set_drvdata(pdev, mmc); + return 0; + +error_free_dma: + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); +error_free_host: + mmc_free_host(mmc); + return ret; +} + +static int sunxi_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct sunxi_mmc_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + disable_irq(host->irq); + sunxi_mmc_reset_host(host); + + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); + + clk_disable_unprepare(host->clk_mmc); + clk_disable_unprepare(host->clk_ahb); + + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + mmc_free_host(mmc); + + return 0; +} + +static struct platform_driver sunxi_mmc_driver = { + .driver = { + .name = "sunxi-mmc", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sunxi_mmc_of_match), + }, + .probe = sunxi_mmc_probe, + .remove = sunxi_mmc_remove, +}; +module_platform_driver(sunxi_mmc_driver); + +MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("David Lanzend�rfer <david.lanzendoerfer@o2s.ch>"); +MODULE_ALIAS("platform:sunxi-mmc"); diff --git a/include/dt-bindings/clock/bcm21664.h b/include/dt-bindings/clock/bcm21664.h new file mode 100644 index 000000000000..5a7f0e4750a8 --- /dev/null +++ b/include/dt-bindings/clock/bcm21664.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * Copyright 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CLOCK_BCM21664_H +#define _CLOCK_BCM21664_H + +/* + * This file defines the values used to specify clocks provided by + * the clock control units (CCUs) on Broadcom BCM21664 family SoCs. + */ + +/* bcm21664 CCU device tree "compatible" strings */ +#define BCM21664_DT_ROOT_CCU_COMPAT "brcm,bcm21664-root-ccu" +#define BCM21664_DT_AON_CCU_COMPAT "brcm,bcm21664-aon-ccu" +#define BCM21664_DT_MASTER_CCU_COMPAT "brcm,bcm21664-master-ccu" +#define BCM21664_DT_SLAVE_CCU_COMPAT "brcm,bcm21664-slave-ccu" + +/* root CCU clock ids */ + +#define BCM21664_ROOT_CCU_FRAC_1M 0 +#define BCM21664_ROOT_CCU_CLOCK_COUNT 1 + +/* aon CCU clock ids */ + +#define BCM21664_AON_CCU_HUB_TIMER 0 +#define BCM21664_AON_CCU_CLOCK_COUNT 1 + +/* master CCU clock ids */ + +#define BCM21664_MASTER_CCU_SDIO1 0 +#define BCM21664_MASTER_CCU_SDIO2 1 +#define BCM21664_MASTER_CCU_SDIO3 2 +#define BCM21664_MASTER_CCU_SDIO4 3 +#define BCM21664_MASTER_CCU_SDIO1_SLEEP 4 +#define BCM21664_MASTER_CCU_SDIO2_SLEEP 5 +#define BCM21664_MASTER_CCU_SDIO3_SLEEP 6 +#define BCM21664_MASTER_CCU_SDIO4_SLEEP 7 +#define BCM21664_MASTER_CCU_CLOCK_COUNT 8 + +/* slave CCU clock ids */ + +#define BCM21664_SLAVE_CCU_UARTB 0 +#define BCM21664_SLAVE_CCU_UARTB2 1 +#define BCM21664_SLAVE_CCU_UARTB3 2 +#define BCM21664_SLAVE_CCU_BSC1 3 +#define BCM21664_SLAVE_CCU_BSC2 4 +#define BCM21664_SLAVE_CCU_BSC3 5 +#define BCM21664_SLAVE_CCU_BSC4 6 +#define BCM21664_SLAVE_CCU_CLOCK_COUNT 7 + +#endif /* _CLOCK_BCM21664_H */ diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h index e0096940886d..a763460cf1af 100644 --- a/include/dt-bindings/clock/bcm281xx.h +++ b/include/dt-bindings/clock/bcm281xx.h @@ -20,6 +20,18 @@ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs. */ +/* + * These are the bcm281xx CCU device tree "compatible" strings. + * We're stuck with using "bcm11351" in the string because wild + * cards aren't allowed, and that name was the first one defined + * in this family of devices. + */ +#define BCM281XX_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu" +#define BCM281XX_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu" +#define BCM281XX_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu" +#define BCM281XX_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu" +#define BCM281XX_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu" + /* root CCU clock ids */ #define BCM281XX_ROOT_CCU_FRAC_1M 0 diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h new file mode 100644 index 000000000000..aad579a75802 --- /dev/null +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __DTS_HIX5HD2_CLOCK_H +#define __DTS_HIX5HD2_CLOCK_H + +/* fixed rate */ +#define HIX5HD2_FIXED_1200M 1 +#define HIX5HD2_FIXED_400M 2 +#define HIX5HD2_FIXED_48M 3 +#define HIX5HD2_FIXED_24M 4 +#define HIX5HD2_FIXED_600M 5 +#define HIX5HD2_FIXED_300M 6 +#define HIX5HD2_FIXED_75M 7 +#define HIX5HD2_FIXED_200M 8 +#define HIX5HD2_FIXED_100M 9 +#define HIX5HD2_FIXED_40M 10 +#define HIX5HD2_FIXED_150M 11 +#define HIX5HD2_FIXED_1728M 12 +#define HIX5HD2_FIXED_28P8M 13 +#define HIX5HD2_FIXED_432M 14 +#define HIX5HD2_FIXED_345P6M 15 +#define HIX5HD2_FIXED_288M 16 +#define HIX5HD2_FIXED_60M 17 +#define HIX5HD2_FIXED_750M 18 +#define HIX5HD2_FIXED_500M 19 +#define HIX5HD2_FIXED_54M 20 +#define HIX5HD2_FIXED_27M 21 +#define HIX5HD2_FIXED_1500M 22 +#define HIX5HD2_FIXED_375M 23 +#define HIX5HD2_FIXED_187M 24 +#define HIX5HD2_FIXED_250M 25 +#define HIX5HD2_FIXED_125M 26 +#define HIX5HD2_FIXED_2P02M 27 +#define HIX5HD2_FIXED_50M 28 +#define HIX5HD2_FIXED_25M 29 +#define HIX5HD2_FIXED_83M 30 + +/* mux clocks */ +#define HIX5HD2_SFC_MUX 64 +#define HIX5HD2_MMC_MUX 65 +#define HIX5HD2_FEPHY_MUX 66 + +/* gate clocks */ +#define HIX5HD2_SFC_RST 128 +#define HIX5HD2_SFC_CLK 129 +#define HIX5HD2_MMC_CIU_CLK 130 +#define HIX5HD2_MMC_BIU_CLK 131 +#define HIX5HD2_MMC_CIU_RST 132 + +#define HIX5HD2_NR_CLKS 256 +#endif /* __DTS_HIX5HD2_CLOCK_H */ diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h index 03bbf49d43b7..f9f547146a15 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8960.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h @@ -51,7 +51,7 @@ #define QDSS_TSCTR_CLK 34 #define SFAB_ADM0_M0_A_CLK 35 #define SFAB_ADM0_M1_A_CLK 36 -#define SFAB_ADM0_M2_A_CLK 37 +#define SFAB_ADM0_M2_H_CLK 37 #define ADM0_CLK 38 #define ADM0_PBUS_CLK 39 #define MSS_XPU_CLK 40 @@ -99,7 +99,7 @@ #define CFPB2_H_CLK 82 #define SFAB_CFPB_M_H_CLK 83 #define CFPB_MASTER_H_CLK 84 -#define SFAB_CFPB_S_HCLK 85 +#define SFAB_CFPB_S_H_CLK 85 #define CFPB_SPLITTER_H_CLK 86 #define TSIF_H_CLK 87 #define TSIF_INACTIVITY_TIMERS_CLK 88 @@ -110,7 +110,6 @@ #define CE1_SLEEP_CLK 93 #define CE2_H_CLK 94 #define CE2_CORE_CLK 95 -#define CE2_SLEEP_CLK 96 #define SFPB_H_CLK_SRC 97 #define SFPB_H_CLK 98 #define SFAB_SFPB_M_H_CLK 99 @@ -252,7 +251,7 @@ #define MSS_S_H_CLK 235 #define MSS_CXO_SRC_CLK 236 #define SATA_H_CLK 237 -#define SATA_SRC_CLK 238 +#define SATA_CLK_SRC 238 #define SATA_RXOOB_CLK 239 #define SATA_PMALIVE_CLK 240 #define SATA_PHY_REF_CLK 241 diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h index 223ca174d9d3..51e51c860fe6 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8974.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h @@ -316,5 +316,9 @@ #define GCC_CE2_CLK_SLEEP_ENA 299 #define GCC_CE2_AXI_CLK_SLEEP_ENA 300 #define GCC_CE2_AHB_CLK_SLEEP_ENA 301 +#define GPLL4 302 +#define GPLL4_VOTE 303 +#define GCC_SDCC1_CDCCAL_SLEEP_CLK 304 +#define GCC_SDCC1_CDCCAL_FF_CLK 305 #endif diff --git a/include/dt-bindings/clock/r8a7779-clock.h b/include/dt-bindings/clock/r8a7779-clock.h new file mode 100644 index 000000000000..381a6114237a --- /dev/null +++ b/include/dt-bindings/clock/r8a7779-clock.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2013 Horms Solutions Ltd. + * + * Contact: Simon Horman <horms@verge.net.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7779_H__ +#define __DT_BINDINGS_CLOCK_R8A7779_H__ + +/* CPG */ +#define R8A7779_CLK_PLLA 0 +#define R8A7779_CLK_Z 1 +#define R8A7779_CLK_ZS 2 +#define R8A7779_CLK_S 3 +#define R8A7779_CLK_S1 4 +#define R8A7779_CLK_P 5 +#define R8A7779_CLK_B 6 +#define R8A7779_CLK_OUT 7 + +/* MSTP 0 */ +#define R8A7779_CLK_HSPI 7 +#define R8A7779_CLK_TMU2 14 +#define R8A7779_CLK_TMU1 15 +#define R8A7779_CLK_TMU0 16 +#define R8A7779_CLK_HSCIF1 18 +#define R8A7779_CLK_HSCIF0 19 +#define R8A7779_CLK_SCIF5 21 +#define R8A7779_CLK_SCIF4 22 +#define R8A7779_CLK_SCIF3 23 +#define R8A7779_CLK_SCIF2 24 +#define R8A7779_CLK_SCIF1 25 +#define R8A7779_CLK_SCIF0 26 +#define R8A7779_CLK_I2C3 27 +#define R8A7779_CLK_I2C2 28 +#define R8A7779_CLK_I2C1 29 +#define R8A7779_CLK_I2C0 30 + +/* MSTP 1 */ +#define R8A7779_CLK_USB01 0 +#define R8A7779_CLK_USB2 1 +#define R8A7779_CLK_DU 3 +#define R8A7779_CLK_VIN2 8 +#define R8A7779_CLK_VIN1 9 +#define R8A7779_CLK_VIN0 10 +#define R8A7779_CLK_ETHER 14 +#define R8A7779_CLK_SATA 15 +#define R8A7779_CLK_PCIE 16 +#define R8A7779_CLK_VIN3 20 + +/* MSTP 3 */ +#define R8A7779_CLK_SDHI3 20 +#define R8A7779_CLK_SDHI2 21 +#define R8A7779_CLK_SDHI1 22 +#define R8A7779_CLK_SDHI0 23 +#define R8A7779_CLK_MMC1 30 +#define R8A7779_CLK_MMC0 31 + + +#endif /* __DT_BINDINGS_CLOCK_R8A7779_H__ */ diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 6d0d8d8ef31e..fc12621fb432 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -337,6 +337,7 @@ #define TEGRA114_CLK_CLK_OUT_3_MUX 308 #define TEGRA114_CLK_DSIA_MUX 309 #define TEGRA114_CLK_DSIB_MUX 310 -#define TEGRA114_CLK_CLK_MAX 311 +#define TEGRA114_CLK_XUSB_SS_DIV2 311 +#define TEGRA114_CLK_CLK_MAX 312 #endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h index 433528ab5161..8a4c5892890f 100644 --- a/include/dt-bindings/clock/tegra124-car.h +++ b/include/dt-bindings/clock/tegra124-car.h @@ -336,6 +336,7 @@ #define TEGRA124_CLK_DSIA_MUX 309 #define TEGRA124_CLK_DSIB_MUX 310 #define TEGRA124_CLK_SOR0_LVDS 311 -#define TEGRA124_CLK_CLK_MAX 312 +#define TEGRA124_CLK_XUSB_SS_DIV2 312 +#define TEGRA124_CLK_CLK_MAX 313 #endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h index a840e680323c..07edd0e65eed 100644 --- a/include/dt-bindings/reset/qcom,gcc-msm8960.h +++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h @@ -58,7 +58,7 @@ #define PPSS_PROC_RESET 41 #define PPSS_RESET 42 #define DMA_BAM_RESET 43 -#define SIC_TIC_RESET 44 +#define SPS_TIC_H_RESET 44 #define SLIMBUS_H_RESET 45 #define SFAB_CFPB_M_RESET 46 #define SFAB_CFPB_S_RESET 47 diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index f295bab1865d..0c287dbbb144 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -40,14 +40,14 @@ struct dentry; * through the clk_* api. * * @prepare: Prepare the clock for enabling. This must not return until - * the clock is fully prepared, and it's safe to call clk_enable. - * This callback is intended to allow clock implementations to - * do any initialisation that may sleep. Called with - * prepare_lock held. + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. * * @unprepare: Release the clock from its prepared state. This will typically - * undo any work done in the @prepare callback. Called with - * prepare_lock held. + * undo any work done in the @prepare callback. Called with + * prepare_lock held. * * @is_prepared: Queries the hardware to determine if the clock is prepared. * This function is allowed to sleep. Optional, if this op is not @@ -58,16 +58,16 @@ struct dentry; * Called with prepare mutex held. This function may sleep. * * @enable: Enable the clock atomically. This must not return until the - * clock is generating a valid clock signal, usable by consumer - * devices. Called with enable_lock held. This function must not - * sleep. + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. * * @disable: Disable the clock atomically. Called with enable_lock held. - * This function must not sleep. + * This function must not sleep. * * @is_enabled: Queries the hardware to determine if the clock is enabled. - * This function must not sleep. Optional, if this op is not - * set then the enable count will be used. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. * * @disable_unused: Disable the clock atomically. Only called from * clk_disable_unused for gate clocks with special needs. @@ -75,34 +75,35 @@ struct dentry; * sleep. * * @recalc_rate Recalculate the rate of this clock, by querying hardware. The - * parent rate is an input parameter. It is up to the caller to - * ensure that the prepare_mutex is held across this call. - * Returns the calculated rate. Optional, but recommended - if - * this op is not set then clock rate will be initialized to 0. + * parent rate is an input parameter. It is up to the caller to + * ensure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. * * @round_rate: Given a target rate as input, returns the closest rate actually - * supported by the clock. + * supported by the clock. The parent rate is an input/output + * parameter. * * @determine_rate: Given a target rate as input, returns the closest rate * actually supported by the clock, and optionally the parent clock * that should be used to provide the clock rate. * - * @get_parent: Queries the hardware to determine the parent of a clock. The - * return value is a u8 which specifies the index corresponding to - * the parent clock. This index can be applied to either the - * .parent_names or .parents arrays. In short, this function - * translates the parent value read from hardware into an array - * index. Currently only called when the clock is initialized by - * __clk_init. This callback is mandatory for clocks with - * multiple parents. It is optional (and unnecessary) for clocks - * with 0 or 1 parents. - * * @set_parent: Change the input source of this clock; for clocks with multiple - * possible parents specify a new parent by passing in the index - * as a u8 corresponding to the parent in either the .parent_names - * or .parents arrays. This function in affect translates an - * array index into the value programmed into the hardware. - * Returns 0 on success, -EERROR otherwise. + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. * * @set_rate: Change the rate of this clock. The requested rate is specified * by the second argument, which should typically be the return @@ -110,13 +111,6 @@ struct dentry; * which is likely helpful for most .set_rate implementation. * Returns 0 on success, -EERROR otherwise. * - * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy - * is expressed in ppb (parts per billion). The parent accuracy is - * an input parameter. - * Returns the calculated accuracy. Optional - if this op is not - * set then clock accuracy will be initialized to parent accuracy - * or 0 (perfect clock) if clock has no parent. - * * @set_rate_and_parent: Change the rate and the parent of this clock. The * requested rate is specified by the second argument, which * should typically be the return of .round_rate call. The @@ -128,6 +122,18 @@ struct dentry; * separately via calls to .set_parent and .set_rate. * Returns 0 on success, -EERROR otherwise. * + * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy + * is expressed in ppb (parts per billion). The parent accuracy is + * an input parameter. + * Returns the calculated accuracy. Optional - if this op is not + * set then clock accuracy will be initialized to parent accuracy + * or 0 (perfect clock) if clock has no parent. + * + * @init: Perform platform-specific initialization magic. + * This is not not used by any of the basic clock types. + * Please consider other ways of solving initialization problems + * before using this callback, as its use is discouraged. + * * @debug_init: Set up type-specific debugfs entries for this clock. This * is called once, after the debugfs directory entry for this * clock has been created. The dentry pointer representing that @@ -157,15 +163,15 @@ struct clk_ops { void (*disable_unused)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); - long (*round_rate)(struct clk_hw *hw, unsigned long, - unsigned long *); + long (*round_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate); long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long, - unsigned long); + int (*set_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate, u8 index); @@ -254,12 +260,12 @@ void of_fixed_clk_setup(struct device_node *np); * * Flags: * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to - * enable the clock. Setting this flag does the opposite: setting the bit - * disable the clock and clearing it enables the clock + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit - * of this register, and mask of gate bits are in higher 16-bit of this - * register. While setting the gate bits, higher 16-bit should also be - * updated to indicate changing gate bits. + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -298,20 +304,24 @@ struct clk_div_table { * * Flags: * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the - * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is - * the raw value read from the register, with the value of zero considered + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from - * the hardware register + * the hardware register * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit - * of this register, and mask of divider bits are in higher 16-bit of this - * register. While setting the divider bits, higher 16-bit should also be - * updated to indicate changing divider bits. + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. + * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded + * to the closest integer instead of the up one. + * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should + * not be changed by the clock framework. */ struct clk_divider { struct clk_hw hw; @@ -327,8 +337,11 @@ struct clk_divider { #define CLK_DIVIDER_POWER_OF_TWO BIT(1) #define CLK_DIVIDER_ALLOW_ZERO BIT(2) #define CLK_DIVIDER_HIWORD_MASK BIT(3) +#define CLK_DIVIDER_ROUND_CLOSEST BIT(4) +#define CLK_DIVIDER_READ_ONLY BIT(5) extern const struct clk_ops clk_divider_ops; +extern const struct clk_ops clk_divider_ro_ops; struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -356,9 +369,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this - * register, and mask of mux bits are in higher 16-bit of this register. - * While setting the mux bits, higher 16-bit should also be updated to - * indicate changing mux bits. + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw; diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h index f9bf080a1123..9f8a14041dd5 100644 --- a/include/linux/clk/shmobile.h +++ b/include/linux/clk/shmobile.h @@ -1,7 +1,9 @@ /* * Copyright 2013 Ideas On Board SPRL + * Copyright 2013, 2014 Horms Solutions Ltd. * * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Contact: Simon Horman <horms@verge.net.au> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,6 +16,7 @@ #include <linux/types.h> +void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); #endif diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..aed28c4451d9 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2013 - Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +#include <linux/clk.h> + +void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output); + +#endif |